User`s guide

AP300
USER’S GUIDE
26
act as a DHCP Server. You may also manually control the IP settings of the Smart Access Point by choosing,
Client, Server or Disabled from the DHCP drop down menu. This is only for advanced users.
DHCP Client Range: The range of IP addresses the Smart Access Point’s DHCP server will assign to users and
devices connecting to the Smart Access Point.
Disabled / Static DHCP: If your network requires the use of manual IP address assignments, select this option.
You may manually enter the IP address settings of the Smart Access Point so it reflects the correct addresses to
work with your specific network. Note: In Static IP mode, the setup URL: http://setup.ampedwireless.com will
no longer work. You will need to manually enter the IP address of the Smart Access Point to access the setup
menu in the future.
Domain Name: The Domain Name allows you to change the URL which is used to access the Setup Menu for
the Smart Access Point. For example, entering http://setup.ampedwireless.com into your web browser while
connected to the Smart Access Point, will guide you to the Web menu for the Smart Access Point. By changing
the Domain Name, you will change the URL entered to access the Web menu. If you forget the Domain Name
you entered and can no longer access the Web menu, then you will need to reset your Smart Access Point to
default settings by holding down the reset button on the back panel for 5-10 seconds.