User manual

Page 32
LOOPSENSE EN54 USER MANUAL
SELECT DEVICE TYPE: <device type>
CHANGE▼
◄BACK NEXT►
7.6.2.1 Menu->Programming->Device->Add
In this wizard the user can scroll through the desired device type to be added. The user is also
prompted to save changes if required.
7.6.2.2 Menu->Programming->Device->Delete
Zzzz Ppp Lll Dddd.s <device type>
◄BACK DELETE►
Once selected the device location and type shall be displayed:
The user shall then be prompted to save changes if required.
7.6.2.3 Menu->Programming->Device->Edit
SELECT DEVICE TYPE: <device type>
CHANGE▼
◄BACK NEXT►
Once the device is selected firstly the device type can be changed:
If the device type is changed the following confirmation screen is presented:
WARNING: SETTINGS WILL BE DEFAULT
EXCEPT ZONE NUMBER AND DESCRIPTOR
PROCEED WITH CHANGE
◄BACK 1:YES
Confirming this will change the device type. As each device type has a different set of configurable
attributes only the device descriptor and zone number are common hence all other configurable
attributes for the given device are set to their default value when the device type is changed.
EDIT DESCRIPTOR
<descriptor>_
#CLEAR DEL ▲
◄BACK NEXT►
Edit the descriptor using the alphanumeric keys. Press NEXT► to go to the next field.
ENTER ZONE NUMBER: X
#CLEAR DEL ▲
◄BACK NEXT►
The zone number may then be changed:
EDIT ACTION TYPE: FIRE
CHANGE▼
◄BACK NEXT►
Press CHANGE▼ to browse through the available action types. Press NEXT► to go to the next
field.
INPUT TYPE: NON-LATCHING
CHANGE▼
◄BACK NEXT►