User’s Guide High Power Wireless-300N Smart Access Point AP300
AP300 USER’S GUIDE CONTENTS INTRODUCTION .................................................. 2 GETTING STARTED .............................................. 3 Wireless Settings: Wi-Fi Protected Setup (WPS) ........... 19 Wireless Settings: Advanced Settings ........................... 20 Package Contents ........................................................... 3 LED Indicators ................................................................. 4 Back Panel Description ..................................
AP300 USER’S GUIDE INTRODUCTION Thank you for purchasing this Amped Wireless product. At Amped Wireless we strive to provide you with the highest quality products through innovation and advanced technology. We pride ourselves on delivering products that outperform the competition and go beyond your expectations. If you have any questions please feel free to contact us. We’d love to hear from you and thank you for your support! Email: sales@ampedwireless.com Call: 888-573-8830 Web: www.ampedwireless.
AP300 USER’S GUIDE GETTING STARTED Package Contents Check to make sure you have all the contents within your package: High Power Wireless-300N Smart Access Point Ethernet Cable Power Supply Access Point Stand CD with Users Guide Two High Gain 3dBi Antennas Setup Guide 3
AP300 USER’S GUIDE LED Indicators Power: When lit, the power is on. Wireless Activity: Blinks rapidly when wireless data traffic is passing through the Access Point. Wired Connections: Shows the connection status and data activity of each wired LAN port. Network Connection: Shows the connection status between the Access Point and your router/network. WPS: Wi-Fi Protected Setup activity. When the WPS mode is activated the WPS LED blinks as it awaits a connection.
AP300 USER’S GUIDE Back Panel Description Antenna Connectors: RJ-SMA antenna connectors. Compatible with all antennas with RP-SMA connectors. Upgradable to high gain antennas for more range. Reset: Push down once to reboot the Smart Access Point. Hold down for 5-10 seconds to reset the device back to factory settings. WPS: Hold down for 3 seconds to enable WPS push button configuration. Network Port (5): RJ-45 port used to connect the Access Point to your router’s LAN port or any available network port.
AP300 USER’S GUIDE Wired Devices Ports (1-4): RJ-45 ports for connecting to wired computers or network devices. Supports up to 4 wired connections. Additional switches may be attached to these ports for additional LAN ports if needed. Power: Power adapter port. DC 12V 1A.
AP300 USER’S GUIDE PLUG AND PLAY SETUP GUIDE Connect the Smart Access Point to your Router a) Attach the Antennas b) Plug in the Power Adapter c) Connect the Smart Access Point to your Router’s network port (or any available port on a network switch) 7
AP300 USER’S GUIDE Connect your PC to the Smart Access Point Connecting Wirelessly: With your PC or Mac, scan for available wireless networks and locate the wireless network for the Smart Access Point: By default the Smart Access Point will have a SSID with the name: “Amped_AP” The default WPA security key is: “wireless” Wired Connections: Attach any wired devices to the Smart Access Point using Ethernet cables. Your Plug and Play setup is now complete.
AP300 USER’S GUIDE ADDITIONAL SETTINGS Accessing the Settings Menu To access the settings menu for additional changes to the configuration of your Smart Access Point, you will need to access the settings menu. The settings menu will allow you to change all features and settings for the Smart Access Point.
AP300 USER’S GUIDE Open your Web Browser a. b. c. Open your web browser Type in: http://setup.ampedwireless.com into the web address bar If the web menu fails to open type in the following IP address into your web address bar: http://192.168.1.
AP300 USER’S GUIDE Welcome to the Smart Setup Wizard When the web menu appears, click Next to continue to the next page.
AP300 USER’S GUIDE Set the System Clock The System Clock is used for system logs and setting schedules for Internet access. Click Sync to synchronize the System Clock with the time on your computer.
AP300 USER’S GUIDE Wireless Network ID The ID of your Wireless Network is: Amped_AP To change it, enter a new name in the SSID field. Users connecting wirelessly to the Smart Access Point will use this ID to identify your wireless network. Click Next to continue.
