Specifications

Page 40

FIREFINDER SERIES II INSTALLATION, COMMISSIONING &

OPERATION

5.14.6 SmartTerminal Controls and Indicators

All controls, except for the Enable / Disable keyswitch, are of a momentary push button style.

Figure 45: SmartTerminal Front Panel Layout

5.14.7 SMARTTERMINAL Screen Format

There are 3 events that can be reported and displayed by SmartTerminal. The types of event are;

1. Fire

2. Faults

3. Disables.

The types of events are only associated with loop devices and detectors hence faults associated

with modules, loops O/C – S/C, power supplies and so forth are not reported on the LCD.

The SmartTerminal has front panel indicators for each type of event. When the SmartTerminal is

configured not to report a type of event and that event type is present (and the corresponding front

panel indicator is illuminated on the SmartTerminal), then a standard information screen is

displayed on the LCD stating the system is not normal and the operator should see the FACP.

FIRE: If configured the screen format for reporting fire condition is:

<point location> FIRE

<date> <time> CONTROL*

FIRE XXX OF XXX ZONE

Fault: If configured the screen format for reporting fault condition is:

<point location> FAULT

<date> <time> CONTROL*

FIRE XXX OF XXX ZONE

Note: The fault types only relate to devices.