Specifications

Page 63
FIREFINDER SERIES II INSTALLATION, COMMISSIONING &
OPERATION
10.6 Function Manual I/O Control
Press  To display the Manual I/O Control menu
Figure 69: The Manual I/O Control Menu
Manual I/O control allows the technician to turn ON or OFF inputs and outputs off a device to
facilitate testing or isolation of plant during maintenance. Removal of manual control returns control
to the panel.
Press  Input Selected:
Press
 IN A PANEL: Enter the I/O Controller number then the input number. This will display the
description for the input and its current state, you can then turn the input ON or OFF or remove
manual control.
 ON A LOOP: Enter the loop number, the sensor number and the input number. This will
display the description for the input and its current state, you can then turn the input ON or OFF or
remove manual control.
 Remove All Manual Input Control: Will remove all manual input control.
 Output Selected: Same sequences as above for inputs but substitute outputs for inputs.
 Remove All Manual Control Selected: Globally removes all manual control.
MANUAL I/O CONTROL
0: INPUT 1 :OUTPUT
2: REMOVE ALL MANUAL CONTROL
SELECT NO.
AC: 3S ALM: 000 PALM: 000 FLT: 000 DIS: 000