Specifications

FIREFINDER NZ CONFIGURATION MANAGER
4.6.10 Single Panels
If the system consists of a single panel and a single Controller then commence the configuration by
right clicking on the (C1) Controller and selecting Edit Module Types or double left click on the
Controller. This will display the screen as shown below
Figure 46: Controller Configuration Screen
Note: Click on the check boxes (ticked) External LED Mimic, Internal Serial, SmartTerminal,
Fan Control or Switch Indicator if they are to be incorporated into the configuration.
4.6.11 Modules
Description: A default descriptor is automatically entered when the Type is selected to make it
easier to identify. The user may alter this if required.
Available Module Type: The type of the module is selected here from a drop-down list box or by
using the Graphic screen where click and drag to the module is used. The modules available are the:
 Conventional Module
 Input/Output Module
 Apollo XP95 Module
Ref No: The reference number represents whether the module is the first, second, third etc of its
type. For example if two Apollo modules are fitted the first module would have a ref. No. 1 and the
second module would have the number ref No. 2. If a Conventional Module were the next module
then its reference number would be 1 as it is the first module of that type. These numbers are
unique over the whole system; they are generated automatically and should not need to be altered.
For advance users the numbering does not have to be continuous and can be altered to suit specific
applications.