User's Manual

Mac OS X

To access the drive from your Mac desktop:

Note: If the USB drive does not appear automatically under your Networked devices, you will need to Map your Network Drive

(Instructions below).

a. Open Finder

b. On the left hand menu, under Shared, click AMPED_USB

To Map the network drive:

a. Open Finder

b. From the menu on the top of the desktop, select Go

c. Select Connect To Server from the drop down menu

d. Enter the address of the network drive based on which port the USB drive is attached to:

smb://AMPED_USB/usb2 or smb://Range Extender’s LAN ip address/usb2

smb://AMPED_USB/usb3 or smb://Range Extender’s LAN ip address/usb3

Then click Connect

If the network drive does not appear on your Mac desktop, follow these steps:

a. Open Finder

b. Select Preferences from the drop down menu

c. Check show "Connected Servers"

d. The drive should now appear on your desktop