User’s Guide High Power Wireless-300N Smart Repeater SR300
SR300 USER’S GUIDE CONTENTS INTRODUCTION ........................................................... 2 GETTING STARTED ....................................................... 3 Package Contents ........................................................... 3 LED Indicators ................................................................. 4 Back Panel Description ................................................... 5 SETUP GUIDE ...............................................................
SR300 USER’S GUIDE INTRODUCTION Thank you for purchasing this Amped Wireless product. At Amped Wireless we strive to provide you with the highest quality products through innovation and advanced technology. We pride ourselves on delivering products that outperform the competition and go beyond your expectations. If you have any questions please feel free to contact us. We’d love to hear from you and thank you for your support! Email: sales@ampedwireless.com Call: 888-573-8830 Web: www.ampedwireless.
SR300 USER’S GUIDE GETTING STARTED Package Contents Check to make sure you have all the contents within your package: High Power Wireless Smart Repeater Ethernet Cable Power Supply Repeater Stand CD with Users Guide Two High Gain 3dBi Antennas Setup Guide 3
SR300 USER’S GUIDE LED Indicators WPS: Wi-Fi Protected Setup activity. When the WPS mode is activated the WPS LED blinks as it awaits a connection. Wired Connections: Shows the connection status and data activity of each wired LAN port. Wireless Activity: Blinks rapidly when wireless data traffic is passing through the Smart Repeater. When there is a problem with the Wi-Fi connection this LED will remain off or blink steadily. Power: When lit, the power is on.
SR300 USER’S GUIDE Back Panel Description Antenna Connectors: RJ-SMA antenna connectors. Compatible with all antennas with RP-SMA connectors. Upgradable to high gain antennas for more range. Reset: Push down once to reboot the Smart Repeater. Hold down for 5-10 seconds to reset the device back to factory settings. WPS: Hold down for 3 seconds to enable WPS push button configuration. Wired Connections: RJ-45 ports for connecting to wired computers or network devices. Supports up to 5 connections.
SR300 USER’S GUIDE SETUP GUIDE Find a Setup Location The location of where you install the Smart Repeater is very important to how it will function. The optimal setup location should be halfway between your wireless router and your wireless dead zone.
SR300 USER’S GUIDE Connect your PC to the Smart Repeater a. b. c. Connect the power adapter to the power port on the back of the Smart Repeater Connect the two included high gain antennas by screwing them into the antenna connectors Use the included Ethernet cable to connect one end into any LAN port on the Smart Repeater and use the other end to connect to the network port on your laptop or desktop computer. Do NOT attempt to connect to the Smart Repeater with a wireless connection at this time.
SR300 USER’S GUIDE Open your Web Browser to Access the Setup Wizard a. b. c. Open your web browser Type in: http://setup.ampedwireless.com into the web address bar If the web menu fails to open type in the following IP address into your web address bar: http://192.168.1.
SR300 USER’S GUIDE Welcome to the Smart Setup Wizard When the web menu appears, click Next to continue to the next page. The diagram on this page displays the terms used to describe: 1) The network you are trying to repeat (Home Network) 2) The network that is rebroadcasted and extended (Extended Network) Study this diagram carefully as the terms used in the following instructions will refer to these names.
SR300 USER’S GUIDE Scan for a Wireless Network Click SCAN to begin searching for available wireless networks to repeat. Highlight your network and click Next to continue. If you fail to find any wireless networks, the Smart Repeater may be placed too far from the wireless network that you are trying to repeat. Move your Smart Repeater closer to the wireless network that you are trying to repeat and click SCAN again.
SR300 USER’S GUIDE Connecting to a Secure Network If the wireless network you are trying to repeat has wireless security enabled, you will be prompted to enter a security key. If you did not select a secure network, continue to the next step. Enter the security key in the space provided. You do not need to select what type of security it is, just simply type in the key and click Next. The Smart Setup Wizard will automatically take care of the rest.
SR300 USER’S GUIDE Repeater Settings (SSID) The default SSID of the Smart Repeater is “Amped_Wireless” This SSID for the Extended Network may be changed by adjusting the name in the field for the Extended Wireless Network ID. This ID will be used by wireless users connecting to the Smart Repeater to identify the Smart Repeater’s Extended Network. It is recommended to use the default settings.
