Specifications

FIREFINDER NZ CONFIGURATION MANAGER
7.2 Adding a Data Gathering Point
To add a Data Gathering Point to the system left click on the DGP icon as shown so that is
highlighted. Then left click on the mimic and the DGP will be added.
Figure 65: Adding a Data Gathering Point (DGP) Screen
Once added, double click on the DGP to open the screen shown below. Here the description and the
node numbering (Reference) of the DGP can be edited. In practice it is best to rely on the auto-
numbering of “Reference”.
Figure 66: Adding a Data Gathering Point (DGP) Screen
C1 – the Controller parameters are then set in the same way as the others.