Specifications

Page 58
FIREFINDER SERIES II INSTALLATION, COMMISSIONING &
OPERATION
 Network Note: This option is only available if the system configuration is
networked.
 Is pressed to gain access to NETWORK STATUS.
Figure 62: Display Network Status
 Network Points:
Figure 63: Display Network Points
Network Points Screens are
 STATUS: Press, Select network point e.g. Loop Number
 POWER SUPPLY: Press to display Charger Volts, Battery Detected and Mains OK
 BRIGADE: Press to display Operational or Non-Operational
 Remote Slave Modules:
Select from Network Status Remote Slave Modules, then Module number, then ENTER.
Figure 64: Display Remote Module Status
 Remote External LED Mimic Modules:
Select from Network Status Remote External LED Mimic Modules, then NP number, then ENTER,
then External LED Mimic number, then ENTER
Apollo Loop 1
TYPE: APOLLO LOOP NO: 1 VER: 6.1
NP: 1 MOD: 4 STAT: NORMAL
REMOTE MODULE STATUS
AC: 2S ALM: 000 PALM: 000 FLT: 000 DIS: 000
DISPLAY NETWORK POINTS
0: STATUS 1: POWER SUPPLY 2: BRIGADE
SELECT NO.
AC: 2S ALM: 000 PALM: 000 FLT: 000 DIS: 000
DISPLAY NETWORK STATUS
0: NETWORK POINTS 1: REMOTE SLAVE MODULES
2: REMOTE EXTERNAL LED MIMIC MODULES
SELECT NO.
AC: 2S ALM: 000 PALM: 000 FLT: 000 DIS: 000