Manualshelf

Owners manual

ManualsBrandsAmped Wireless ManualsComputers & LaptopsALLY Plus IEEE 802.11ac Ethernet Wireless Router - 2.40 GHz ISM Band - 5 GHz UNII Band - 4 x Antenna(4 x Internal
11121314151617181920
15
WEB MENU SETUP (ALTERNATIVE TO APP SETUP)
The ALLY is meant to be installed using the ALLY app. If you reached this section and have not begun setup
yet, please refer to the Basic Setup Guide on page 7. In the case that you do not have an Android 4.4+ or iOS
9+ device and still wish to use the ALLY without the ALLY app, follow the instructions below.
Note: We strongly recommend that you use the ALLY App to enjoy the overall experience of the ALLY system.
If you have already configured your ALLY using the app you will need to access your ALLY app to obtain the
access code to access the web menu.
a) Power on the ALLY Router and attach the included Ethernet cable to your modem and the other end
to the modem port of the router.
b) Connect your PC or tablet to the ALLY Wi-Fi network: Amped_ALLY_XXXX
c) Open your web browser.
d) Type http://setup.ampedwireless.com
into the web address bar.
e) If the web menu fails to open, type the following IP
address into your web address bar:
http://192.168.3.1