Specifications

FIREFINDER NZ CONFIGURATION MANAGER
Figure 49: Zone Configuration (Zone Cnfg) Type
If a device is selected, such as I/O Modules, that requires programming or settings the “More”
column will indicate this by automatically inserting a in the column. Double clicking on the
will open another screen in which control data for that device can be entered. This is covered in
more detail later in the manual under Input / Output Settings
Figure 50: Short cut Window
This shortcut selection screen is selected by right clicking within a column within which a selection is
to be entered.
Select Device: categorises the types of devices that can be selected
Fill selection: is used to fill and number multiple sensors of the same type. This is done by entering
the first description or type etc then left clicking on it and dragging the
Cursor down to the last desired insertion point.
Cut, Copy, Paste and Delete: are used to edit either single or multiple entries in the normal way.