Specifications

FIREFINDER NZ CONFIGURATION MANAGER
5 The Module Data Entry Spreadsheet
Once all the Module data for the panel has been entered, the next step is the entry of specific data
for each module. This is done via the Module Data Entry Spreadsheet. To access the Spreadsheet
double click on the Controller (C1)
 Note: If the Controller Configuration Information has not been entered the Controller
Configuration Dialogue Box will appear rather than the spreadsheet shown below.
The Module Data entry Spreadsheet appears as a window with a row of tabs along the top, one for
each module. To enter the data for a module, click on the tab and in the area below a spreadsheet
will appear in which you enter the data.
Figure 47: Apollo Module Data Entry Spreadsheet
5.1 Type and Zone Configuration (Zone Cnfg)
 Note: These screens below have been expanded to show the entire Menu for demonstration
purposes. This action is not possible in the actual process and the scroll buttons will have to be used
to view the entire selection.
To select the “Type” of module or device click on the item from the drop down menu or the in
the tool bar or right click in the box and use the “Select Device”.
Figure 48: Device Type
The appropriate “Zone Config” is then selected from the second drop down box.