SR300 USER’S GUIDE Repeater Settings (Security) By default, the Extended Network has security enabled. The WPA security key is “wireless.” Users trying to connect to the Smart Repeater wirelessly will be prompted to enter this key. It is recommended that you use the default settings for the wireless security key. To change the security key, simply retype your new key in the field and click Next. Write your security key down somewhere safe for future reference.
SR300 USER’S GUIDE Setup Summary Once the Smart Repeater has rebooted, It will load the Setup Summary page and provide you with the details of your setup. At this time, you may disconnect from the Smart Repeater start a wireless connection. If you have any wired devices that you would like to attach to the Smart Repeater you may do so now as well. Enjoy your Extended network.
SR300 USER’S GUIDE If the Home Network connection fails try the following… a. b. c. d. e. f. Check to see that your Home Network security settings are correct. Check that your Home Network router’s DHCP server is enabled. Try changing the channel of the Home Network router to a higher channel number (5-11) and run the Setup Wizard again. If possible, check the Internet connection for your Home Network wireless router. Connect directly to your Home Network wireless router.
SR300 USER’S GUIDE WIRELESS SETTINGS Home Network Settings The Home Network Settings page allows you to adjust settings for your Home Network connection. These settings are for adjusting the Smart Repeater after you have already gone through the Smart Setup Wizard and wish to adjust your current configurations. Home Network SSID: Manually enter the Identification name of the Home Network you wish to connect to Channel Number: Enter the channel number of the Home Network.
SR300 USER’S GUIDE Extended Network Settings The Extended Network Settings page allows you to adjust settings for your Extended Network. Band: Allows you to setup access under a specific combination of Wi-Fi speed standards. Broadcast SSID: Disabling the broadcasting of your SSID will make it so outside users cannot see your network when they scan for wireless networks. Users must manual enter the SSID to connect. SSID of Extended Network: This is the name of your Extended Network.
SR300 USER’S GUIDE Multiple SSID: You may add additional names (SSID) to you Extended Network with different characteristics for each SSID. Each additional AP or SSID can have its own security, band and data rate settings. You may restrict users for specific SSIDs or provide access only to some users with lower bandwidth by changing the band. (i.e. only allow 802.11b access to specific users) Associated Clients: View all computers and network devices that are connected to your Extended Network wirelessly.
SR300 USER’S GUIDE Wireless Settings: Security Wireless security allows you to change the type of wireless security settings for your Extended Network or your Home Network. Note: If you adjust the security in your Home Network and it is incorrect, you will no longer have a successful connection to your Home Network. Using the drop down menu, you can select which network you wish to configure and adjust the security settings below.
SR300 USER’S GUIDE Wireless Settings: Wi-Fi Protected Setup (WPS) WPS is a Wi-Fi feature created to make Wi-Fi setup simpler and easier. Some wireless routers and adapters support this feature with varying names (i.e. one touch setup or WPS). You may enable WPS setup here by selecting the type of WPS setup you wish to use. The Smart Repeater supports all types of WPS setup: Push button: You may push the WPS button on the web menu or use the physical button on the back of the Smart Repeater.
SR300 USER’S GUIDE Wireless Settings: Advanced Settings It is recommended that only experts in Wi-Fi configuration adjust the advanced wireless settings for the Smart Repeater. These settings allow you to control the details of your wireless network configuration.
SR300 USER’S GUIDE SMART FEATURES The Smart Repeater provides your Extended Network with Smart Features that help to provide convenience and protection for your Extended Network. The Smart Features allow you control access to your Extended Network through on/off schedules, specific user authorizations as well as through the size of your wireless coverage for your Extended Network. These settings are ONLY for your Extended Network and do not apply to your Home Network.
SR300 USER’S GUIDE Wireless Settings: Access Schedule You can set a schedule for when your Wi-Fi is enabled or disabled (both Home Network and the Extended Network) through the Access Schedule feature. To do so: a. b. c. d. Enable Access Schedule Select which days you wish for your Wi-Fi to be available Select the time frame during that day that you wish for Wi-Fi to be available Apply Changes Enabling Access Schedule will also disable internet access for wired connections.
