Owners manual

www.amp-research.com
11/13
IM77238 rev 02.07.18
AMP RESEARCH POWERSTEP
TM
– Ram Crew Cab
Locate Green Connector Block under dash to the left of the steering column. The 2 pin plug off the OBD
harness will plug into one of the open ports on this green plug.
Plug 2 pin plug into the Green Connector Block. Use supplied Posi-Lock connectors to attach the Plug and
Play module to the Harness. Attach Matching colors on the harness to the wires on the module. Plug in
module to the OBD II port on the vehicle.
27
7
9
25
26
27
7
28
Secure harness with supplied
tie wraps. Make sure wires are
away from E-brake mechanism
and brake pedal assembly.