Specifications

FIREFINDER NZ CONFIGURATION MANAGER
4.6.3 Controller Setting or Editing
 The following screens have been compressed for the purposes of explanation
Edit Modules Apollo and Conventional: To physically edit each parameter left click in the
appropriate square and enter or change the existing setting / information.
 Both drop down screens are shown displayed, this is for explanation purposes only.
Figure 29: Controller Settings - Apollo Loop Module
Figure 30: Controller Settings - Conventional Module
Edit Module Input / Output: Here the Input and Output descriptions can be edited and the Inputs
and Outputs can be made active / inactive. To physically edit the description click in the box and edit
from the keyboard in the normal way. To set an Input or Output to active / inactive double click on
the “Y” [Yes] active or “N” [No] inactive.
Figure 31: Controller Setting - Input / Output Module