Specifications

Page 64
FIREFINDER SERIES II INSTALLATION, COMMISSIONING &
OPERATION
10.7 Function Access (Level II) / Passwords (Level III)
Press  While in the Main Functions menu and enter the Level III Password if in Access Level II
or, if in Access Level III to display the Password Menu.
Figure 70: The Password Menu
 Add Password: Enter the new password, then press ENTER . The password is always a 4 digit
number.
 Delete Password: Enter the password that you want to delete, then press ENTER.
 Delete All Passwords: This asks you to confirm that you want to delete all the passwords.
Press ENTER then ENTER again.
 Zone / Sensor Mode: This sets the mode in which Alarms, Faults, Pre-Alarms and Disables
status information will be displayed. “Zone” is the default setting.
10.7.1 Forgotten Passwords
If you have forgotten your password,
 Enter 9999 into the password field;
 Take note of the 4 digit password button displayed on the screen;
 Contact the AMPAC head office and quote this number;
 A temporary password will be issued to allow access to the level 3 functions
 A new password can now be programmed.
Note: temporary password will become invalid if 9999 is entered again or if the panel is re-
powered.
10.8 Function Programming
Press  To display the Level III Programming Menu.
Figure 71: Programming Menu
ON SITE PROGRAMMING MENU
0: CONV ZONE 1 :DEVICE 2:INPUT 3: OUTPUT
4: PANEL BASED MCP
SELECT NO.
AC: 3S ALM: 000 PALM: 000 FLT: 000 DIS: 000
PASSWORD MENU
0: ADD PASSWORD 1 :DELETE PASSWORD
2: DELETE ALL PASSWORDS
SELECT NO.
AC: 4S ALM: 000 PALM: 000 FLT: 000 DIS: 000