Specifications

Page 68
FIREFINDER SERIES II INSTALLATION, COMMISSIONING &
OPERATION
10.8.8 Mismatch Detected
If a mismatch is detected the Normal Default Screen will change to that shown below. Go to the
Programming Menu and select either  Resolve Extra Modules and Devices then 
(Device Type) or  (Mode) to resolve the mismatch, OR On Site Programming to resolve manually.
Figure 79: Resolving a Mismatch
Loop 1 Sensor 1
L1 S6 Z1 STAT: TYPE MISMATCH
ZONE FAULTS 1 of 1