GSM/GPRS/GPS/LBS M5-Tracker User Manual
EN Preface Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.
EN Contents 1. 2. 3. 4. 5. Summary ............................................................................................................ 5 Applications ........................................................................................................ 5 Hardware Description ........................................................................................ 6 Specifications ..................................................................................................... 7 Usage ........
EN 6. 7. 5.24 Movement alarm ...................................................................................... 18 5.25 Over speed alarm .................................................................................... 19 5.26 Low battery alert ...................................................................................... 19 5.27.GPS blind Spot alert ................................................................................ 19 5.28 Sleep Mode ..........................................
EN 1. Summary Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or internet. 2. Applications for children, seniors and dependent family members, pets, horses and farm animals vehicles and sports equipment perfect travel companion for luggage, valuables, etc mobile alarm system for hotel rooms, cottages, tents, etc. AMPAROS Am Lindbruch 107 41470 Neuss GERMANY Telefon: +49 (0) 2137.7960487 Telefax: +49 (0) 2137.
EN 3. Hardware Description 3.1 Side 3.2 Front Speaker GSM,GPS, Power indicator USB Port Call contact SOS Button MIC JIAN 3.
EN 4. Specifications Content Dim. Weight Network Band GPS sensitivity GPS accuracy Specifications 8.6×4.6×1.8cm 60g GSM/GPRS 850/900/1800/1900Mhz -159dBm 5m Time To First Fix Cold status 45s Warm status 35s Hot status 1s Charging Voltage Charging Voltage Battery Standby Storage Temp. Operation Temp. EN 55022:2010 EN 61000-3-2:2006 A1:2009+A2:2009 EN 61000-3-3:2008 EN 55024:2010 110-220V input 5V output Chargeable changeable 3.
EN 5. Usage 5.1 SIM Card Installation 5.1.1 Make sure that there is no call transfer and call display is on, and PIN code off. The SMS message must in Text format, can’t be identified for PDU format. 5.1.2 Lift the soft plastic buckle of the SIM Card slot, the SIM card is placed correctly if heard the sound of lock, and then put the buckle back. The SIM will automatically pop up if press it gently. 5.2 Battery and charger Do charge the battery to capacity in 8 -12 hours for first time.
EN 5.3.5 Status indicator: The green indicator keep flashing 1 time every second after acquire GSM signal; and every 3 seconds under GPRS state. The red indicator keeps on when charging and turn off after fully charged. It is off if voltage of battery is normal. The blue indicator keep flashing 1 time every second after acquire GPS signal. 5.4 Initialization Send “begin+password” in SMS to the unit, it will reply “begin ok” and initialize all the settings.
EN 5.6.1 Call the tracker for 10 times continuously and get position correctly, then it will make the cell phone number as the authorized number automatically. 5.6.2 Send SMS:“admin+password+space+cell phone number” to set up a authorized number. The other authorized numbers should be set by the first authorized number. If the number is successfully authorized, the unit will reply “admin ok!” in SMS. 5.6.3 Send SMS:“noadmin+password+space+authorized number” to delete the authorized number. 5.6.
EN 5.8 The function of buttons button function SOS description Press 3 seconds to send SOS message to the authorized number and call circularly. Hang up Answer Short press SOS under call state.
EN 5.9.2 When an authorized number dials up the unit, it will hang up and report a real-time Geo-info as below: *Tracking location, when no GPS signal, the SMS includes the last valid latitude & longitude as well as the LAC code of current position, the LAC code can be input in the column of “manual track” menu of web platform. 5.10 Auto track continuously 5.10.
EN 5.10.3.2 Set this function on web server: Set time interval first and then distance interval, tracker will locate upon the time and distance. 5.10.4 Cancel: Send SMS “nofix+password” to the tracker device to cancel the “auto track”. 5.11.
EN 5.13 GPS drift suppression 5.13.1 This function is activated as default,activate this function by Sending "suppress+password" to tracker, it will reply" suppress drift ok". The GPS data stop updating if vehicle is not moving and latitude and longitude always keep same, and GPS data updates automatically when vehicle is moving. 5.13.2 Cancel this function by sending "nosuppress+password" to tracker, it will reply" nosuppress ok ". 5.
EN 5.18 Data logging 5.18.1 Auto logging:When the tracker device lost GSM signals or fall offline from GPRS, tracker will log the tracking position and alerts automatically in the SD card on the basis of the pre-set condition, when GSM signals get back, all the event alerts will be auto-sent to the authorized numbers or monitoring platform (server), but the logged tracking data should be loaded to the monitoring platform via SMS command. 5.18.
