User’s Guide RE1750A HIGHPOWER AC1750 WI-FI RANGE EXTENDER TM ®
RE1750A USER’S GUIDE CONTENTS INTRODUCTION .......................................................................... 2 GETTING STARTED ...................................................................... 3 Package Contents ............................................................................. 3 LED Indicators, Ports and Buttons .................................................... 4 Back Panel Description ..................................................................... 5 SETUP GUIDE ..........
RE1750A USER’S GUIDE INTRODUCTION Thank you for purchasing this Amped Wireless product. At Amped Wireless we strive to provide you with the highest quality products through innovation and advanced technology. We pride ourselves on delivering products that outperform and go beyond your expectations. If you have any questions please feel free to contact us. We’d love to hear from you and thank you for your support! Email: sales@ampedwireless.com Call: 888-573-8830 Web: www.ampedwireless.
RE1750A USER’S GUIDE GETTING STARTED Package Contents Check to make sure you have all the contents within your package: High Power AC1750 Wi-Fi Range Extender 3 x Detachable High Gain Antennas Power Adapter Setup Guide CD: User’s Guide, Installation Video, Setup Guide, Wi-Fi Analytics Android App 3
RE1750A USER’S GUIDE LED Indicators, Ports & Buttons Power: Indicates when the Range Extender is powered on. The LED will remain on. WPS: Blinks when Wi-Fi Protected Setup (WPS) is activated and the Range Extender awaits a connection. 5.0GHz Wireless Activity: Blinks rapidly when wireless data traffic is transmitted or received over the 5GHz wireless network. 2.4GHz Wireless Activity: Blinks rapidly when wireless data traffic is transmitted or received over the 2.4GHz wireless network.
RE1750A USER’S GUIDE Back Panel Description Antenna Connectors: RJ-SMA antenna connectors. Attach the included high gain antennas to these connectors. Reset: Push down once to reboot the Range Extender. Hold down for 5-10 seconds to reset the Range Extender back to factory settings. WPS: Hold down for 3 seconds to enable WPS push button configuration. Wired Ports: Gigabit RJ-45 ports for connecting to wired computers or network devices.
RE1750A USER’S GUIDE SETUP GUIDE Find a Setup Location The location of where you install the Range Extender is very important to how it will function. The optimal setup location should be somewhere no more than halfway between your Wi-Fi router and your Wi-Fi dead zone.
RE1750A USER’S GUIDE Attach the Antennas & Connect your PC or Tablet to the Range Extender a) Connect the included high gain antennas by screwing them into the antenna connectors. b) Plug the Range Extender into an available power outlet. c) Connect your PC or Tablet to the Range Extender’s Wi-Fi network: Amped_RE1750A_2.4 or Amped_RE1750A_5.
RE1750A USER’S GUIDE Open your Web Browser to Access the Web Menu a. b. c. a. b. c. Open your web browser. Type in: http://setup.ampedwireless.com into the web address bar. If the web menu fails to open, type in the following IP address into your web address bar: http://192.168.1.240 Disconnect your PC from all Wi-Fi networks. Attach an Ethernet cable between the PC and the Range Extender. Open your web browser and go to http://setup.ampedwireless.com again.
RE1750A USER’S GUIDE Welcome to the Dashboard The Dashboard will provide you with the current status of the Range Extender. Click SCAN to find an available network to extend. The diagram on this page displays the terms used to describe: 1) The network you are trying to extend (Home Network). 2) The network that is rebroadcasted and extended (Extended Network). Study this diagram carefully as the terms used in the following instructions will refer to these names.
RE1750A USER’S GUIDE Scan for a Wireless Network The Scan result will list all available 2.4GHz and 5.0GHz wireless networks detected by the Range Extender – including each network name (SSID), the operating channel, the type of security and the signal strength. If you are extending a dual band router, you will need to select the SSID of your 2.4GHz network and the SSID of your 5.0GHz network. The signal strength indicates the wireless connection between that network and the Range Extender.
