Specifications

FIREFINDER NZ CONFIGURATION MANAGER
3.4.1.5 Communications:
This tab will display a page to set the port and methodology used to communicate
with the FireFinder Series II. Normally;
Figure 7: Communication Dialogue Box
USB: A converter is required
Communications Port: Comms 1-8
Note: Available Ports can be found by using Device Manager within the Window operating
system
Default Communications Speed: The speed or baud rate of the communications port is configured
for 38,400 bps to talk to the FireFinder Series II™ and no adjustments are required by the user.
Default Phone Number: Enter the phone number to be auto dialled for modem connection
Use Modem Connection for Transfer Wizard: Tick if the Transfer Wizard is to be used as the
communication vehicle.
Use Modem Connection for Remote Control: Tick if remote control of the FACP is via the modem
Use Hardware Flow Control (RTS/CTS): Tick if hardware control is used from the transfer of data.