AP300 USER’S GUIDE Wireless Network Security The default Security Key (WPA) of your wireless network is: wireless To change it, enter a new key in the Security Key field. The key must be at least 8 characters long. Click Next to apply your settings. The Smart Access Point will reboot. This process may take up to 2 minutes. Do not refresh the web page. The page will automatically reload with the connection status.
AP300 USER’S GUIDE Setup Summary The Setup Summary provides you with information regarding your current settings. If you have wired network devices, you may attach them to the wired ports on the back of the Smart Access Point for additional wired connectivity. For information on additional settings and configurations for your Smart Access Point, continue to the next section.
AP300 USER’S GUIDE WIRELESS SETTINGS Wireless Settings: Basic Settings The Wireless Basic Settings page allows you to adjust settings for your wireless network. These settings are for adjusting the Smart Access Point after you have already gone through the Smart Setup Wizard and wish to adjust your current configurations. Disable Wireless LAN Interface: Turns off all wireless access. Band: Allows you to setup access under a specific combination of Wi-Fi speed standards.
AP300 USER’S GUIDE Data Rate: Adjust the speed of your wireless network. It is recommended that you use Auto for this selection. SSID of Wireless network: This is the name of your Wireless network and the name that users will scan for to connect wirelessly. Multiple SSID: You may add one additional (SSID) to you Wireless network. The additional SSID can have its own security, band and data rate settings.
AP300 USER’S GUIDE Wireless Settings: Security Wireless security allows you to change the security type, password/key and format of your wireless network security settings. Note: The security key you select must be used by all computers and devices connecting to the Smart Access Point wirelessly. Using the drop down menu, you can select which network you wish to configure and adjust the security settings for (standard wireless network or the multiple SSID network).
AP300 USER’S GUIDE Wireless Settings: Wi-Fi Protected Setup (WPS) WPS is a Wi-Fi feature created to make Wi-Fi setup simpler and easier. Some wireless devices and adapters support this feature with varying names (i.e. one touch setup or WPS). You may enable WPS setup here by selecting the type of WPS setup you wish to use. The Smart Access Point supports all types of WPS setup: Push button: You may push the WPS button on the web menu or use the physical button on the back of the Smart Access Point.
AP300 USER’S GUIDE Wireless Settings: Advanced Settings It is recommended that only experts in Wi-Fi configuration adjust the advanced wireless settings for the Smart Access Point. These settings allow you to control the details of your wireless network configuration.
AP300 USER’S GUIDE SMART FEATURES The Smart Access Point provides your wireless network with Smart Features that help to provide convenience and protection for your wireless network. The Smart Features allow you to control access to your wireless network through on/off schedules, specific user authorizations as well as through the size of your wireless coverage for your wireless network. These settings only apply to users connecting through the Smart Access Point to your network.
AP300 USER’S GUIDE Wireless Settings: Access Schedule You can set a schedule for when your Wi-Fi is enabled or disabled through the Access Schedule feature. To do so: a. b. c. d. Enable Access Schedule Select which days you wish for your Wi-Fi to be available Select the time frame during that day that you wish for Wi-Fi to be available Apply Changes Note: Make sure you have already configured your Time Zone Settings in order for your schedule to work correctly.
AP300 USER’S GUIDE User Access Control: User Access allows you to deny access or allow access to specific users connecting wirelessly to your wireless network. Each networking device has a unique address called a MAC address (a 12 digit hex number). By inputting the MAC address into the field, you can define whether that device is allowed into your network or not allowed. When entering the MAC address, only enter alpha-numerical characters (i.e.
AP300 USER’S GUIDE Wireless Coverage Controls: Adjust the output power of the Smart Access Point to control the coverage distance of your wireless network. For a smaller coverage area you can select a lower output power. For the maximum wireless coverage select the 100% selection. Note that if you select a lower output power, your connection to your Home Network will also decrease in range. So be careful and test your signal strength after each adjustment.