RE1750A USER’S GUIDE Connecting to a Secure Network If the wireless network(s) you are trying to repeat has wireless security enabled, you will be prompted to enter a security key. If you are repeating a dual band router, you will need to enter the security key for both the 2.4GHz and 5.0GHz network. If either network does not have security, leave the field blank. After you have entered the security key(s), click Next to continue.
RE1750A USER’S GUIDE Extended Network Settings (SSID & Security) The default SSID of the Range Extender is “Amped_RE1750A_2.4” and “Amped_RE1750A_5.0”. If you choose to "Clone" the settings from your Home Network, the wizard will copy the SSID and security key of your Home Network. The SSID of the Extended Network will have a "_RE" at the end of its name. For example: Home_Network_RE. You can also manually enter a new network ID and security key. The new security key must be at least 8 characters long.
RE1750A USER’S GUIDE Connection Check DO NOT LEAVE OR REFRESH THIS PAGE. Allow the countdown to complete and the Wizard will automatically redirect you to the next step.
RE1750A USER’S GUIDE Connect to the new Extended Network During the countdown process, the Range Extender will reboot and disconnect the Wi-Fi connection. At this point, you will need to reconnect your PC or tablet to the new Extended Network. Follow the instructions on the screen to connect to the Extended Network. Once you have connected, click the check box to confirm. The Next button will appear allowing you to complete the setup process.
RE1750A USER’S GUIDE Setup Summary Congratulations, the Range Extender is now successfully configured. Your settings are now saved. Print the Setup Summary details and save it for future reference. If you have any wired devices that you would like to attach to the Range Extender, you may do so now. If you haven’t already positioned your Range Extender in an optimal location, you may do so. All Range Extender settings are saved and can be safely powered off for relocation.
RE1750A USER’S GUIDE Wired Port Routing The Setup Wizard automatically selects the Home Network (2.4GHz or 5.0GHz) your wired devices will be routed through to connect to the Internet. If you wish to change this setting you may do so from the web menu by accessing Network Settings > Wired Port Routing.
RE1750A USER’S GUIDE If the Home/Office Network connection fails try the following… The failed connection page will provide you with information on why the connection failed. Read the instructions carefully and retry your connection. The tips below will help to solve common issues: a. b. c. d. e. f. Check to make sure your Home Network security settings are correct. On the SCAN page, check that your Home Network is showing a signal of 70% or greater.
RE1750A USER’S GUIDE 5.0GHz WI-FI SETTINGS 5.0GHz Wi-Fi Settings: Home Network Settings (5.0GHz) The Home Network Settings (5.0GHz) page allows you to adjust settings for your 5.0GHz Home Network connection. These settings are for adjusting the Range Extender’s Home Network connection after you have already gone through the Setup Wizard and wish to adjust your current configurations. Home Network SSID (5.0GHz): Manually enter the Identification name of the existing 5.
RE1750A USER’S GUIDE 5.0GHz Wi-Fi Settings: Extended Network Settings (5.0GHz) The Extended Network Settings page allows you to adjust settings for your Extended Network. SSID of Extended Network: The name used to identify your Extended Network. This is the name that appears when a user scans for available Wi-Fi networks. Band: Allows you to setup access under a specific combination of Wi-Fi speed standards.
RE1750A USER’S GUIDE Guest Networks (5.0GHz) Click “Enable” to create a Guest Network. Guest Networks provide a separate wireless network, with unique settings for users to connect to. Band: Restrict the Wi-Fi protocol and speed used for the specific Guest Network. SSID: This is the name of your Guest Network. Data Rate: Restrict access to the Guest Network by setting a lower bandwidth by changing the data rate. Broadcast SSID: Disable to hide your SSID from public view.
RE1750A USER’S GUIDE 5.0GHz Wi-Fi Settings: Security (5.0GHz) Wireless security allows you to change the type of wireless security settings for your 5.0GHz Extended Network, Home Network or Guest Networks. Note: If you adjust the security of your Home Network and it is incorrect, the Range Extender will no longer have a successful connection to your Home Network. Using the drop down menu, you can select which network you wish to configure and may adjust the security settings below.
RE1750A USER’S GUIDE 5.0GHz Wi-Fi Settings: Wi-Fi Protected Setup – WPS (5.0GHz) WPS is a Wi-Fi feature created to make Wi-Fi setup simple and easy. Some wireless routers and adapters support this feature with varying names (i.e. one touch setup or WPS). You may enable WPS setup here by selecting the type of WPS setup you wish to use.
RE1750A USER’S GUIDE 5.0GHz Wi-Fi Settings: User Access (5.0GHz) User Access allows you to deny access or allow access to specific users connecting to the network. Each networking device has a unique address called a MAC address (a 12 digit hex number). By inputting the MAC address into the field, you can define whether that device is allowed into your network or not allowed. A MAC Address may sometimes be referred to as a Physical Address.
RE1750A USER’S GUIDE 5.0GHz Wi-Fi Settings: Wireless Coverage Controls (5.0GHz) Adjust the output power of the Range Extender to control the coverage distance of your 5.0GHz Extended Wireless Network. For a smaller coverage area you can select a lower output power. For the maximum wireless coverage select the 100% selection. Note that if you select a lower output power, your connection to your 5.0GHz Home Network will also decrease in range.
RE1750A USER’S GUIDE 5.0GHz Wi-Fi Settings: Access Schedule (5.0GHz) Access Schedules will enable or disable your 5.0GHz wireless access at a set time based on your predefined schedule. This feature is often used for restricting access to all users (such as children, employees, guests) during specific times of the day for parental control or security reasons. a. b. c. d. Enable Access Schedule. Select which days you wish for your Wi-Fi to be available.
RE1750A USER’S GUIDE 5.0GHz Wi-Fi Settings: Advanced Settings (5.0GHz) Advanced Wireless Settings should only be adjusted by technically advanced users. It is not recommended that novice users adjust these settings to avoid degrading wireless performance.Here are a few definitions on some settings. Fragment Threshold: The Default and Recommended setting is at 2346, meaning the High Power Range Extender will never fragment any frames that it sends to wireless users.
RE1750A USER’S GUIDE Preamble Type: Defines the length of the Cyclic Redundancy Check for communication between the Range Extender and roaming wireless users. IAPP: Inter-Access Point Protocol STBC: Space Time Block Coding improves reception by coding the data stream in blocks.
RE1750A USER’S GUIDE 2.4GHz WI-FI SETTINGS 2.4GHz Wi-Fi Settings: Home Network Settings (2.4GHz) The Home Network Settings (2.4GHz) page allows you to adjust settings for your 2.4GHz Home Network connection. These settings are for adjusting the Range Extender’s Home Network connection after you have already gone through the Setup Wizard and wish to adjust your current configurations. Home Network SSID (2.4GHz): Manually enter the Identification name of the existing 2.
RE1750A USER’S GUIDE 2.4GHz Wi-Fi Settings: Extended Network Settings (2.4GHz) The Extended Network Settings page allows you to adjust settings for your Extended Network. SSID of Extended Network: The name used to identify your Extended Network. This is the name that appears when a user scans for available Wi-Fi networks. Band: Allows you to setup access under a specific combination of Wi-Fi speed standards.
RE1750A USER’S GUIDE Guest Networks (2.4GHz) Click “Enable” to create a Guest Network. Guest Networks provide a separate wireless network, with unique settings for users to connect to. Band: Restrict the Wi-Fi protocol and speed used for the specific Guest Network. SSID: This is the name of your Guest Network. Data Rate: Restrict access to the Guest Network by setting a lower bandwidth by changing the data rate. Broadcast SSID: Disable to hide your SSID from public view.
