Specifications

FIREFINDER NZ CONFIGURATION MANAGER
4.6.9 Edit SmartTerminal
Click on the “Tab” SmartTerminal and the Edit screen will be displayed.
To set the SmartTerminal parameters click on the SmartTerminal tab and the following screen will
be displayed. Under the assigned SmartTerminal Card designator, 1 to 30, click in the Active box to
change the “N” (NO not fitted) to “Y” (YES fitted) and then enter or type in a “Description”. The
description should be a name given to the SmartTerminal (LCDA) or its physical location. Double
click in each of the “Report” boxes to display and set the, “Y” (Yes reports the parameter) and “N”
(No does not report the parameter) “Alarms, Faults, Disables” parameters that SmartTerminal will
display on each SmartTerminal at each location.
Note: A maximum of 30 SmartTerminal’s can be used in the configuration of the FACP.
Note: NFS Group, NFS Ack Timeout (second) NFS Inv Timeout (second) are not used under
the NZ4512 standard.