AP300 USER’S GUIDE IP SETTINGS IP Address: The IP address of the Smart Access Point Subnet Mask: The subnet of the Smart Access Point Default Gateway: The access point to another network, normally the Smart Access Point or your router. DHCP: The Smart Access Point includes a ‘Smart’ AUTO DHCP feature to help manage the IP addresses within your wireless network and with your router.
AP300 USER’S GUIDE act as a DHCP Server. You may also manually control the IP settings of the Smart Access Point by choosing, Client, Server or Disabled from the DHCP drop down menu. This is only for advanced users. DHCP Client Range: The range of IP addresses the Smart Access Point’s DHCP server will assign to users and devices connecting to the Smart Access Point. Disabled / Static DHCP: If your network requires the use of manual IP address assignments, select this option.
AP300 USER’S GUIDE MANAGEMENT FEATURES The Management features on the Smart Access Point allow you to view the status of your Smart Access Point and your wireless network. System Status The Smart Access Point System Status page provides full information regarding the system, wireless network and configurations as well as the current IP settings of the Smart Access Point. This page is often used to check the health of your wireless network and the link to your home router/network.
AP300 USER’S GUIDE Management: System Clock Maintain the internal clock for the Smart Access Point by syncing with your computer’s time. Your system clock settings need to be accurate in order for system logs and wireless access schedules to work correctly.
AP300 USER’S GUIDE Management: Upgrade Firmware The Wireless Smart Access Point uses internet software (firmware) to operate. In the event that a new firmware file is available you may update it here. During the upgrade process DO NOT power off the device to avoid damage to the Wireless Smart Access Point. To check for new firmware click the Check button. If a new firmware is available you will be given the option to install. To manually upgrade your firmware: a. b. c.
AP300 USER’S GUIDE Management: Save and Reload Settings Saving your current settings allows you to back-up your current settings which may be reloaded at a later time. This feature may be useful for testing new features and settings without having to worry about returning to a stable platform. To save current settings: a. b. Click Save Select a file name and location To load previously saved settings: a. b. c.
AP300 USER’S GUIDE You may also reset the Smart Access Point’s settings to factory settings by pressing Reset. By resetting the Smart Access Point you will lose all previous configurations and will need to run the Smart Setup Wizard again to reconnect to a Home Network. Management: Password Settings By default, the Smart Access Point does not require a password to log in to the web menu.
AP300 USER’S GUIDE USING POWER OVER ETHERNET (PoE) The Smart Access Point supports the use of Power over Ethernet. With a single Smart Access Point powered by a standard power outlet, you may connect additional PoE ready Amped Wireless devices using PoE capable Ethernet cables, without the use of additional power adapters.
AP300 USER’S GUIDE When installing multiple Smart Access Points using PoE follow the guidelines below for proper setup: 1) Pre-Configure your Smart Access Points before setup: Configure the wireless network names, security settings and channel numbers of each Smart Access Point before beginning your installation. This will make it easy to identify each wireless network as they are installed.
AP300 USER’S GUIDE TECHNICAL SPECIFICATIONS Wireless Standard: 802.11n, 802.11b/g Frequency Band: 2.
AP300 USER’S GUIDE DEFAULT SETTINGS The default settings for your Smart Access Point are listed here. If for some reason you need to return your Smart Access Point back to default settings, hold down the Reset button on the back panel for 10 seconds. The Smart Access Point will reset back to factory settings as listed below: IP Address: 192.168.1.240 Web Menu Access: http://setup.ampedwireless.
AP300 USER’S GUIDE TROUBLESHOOTING AND SUPPORT INFORMATION We are here to help. If you have any issues with your Smart Access Point please contact us. To contact Amped Wireless’ Technical Support use one of the following methods: Phone: 888-573-8820 Email: techsupport@ampedwireless.com Web: www.ampedwireless.