RE1750A USER’S GUIDE 2.4GHz Wi-Fi Settings: Security (2.4GHz) Wireless security allows you to change the type of wireless security settings for your 2.4GHz Extended Network, Home Network or Guest Networks. Note: If you adjust the security of your Home Network and it is incorrect, the Range Extender will no longer have a successful connection to your Home Network. Using the drop down menu, you can select which network you wish to configure and may adjust the security settings below.
RE1750A USER’S GUIDE 2.4GHz Wi-Fi Settings: Wi-Fi Protected Setup – WPS (2.4GHz) WPS is a Wi-Fi feature created to make Wi-Fi setup simple and easy. Some wireless routers and adapters support this feature with varying names (i.e. one touch setup or WPS). You may enable WPS setup here by selecting the type of WPS setup you wish to use.
RE1750A USER’S GUIDE 2.4GHz Wi-Fi Settings: User Access (2.4GHz) User Access allows you to deny access or allow access to specific users connecting to the network. Each networking device has a unique address called a MAC address (a 12 digit hex number). By inputting the MAC address into the field, you can define whether that device is allowed into your network or not allowed. A MAC Address may sometimes be referred to as a Physical Address.
RE1750A USER’S GUIDE 2.4GHz Wi-Fi Settings: Wireless Coverage Controls (2.4GHz) Adjust the output power of the Range Extender to control the coverage distance of your 2.4GHz Extended Wireless Network. For a smaller coverage area you can select a lower output power. For the maximum wireless coverage select the 100% selection. Note that if you select a lower output power, your connection to your 2.4GHz Home Network will also decrease in range.
RE1750A USER’S GUIDE 2.4GHz Wi-Fi Settings: Access Schedule (2.4GHz) Access Schedules will enable or disable your 2.4GHz wireless access at a set time based on your predefined schedule. This feature is often used for restricting access to all users (such as children, employees, guests) during specific times of the day for parental control or security reasons. a. b. c. d. Enable Access Schedule. Select which days you wish for your Wi-Fi to be available.
RE1750A USER’S GUIDE 2.4GHz Wi-Fi Settings: Advanced Settings (2.4GHz) Advanced Wireless Settings should only be adjusted by technically advanced users. It is not recommended that novice users adjust these settings to avoid degrading wireless performance.Here are a few definitions on some settings. Fragment Threshold: The Default and Recommended setting is at 2346, meaning the High Power Range Extender will never fragment any frames that it sends to wireless users.
RE1750A USER’S GUIDE Preamble Type: Defines the length of the Cyclic Redundancy Check for communication between the Range Extender and roaming wireless users. IAPP: Inter-Access Point Protocol STBC: Space Time Block Coding improves reception by coding the data stream in blocks.
RE1750A USER’S GUIDE BOOSTBAND™ TECHNOLOGY BoostBand Technology is a feature that increases the overall speed and performance of the Range Extender by streamlining dual band network traffic through a single Wi-Fi frequency band between the Router and Range Extender. Doing so optimizes network traffic through the fastest available frequency band. BoostBand Technology can only be enabled when the Range Extender is connected to a dual band connection.
RE1750A USER’S GUIDE NETWORK SETTINGS Network Settings: IP Settings IP Address: The IP address of the Range Extender. Subnet Mask: The subnet of the Range Extender. Default Gateway: The access point to another network, normally the Range Extender or your router. DHCP: The Range Extender includes a feature to help manage the IP addresses within your Extended network and with your Home Network automatically.
RE1750A USER’S GUIDE DHCP Client Range: The range of IP addresses the Range Extender’s DHCP server will assign to users and devices connecting to the Range Extender. Static DHCP: You may set a static IP address within your DHCP network. The Range Extender will track the device via its MAC address and assign it a pre-defined IP address each time the device logs into the network. Obtain IP settings from the Home router or manually enter your IP settings.
