Owners manual

107
a) Reboot the ALLY Router first by powering it off and back on, then reboot the ALLY Extender.
Wait three minutes and then check the Wi-Fi network names are correct.
b) If option “a” does not work, move your ALLY Extender closer to the ALLY Router and try again.
c) If a through b do not work, try resetting the ALLY Extender by holding down the reset button on the
bottom of the ALLY Extender for 10 seconds to allow the Extender to reset, reboot and resync with
the ALLY Router.
I am only getting 3 or 4 wireless signal bars on my wireless computer and I am within 10 feet of the wireless
router.
a) Step back at least 10 feet from the ALLY Router and check your signal again. The ALLY Router emits
high power, long range Wi-Fi signals that may confuse your wireless adapter signal reading at close
range. The speed and signal are at 100%, however your readout may not be displaying the data
correctly.
b) Change the wireless channel on your ALLY Router to find a channel with less interference. Do this for
both 2.4GHz and 5.0GHz wireless networks. To assist in finding the right channel, download the Amped
Wireless Wi-Fi Analytics Tool for your Android or PC. Changing the Wi-Fi channels can be done via the
Web Menu and not the ALLY app.