Specifications

FIREFINDER NZ CONFIGURATION MANAGER
3.2 Connect
3.2.1 Connect to FireFinder Series II
This will bring up a terminal window showing communications to and from the FireFinder Series II.
Refer to the programming section at the end of this manual for more information.
3.3 Tools
3.3.1 Verify Project (F4)
The verify function will verify there are no errors or omissions in the project.
3.3.2 Compile File (F5)
The compile file must be done every time that a modified file is to be downloaded to the FireFinder
Series II panel. This ensures that the data format is correct as per the required structures.
3.3.3 Convert File from FireFinder Series II System
This will convert the information previously uploaded from the FireFinder Series II FACP into a
format such that it can be imported for use by Config Manager. (*.fcc)
3.3.4 Clean Up Directory
The clean up directory function will automatically erase unnecessary files that have been created
during the compile process.
3.4 Options
3.4.1 Environment Settings
Clicking on this option will display the Environment Settings Options Dialogue Box as seen below.
Figure 2: The Environment Settings Options Dialogue Box
From this dialogue box the following features to be set are: