User's Manual

69
69
g. If you cannot access the setup menu, check to see that your Range Extender is still on. Reboot the Range
Extender by unplugging the power adapter and plugging it back in. Check to see if your connection has
been reestablished by viewing a website. If you do not have a connection, log on to
http://setup.ampedwireless.com and configure a new Home Network connection.
h. Check to see that your home wireless router is still on. If it has been turned off please turn it back on.
The Range Extender should automatically reconnect to your Home Network within 10 minutes.
I have a dual-band router and I cannot extend the network (or both networks).
a. The Range Extender will repeat the 2.4GHz signal and the 5GHz signal from your router simultaneously.
Both wireless networks must have a signal strength of 70% or greater with the Range Extender for a
reliable connection. Make sure that your dual band router is close enough to the Range Extender to
receive a strong signal.
b. Check to make sure that you have the correct security key for both the 2.4GHz and 5GHz network of
your dual band router. These keys may sometimes be different from each other.
c. Check that the antennas are connected securely to the antenna connectors.
d. Ensure that your dual band router does not have any security features enabled, such as MAC address
filtering. If it does, disable it and try again.