Specifications

Page 55
FIREFINDER SERIES II INSTALLATION, COMMISSIONING &
OPERATION
DEVICE
DISABLE/ENABLE
This button is used to disable or re-enable selected individual
or groups of detectors, devices or zones.
LOOP
Press this button followed by a number to select the loop you wish to access e.g. LOOP 4.
SENSOR
After selecting the Loop number press this button to enter the sensor number for the device
to be interrogated.
ZONE
Press this button followed by a number e.g. ZONE 4 to select the required zone.
DISPLAY
Press this button after selecting the Zone number or the Loop and Sensor numbers to
display the state of the device.
8
WXYZ
These buttons are used to navigate around the panel’s menus and enter data. If entering a
descriptor, or some other data that contains characters as well as numbers, pressing the buttons
multiple times will scroll through the available letters written on the button, in sequence. E.g. 1, A, B,
C
TO
Use this button to access a range of devices. E.g., 2 TO 7.
ENTER
Press the ENTER button when using the panel, to enter data.
CANCEL ENTRY
The CANCEL ENTRY button is used to delete data in a current field or return to
the previously displayed menu.
Used to move the cursor back and forth when entering data in a field.
These buttons are used to move between fields when entering data.
FUNCTION MENU
Pressing the MENU button will display the main menu on the LCD. Similarly
pressing the FUNCTION button will display the function menu on the LCD.
LCD DISPLAY - This screen can be configured with the servicing company’s name and phone
number. It also displays the current date, time and that the system is normal (no faults and alarms).
If there are any faults or alarms the LCD will display the device in question, if multiple detectors or
zones are not in their normal state, the PREVIOUS and NEXT buttons are used to scroll through
them.
APS/ APH 26/2/2007 08:05:45
AMPAC
PH: [phone]
SYSTEM IS NORMAL
AC: 1S ALM: 000 PALM: 000 FLT: 000 DIS: 000