AP300 USER’S GUIDE Troubleshooting The tips in this guide are listed in order of relevance. Try solution (a) before trying solution (b) etc… I entered setup.ampedwireless.com and it failed to open the Web Menu. a. b. c. d. e. f. g. Make sure your computer is connected to the Smart Access Point using the included Ethernet cable. Ensure that the power on the Smart Access Point is turned on. Disconnect your computer from ALL WIRELESS NETWORKS. Try to access the setup menu again.
AP300 USER’S GUIDE I do not have Internet access when connecting to the Smart Access Point a. b. c. Your router or original network may not have Internet access. First check to see if you are able to access the Internet by connecting directly with your router. If you cannot, there is a problem with your router that needs to be fixed first. If you are able to access the internet, continue with the following troubleshooting options below. Your router may be using Static IP assignments.
AP300 USER’S GUIDE My Smart Access Point was working fine previously but now I can no longer access the Internet through the Smart Access Point. a. b. The settings on your router’s network may have changed or you may have lost internet connection on your home router. Any changes to the DHCP settings of your home router may affect the internet connection of the Smart Access Point. Check the settings on your router and try again.
AP300 c. USER’S GUIDE Reset the Smart Access Point back to default settings and try the Smart Setup Wizard again. To reset the Access Point back to default settings, hold the Reset Button (on the back panel) down for five (5) to ten (10) seconds. After the Smart Access Point has fully reset, use an Ethernet cable and connect to the Smart Access Point. Log in to the Web Menu at http://setup.ampedwireless.com and reconfigure the settings for your Smart Access Point.
AP300 USER’S GUIDE The range from the Smart Access Point seems low a. b. c. d. Check to see that your wireless output settings are at 100%. Go to the Web Menu, Wireless Settings and check the Advanced Settings. Make sure the output power is at 100% Your Smart Access Point may be installed in a poor location. Avoid setting up your Smart Access Point in areas with high interference, such as, near fridges, microwaves, metallic objects and low surfaces.
AP300 USER’S GUIDE Tips on using Power over Ethernet with the AP300: a. Pre-Configure your Smart Access Points before setup: Configure the wireless network names, security settings and channel numbers of each Smart Access Point before beginning your installation. This will make it easy to identify each wireless network as they are installed. b.
AP300 USER’S GUIDE WARRANTY AND REGULATORY INFORMATION The Amped Wireless (A division of Newo Corporation, Inc.) Limited Warranty Warranty Period: The Amped Wireless Limited Warranty is for one (1) year from the date of purchase for new products. Refurbished products carry the Limited Warranty for thirty (30) days after the date of purchase.
AP300 USER’S GUIDE Limitations: IN NO EVENT SHALL AMPED WIRELESS’ (NEWO CORPORATION’S) LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, ACCESSORIES OR ITS DOCUMENTATION.
AP300 USER’S GUIDE warranty claims. You are responsible for properly packaging and shipping the product at your cost and risk to Amped Wireless. The bearer of cost related to shipping repaired or replaced product back to the purchaser will be at the sole discretion of Amped Wireless and determined based on the details of each RMA case. Customers outside of the United States of America are responsible for all shipping and handling costs including custom duties, taxes and all other related charges.
AP300 USER’S GUIDE Regulatory Information FCC Statement and Declaration: Amped Wireless declares that this device complies with Part 15 of the FCC Rules and Regulations. Operation of this device is subject to the following two (2) conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation.
AP300 - USER’S GUIDE Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution and Safety Notices: Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
tech support e-mail web 888-573-8820 techsupport@ampedwireless.com www.ampedwireless.com Amped Wireless A Division of Newo Corporation Copyright © 2011 Amped Wireless / Newo Corporation. All rights reserved. Amped Wireless, Newo Corporation, and the Amped Wireless Logo are registered trademarks or trademarks of Newo Corporation.
FCC ID: ZTT-AP300 FCC Compliance and Advisory Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC rules.