RE1750A USER’S GUIDE Network Settings: Wired Port Routing If the Range Extender is connected to a dual band router, the Range Extender will automatically route the traffic from the device connected to the Range Extender’s wired port through the 5.0GHz Home Network to access the web with the fastest speeds. If you choose, you may adjust this setting so that all wired traffic is routed through the 2.4GHz Home Network connection instead.
RE1750A USER’S GUIDE MANAGEMENT FEATURES The Management features on the Range Extender allow you to view the status of your Range Extender and adjust other settings such as your System Clock, Passwords, and Firmware Upgrades among other administrative functions.
RE1750A USER’S GUIDE Management: Device Status The System Status provides you with a snapshot of your Range Extender’s current connections and settings. System Information: This section provides you with information on the version and build time of your firmware. This is used to help our support department determine what firmware version your device is running. The Current Date / Time will display the current clock settings of the Range Extender.
RE1750A USER’S GUIDE Connection State: The Connection State will say "Connected" when there are no problems with the connection to your Home Network. If the Connection State shows "Waiting for Keys" then the WPA/WPA2 security key you entered is incorrect. If the Connection State shows "Scanning" the Range Extender may be too far away from your home/office router. The Signal Strength display can be updated by refreshing the page and is a good tool to use for finding the optimal installation location.
RE1750A USER’S GUIDE Management: Network Statistics These statistics show the data activity for each network connection. Connection to Home Network: This statistics shows the data activity for all upload and download data between the Home Network and the Range Extender. Extended Wireless Network: These statistics shows all data activity for all users connected wirelessly to the Range Extender.
RE1750A USER’S GUIDE Management: System Clock Maintain the internal clock for the Range Extender by syncing with your computer’s time. Your system clock settings need to be accurate in order for logs and wireless access schedules to work correctly.
RE1750A USER’S GUIDE Management: System Logs System Logs are useful for viewing the activity and history of the Range Extender. The System Logs are also used by Amped Wireless Elite Support Concierges to help troubleshoot your Range Extender when needed. It is recommended that you enable all logs in the event that troubleshooting is required. All log entries are deleted each time the Range Extender reboots or is powered off.
RE1750A USER’S GUIDE Management: Upgrade Firmware Amped Wireless continuously updates the firmware for all products in an effort to constantly improve our products and their user experiences. When connected to an active connection with Internet access, the Range Extender can automatically check for new firmware updates that are available by pressing Check Now. Follow the prompts to complete the upgrade process.
RE1750A USER’S GUIDE To manually upgrade your firmware: a. b. c. Download the file from www.ampedwireless.com/support and remember the location where you saved it. Firmware files may also be provided by Amped Wireless Elite Support Concierges. Click Choose File and locate the file. Click Upload to begin upgrading. Note: Firmware files normally have a .bin file extension.
RE1750A USER’S GUIDE Management: Save/Reload Settings Saving your current settings allows you to back-up your current settings which may be reloaded at a later time. This feature may be useful for testing new features and settings without having to worry about returning to a stable platform. To save current settings: a. b. Click Save Select a file name and location To load previously saved settings: a. b. c.
RE1750A USER’S GUIDE Management: Password Settings By default, the Range Extender does not require a password to log on to the web menu. If you wish to enable a password to protect unauthorized access to the web menu and Setup Wizard, you may enter one here.
RE1750A USER’S GUIDE TECHNICAL SPECIFICATIONS Wireless Standard: 802.11a/b/g/n/ac Frequency Band: 2.4GHz, 5.0GHz Wireless Speed: 2.4GHz: 450Mbps (Tx/Rx) 5.0GHz: 1300Mbps (Tx/Rx) Amplifier: 3 x 2.4GHz Amplifier 3 x 5.0GHz Amplifier 6 x Low Noise Amplifiers Wireless Security: WEP, WPA, WPA2, WPA Mixed, WPS User Access Control: MAC address filtering Wireless Access Scheduling: Specific day and time (2.4GHz or 5.0GHz Separately) Wireless Coverage Control: 15% - 100% Output Power (2.4GHz or 5.
