Specifications

Page 61

FIREFINDER SERIES II INSTALLATION, COMMISSIONING &

OPERATION

10 Main Functions

Figure 68: The Level II & III Functions Menu

10.1 Setting the Function Date Facility

Select FUNCTION. A prompt will ask for a PASSWORD if the control panel is not currently active.

Using the keypad key in the Level 2 or 3 PASSWORD and press ENTER.

Press

 To select the set DATE SCREEN. The prompt will ask for the date to be entered in this format,

DD/MM/YYYY (EG 01/01/2011 ), key in and press ENTER. The screen will then return to the MAIN

FUNCTIONS MENU.

10.2 Setting the Function Time Facility

Press

 Then in the following format key in the time, HH:MM using the 24 hour mode. Press ENTER and

the screen will return to the MAIN FUNCTIONS MENU.

10.3 Setting the Function Daynight Facility

Press

 The DAY-NIGHT SETTINGS screen will appear. Time entry is the same as setting the “Time”

facility

Press

 To enter the DAY ON time then ENTER and,

 To enter the NIGHT ON time then ENTER.

 To ENABLE / DISABLE then ENTER.

For this Function to have control it must be ENABLED, press  Re-pressing  will toggle to

DISABLE.

10.4 Function Logs Facility

Press

 And the EVENT LOG MENU will be displayed.

The LOGS MENU allows the operator to select and view the events that have occurred of all;

Press:  ALARM,  FAULT,  DISABLE

Once the type of log is selected, e.g. FAULT above, each entry can be viewed by stepping through

them using the

and

keys

LEVEL III MAIN FUNCTIONS

0: DATE 1: TIME 2: DAY/NIGHT 3: LOGS

4: TESTS 5: I/O 5: PASSWORD 6: PROG

SELECT NO.

AC: 3S ALM: 000 PALM: 000 FLT: 000 DIS: 000