EN 5.20. SOS Alert Press the SOS for 3 seconds, it will send SMS “help me!+ Geo-info” to all the authorized numbers and dial all the authorized numbers in turn . It will stop alert when any authorized number answer the call or reply SMS “help me” to the tracker. Sound will close in the process, entry voice monitor mode after the authorized number answer the call. 5.21. Shock Sensor Alarm 5.21.1 Setup: Shock sensor alarm is deactivated in default settings.
EN 5.22. Geo-fence Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to the authorized numbers when it breaches the district. 5.22.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can Send SMS: “stockade+password+space+latitude,longitude; latitude,longitude” to unit to set the restricted district.
EN it will reply "rename ok!" for successful configuration. Example: Send "area123456 22.353648,113.543678 school,800M". it means the new area name is "school", and covers area of a radius of 800 meters. 5.23.4 Activate multi-area management Send SMS command "area+password+space+on" to tracker, it will reply "Area on ok!", when tracker enter the pre set area, it will send SMS "area name+latitude & longitude" to all the authorized phone number, and send same SMS when goes out of the area. 5.23.
EN 5.25 Over speed alarm 5.25.1 Set up: Send SMS “speed+password+space+080” to the unit (suppose the speed is 80km/h), and it will reply “speed OK!”. When the target moves exceeding 80km/h, the unit will send SMS “speed+080!+ latitude & longitude” to the authorized numbers at interval of 3 minutes. 5.25.2 Cancel: Send SMS “nospeed+password” to deactivate the overspeed alarm. Remark: The recommended speed should be not less than 30km/h.
EN 5.28 Sleep Mode 5.28.1 Sleep by time Send "sleep+password+space+time", tracker will reply "sleep time ok" if none of the alarms/alerts has been set and no operations in 5 minutes, tracker will fall asleep, GPS module shut off, and LED will be off too. Calling or SMS can awake the tracker. If alarms have been set, tracker will enter sleep by detecting shock sensor. 5.28.
EN 5.30 Charges Inquiry Function: Send SMS command "balance+password+space+phone number+space+content" to tracker , it will forward the content to the specified phone number and return the content from the specified phone number. Realization: When gps device receives balance command,it will extract the sim card number,"phone number" and "content" in the command;then forward the "content" to the "phone number " and forward the reply to the sim card number which sends the balance command. 5.
EN 5.33 Terminal (local) Time Setting Send SMS command “time+space+zone+password+space+time” to the tracker unit, If succeed, It will reply “time OK” For example: Send SMS “time zone123456 8”, 8 is Chinese time zone, If your country time zone is minus, send SMS “time zone123456 -8”. 5.34 TCP/UDP Switch Command: "gprs+password,0,0" TCP with keep alive data, this is the default mode.
EN 5.37.1 Setting up APN 5.37.1.1 APN standards for Access Point Name and differs from country to country. For more information about the local APN, inquire with your local GPRS network operator. 5.37.1.2 Text the tracker a SMS “APN+password + Space + your local APN” via a cell phone and if succeeded in setup, the tracker will return the message “APN OK”. 5.37.1.3 e.g. send SMS command “APN123456 internet.t-mobile”. If succeeded, “APN OK” is returned by the tracker in SMS.
EN 5. 37.3 IP and port setup 5.37.3.1 Send SMS as below via a cell phone: adminip +password + Space + IP Address + Space + Port Number. If succeeded, “adminip OK” is returned by the device in SMS. 5.37.3.2 e.g, Send SMS command “adminip123456 85.214.34.86 1167” to the tracker device, If succeeded, “adminip OK” is returned by the device in SMS.( 123456 is default password,85.214.34.86 is IP,1167 is port – AMPAROS tracking). Note: The IP and port information are on our website: www.AMPAROS.de 5.
EN 5.40 Setup monitor center number 5.40.1 Setup: send command “centernum+password+space+number” to tracker, it will reply“centernum ok”, for example, send centernum123456 13800138000 5.40.2 Cancel: Send “nocenternum+password”. Note: If monitor center number doesn’t setup, auto track messages will be sent to the cell phone which send this command. 5.41 Web platform and APP tracking 5.41.1 Web based platform www.gps.AMPAROS.de. 5.41.2 APP tracking is included in our service. 6.
EN 7. Faults & The solutions Faults Fail to turn on Solution Check the battery and see if it is charged. No GSM Signal Please make sure SIM Card is GSM Net and installed correctly, also call display should be on; but no call transfer and PIN code off. Check whether the normal power supply voltage. No GPS Signal A more open view of the sky is recommended to make sure the device can receive the GPS signal normally.