RE1750A USER’S GUIDE DEFAULT SETTINGS The default settings for your Range Extender are listed here. If for some reason you need to return your Range Extender back to default settings, hold down the Reset button on the back panel for 10 seconds. The Range Extender will reset back to factory settings as listed below: IP Address: 192.168.1.240 Web Menu Access: http://setup.ampedwireless.com 2.4GHz Extended Network SSID: Amped_RE1750A_2.4 5.0GHz Extended Network SSID: Amped_RE1750A_5.
RE1750A USER’S GUIDE TROUBLESHOOTING & SUPPORT INFORMATION We are here to help. If you have any issues with your Range Extender, please contact us. To contact Amped Wireless Elite Support use one of the following methods: Phone: 888-573-8820 Email: techsupport@ampedwireless.com Web: www.ampedwireless.
RE1750A USER’S GUIDE Troubleshooting The tips in this guide are listed in order of relevance. Try solution (a) before trying solution (b), etc. Troubleshooting: Web Menu Access Issues I entered http://setup.ampedwireless.com and it failed to open the Web Menu. a. b. c. d. e. f. Make sure your computer is connected to the Range Extender’s Wi-Fi network: Amped_RE1750A_2.4 or Amped_RE1750A_5.0 Try to use a different web browser. We recommend the Google Chrome web browser.
RE1750A USER’S GUIDE I could NEVER log on to the Range Extender wirelessly. a. b. Check that your wireless adapter supports WPA2 or WPA wireless security. If it does not then you will need to change the wireless security on the Range Extender. Go to the Web Menu, select Wireless Settings and then Wireless Security. Select the Extended Network from the drop down menu and either disable security or downgrade the security to WEP. Try connecting again. The connection to the Home Network may be down.
RE1750A USER’S GUIDE (10) seconds then let go. After the Range Extender has fully reset, use an Ethernet cable and connect to the Range Extender. Login to the Web Menu at http://setup.ampedwireless.com and run through the Wizard.
RE1750A USER’S GUIDE Troubleshooting: Home Network Connection Issues I cannot connect to my Home Network. I received an error when running the Setup Wizard. a. b. c. d. e. Your Home Network may be secured. Double check that you have the correct security key to connect to the Home Network. Your Range Extender may be located too far from your Home Network. Run through the Setup Wizard again. On the SCAN page, your Home Network should show a signal strength of 70% or greater.
RE1750A USER’S GUIDE I cannot find my Home Network when scanning for wireless networks in the Setup Wizard. a. b. c. The Range Extender may be out of range. Move the Range Extender closer towards the wireless router and try the Setup Wizard again from the Web Menu. It is recommended that your Home Network shows a signal strength of 70% or greater in the Setup Wizard SCAN results.
RE1750A USER’S GUIDE b. c. d. e. f. The connection to your Home Network may have been dropped or the router settings may have changed. Changes to the router could be a result of several events, such as a power outage. When this occurs, connect to the Range Extender and access the setup menu using the web address: http://setup.ampedwireless.com. Run the Setup Wizard to reconnect the Range Extender to your network.
RE1750A USER’S GUIDE g. h. If you cannot access the setup menu, check to see that your Range Extender is still on. Reboot the Range Extender by unplugging the power adapter and plugging it back in. Check to see if your connection has been reestablished by viewing a website. If you do not have a connection, log on to http://setup.ampedwireless.com and configure a new Home Network connection. Check to see that your home wireless router is still on. If it has been turned off please turn it back on.
RE1750A USER’S GUIDE I cannot find any wireless networks (Home Networks) to repeat. a. b. c. d. The Range Extender may be out of range. Move the Range Extender closer towards the wireless router and try the Setup Wizard again from the Web Menu. The antennas on your Range Extender may be loose. Tighten the antenna connections and try again. Check that the antennas are connected securely to the antenna connectors. The wireless Home Network may not be a compatible wireless network (802.11a/b/g/n/ac).
RE1750A USER’S GUIDE I can no longer connect to the Range Extender wirelessly. a. b. Power on and off the Range Extender and try again. The connection to the Home Network may be down. Use an Ethernet cable and connect directly to the Range Extender. Access http://setup.ampedwireless.com and run through the Setup Wizard again. After you have successfully reset the Home Network connection, try connecting wirelessly again. The connection to the Home Network seems slow.
RE1750A USER’S GUIDE e. To achieve 802.11ac Wi-Fi speeds for your extended network, it is necessary to extend an 802.11ac WiFi router. Check that your home router is an 802.11ac router. Extending a router with slower Wi-Fi speeds, such as 802.11b/g/n will result in slower Wi-Fi speeds for your extended network. Network devices connected to the wired ports of the Range Extender do not have Internet access. a. The Wired Port Routing on the Range Extender may not be defined correctly.
RE1750A USER’S GUIDE Troubleshooting: Wireless Issues I am only getting 3 or 4 wireless signal bars on my wireless computer and I am within 10 feet of the Range Extender. a. b. c. Step back at least 10 feet from the Range Extender and check your signal again. The Range Extender emits high power, long range Wi-Fi signals that may confuse your wireless adapter signal reading at close range. The speed and signal are at 100%, however your readout may not be displaying the data correctly.
RE1750A USER’S GUIDE c. d. e. f. g. h. Check the connections of the Antennas to the Range Extender. Tighten them if necessary. Adjust the Antennas of the Range Extender in different angles. The wireless channel that your network is using may be congested. Change the channel for your router’s 2.4GHz network or 5.0GHz network. The Range Extender should automatically reconnect to your networks new settings, however if it does not, simply reconfigure the Range Extender to your network.
RE1750A USER’S GUIDE Troubleshooting: Web Menu Feature Issues My Wireless Access Schedule is being erratic and not working at the correct times. a. You need to adjust your Time Zone Settings from the Management Web Menu page. Wi-Fi Protected Setup (WPS) is not working. Push button configuration does not detect the connection. a. The Range Extender supports WPS connections however some companies may use proprietary code for their own push button configurations.
RE1750A USER’S GUIDE WARRANTY AND REGULARTORY INFORMATION The Amped Wireless (A division of Newo Corporation, Inc.) Limited Warranty Warranty Period: The Amped Wireless Limited Warranty is for one (1) year from the date of purchase for new products. Refurbished products carry the Limited Warranty for thirty (30) days after the date of purchase.
RE1750A USER’S GUIDE Limitations: IN NO EVENT SHALL AMPED WIRELESS’ (NEWO CORPORATION’S) LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, ACCESSORIES OR ITS DOCUMENTATION.
RE1750A USER’S GUIDE discretion of Amped Wireless and determined based on the details of each RMA case. Customers outside of the United States of America are responsible for all shipping and handling costs including custom duties, taxes and all other related charges. Technical Support: The Amped Wireless Limited Warranty is not related to the terms, conditions and policies of Amped Wireless Elite Support offerings. For questions regarding support, please contact techsupport@ampedwireless.
RE1750A USER’S GUIDE Regulatory Information FCC Statement and Declaration: Amped Wireless declares that this device complies with Part 15 of the FCC Rules and Regulations. Operation of this device is subject to the following two (2) conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation.
RE1750A USER’S GUIDE - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution and Safety Notices: Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
RE1750A USER’S GUIDE FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
RE1750A USER’S GUIDE Industry Canada Statement: This Class B digital apparatus complies with RSS-210 and ICES-003 of the Industry Canada Rules. Operation of this device is subject to the following two (2) conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
RE1750A USER’S GUIDE Déclaration d’Industrie Canada : Cet appareil numérique de classe B est conforme aux réglementations RSS210 et ICES-003 d’Industrie Canada. Le fonctionnement de cet appareil est sujet aux deux conditions suivantes: (1) Cet appareil ne peut pas causer de brouillage préjudiciable (2) Cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant provoquer un dysfonctionnement.
RE1750A USER’S GUIDE LEGAL NOTICES & DISCLAIMERS Copyright Information and Trademark Usage Guidelines © 2015 Amped Wireless / Newo Corporation. All rights reserved. Amped Wireless, Newo Corporation, and the Amped Wireless logo are registered trademarks or trademarks of Newo Corporation. All non-Amped Wireless trademarks, logos, brands and products are trademarks or registered trademarks of their respective owners. Amped Wireless does not claim any relation.
RE1750A USER’S GUIDE distribution, modification, publication and transmission of any content of this product for public or commercial purposes is strictly prohibited. The Amped Wireless logo requires permission for use. For use of the Amped Wireless logo, please email legal@ampedwireless.com. Use of Amped Wireless' trademarks requires the use of the proper trademark symbol in all usage cases.
RE1750A USER’S GUIDE damage to data arising out of the use or inability to use any Amped Wireless product, damages resulting from use of or reliance on information present, even with prior notice to Amped Wireless. All non-Amped Wireless trademarks, logos, brands and products are trademarks or registered trademarks of their respective owners. Amped Wireless does not claim any relation.
RE1750A USER’S GUIDE Software Licenses / Disclaimers This product contains Software (including firmware), licensed to you, the purchaser, by Amped Wireless. This also includes Software downloaded from an authorized website, such as www.ampedwireless.com or from an authorized application market such as Google Play or Apple’s App Store. This license allows you to operate the Software in the manner described in the user’s manual for the purchased product.
RE1750A USER’S GUIDE IT IS YOUR RESPONSIBILITY TO BACK UP YOUR SYSTEM INCLUDING, WITHOUT LIMITATION, ANY DATA THAT YOU MAY USE OR POSSESS IN CONNECTION WITH THE PRODUCT. ANY MATERIAL, INFORMATION OR DATA DOWNLOADED OR OTHERWISE OBTAINED IS ACCESSED AT YOUR OWN DISCRETION AND RISK, AND YOU WILL BE RESPONSIBLE FOR ANY DAMAGE TO YOUR COMPUTER SYSTEM OR PRODUCT, OR LOSS OF DATA THAT RESULTS FROM THE DOWNLOAD OF SUCH MATERIAL, INFORMATION OR DATA.
RE1750A USER’S GUIDE Dispute Resolution / Arbitration This section describes how you agree to resolve any disputes with Amped Wireless regarding these Terms of Use or your purchase of any product from Amped Wireless and your use of that product. You and Amped Wireless agree to the following resolution process.
RE1750A USER’S GUIDE It is important that you understand that the arbitrator’s decision will be binding and may be entered as a judgment in any court of competent jurisdiction. If the arbitrator rules against Amped Wireless, in addition to accepting whatever responsibility is ordered by the arbitrator, we will reimburse your reasonable attorneys' fees and costs. It's important to us that we address any issues you might have promptly.
RE1750A USER’S GUIDE As an exception to this arbitration agreement, Amped Wireless is happy to give you the right to pursue in small claims court any claim that is within that court's jurisdiction as long as you proceed only on an individual basis. We would hope that our customer service agents could resolve any disputes you have with us without resorting to arbitration. Before initiating any arbitration proceeding, you agree to first discuss the matter informally with Amped Wireless for at least 30 days.
tech support e-mail web 888-573-8820 techsupport@ampedwireless.com www.ampedwireless.com Amped Wireless A Division of Newo Corporation Copyright © 2015 Amped Wireless / Newo Corporation. All rights reserved. Amped Wireless, Newo Corporation, and the Amped Wireless Logo are registered trademarks or trademarks of Newo Corporation.