SR300 USER’S GUIDE User Access Control: User Access allows you to deny access or allow access to specific users connecting wirelessly to the Extended Network. Each networking device has a unique address called a MAC address (a 12 digit hex number). By inputting the MAC address into the field, you can define whether that device is allowed into your network or not allowed.
SR300 USER’S GUIDE Wireless Coverage Controls: Adjust the output power of the Smart Repeater to control the coverage distance of your Extended Wireless Network. For a smaller coverage area you can select a lower output power. For the maximum wireless coverage select the 100% selection. Note that if you select a lower output power, your connection to your Home Network will also decrease in range. So be careful and test your signal strength after each adjustment.
SR300 USER’S GUIDE IP SETTINGS IP Address: The IP address of the Smart Repeater Subnet Mask: the subnet of the Smart Repeater Default Gateway: The access point to another network, normally the Smart Repeater or your router. DHCP: The Smart Repeater includes a complex AUTO DHCP feature to help manage the IP addresses within your Extended network and with your Home Network. When connected to a Home Network the Repeater will obtain an IP address from your Home Network’s router and act as a DHCP Client.
SR300 USER’S GUIDE DHCP Client Range: The range of IP addresses the Smart Repeater’s DHCP server will assign to users and devices connecting to the Smart Repeater. Static DHCP: You may set a static IP address within your DHCP network. The Smart Repeater will track the device via its MAC address and assign it a pre-defined IP address each time the device logs into the network. obtain IP settings from the Home router or to manually enter your IP settings.
SR300 USER’S GUIDE MANAGEMENT FEATURES The Management features on the Smart Repeater allow you to view the status of your Home Network and Extended Network. The Repeater Status page provides full information regarding each connection (Home and Extended), including the IP address, current connection SSID and current state. This page is often used to check the health of your Home or Extended Network connection. The Network Statistics page provides detailed traffic data for each connection type.
SR300 USER’S GUIDE Management: System Clock Maintain the internal clock for the Smart Repeater by syncing with your computer’s time. Your system clock settings need to be accurate in order for logs and wireless access schedules to work correctly.
SR300 USER’S GUIDE Management: Upgrade Firmware The Wireless Smart Repeater uses internet software (firmware) to operate. In the event that a new firmware file is available you may update it here. During the upgrade process DO NOT power off the device to avoid damage to the Wireless Smart Repeater. To check for new firmware click the Check button. If a new firmware is available you will be given the option to install. To manually upgrade your firmware: a. b. c. Download the file from the www.
SR300 USER’S GUIDE Management: Save and Reload Settings Saving your current settings allows you to back-up your current settings which may be reloaded at a later time. This feature may be useful for testing new features and settings without having to worry about returning to a stable platform. To save current settings: a. b. Click Save Select a file name and location To load previously saved settings: a. b. c.
SR300 USER’S GUIDE Management: Password Settings By default, the Smart Repeater does not require a password to login to the web menu. If you wish to enable a password to protect unauthorized access to the web menu and Smart Setup Wizard, you may enter one here.
SR300 USER’S GUIDE TECHNICAL SPECIFICATIONS Wireless Standard: 802.11n, 802.11b/g Frequency Band: 2.
SR300 USER’S GUIDE DEFAULT SETTINGS The default settings for your Smart Repeater are listed here. If for some reason you need to return your Smart Repeater back to default settings, hold down the Reset button on the back panel for 10 seconds. The Smart Repeater will reset back to factory settings as listed below: IP Address: 192.168.1.240 Web Menu Access: http://setup.ampedwireless.
SR300 USER’S GUIDE TROUBLESHOOTING AND SUPPORT INFORMATION We are here to help. If you have any issues with your Smart Repeater please contact us. To contact Amped Wireless’ Technical Support use one of the following methods: Phone: 888-573-8820 Email: techsupport@ampedwireless.com Web: www.ampedwireless.
SR300 USER’S GUIDE Troubleshooting The tips in this guide are listed in order of relevance. Try solution (a) before trying solution (b) etc… I entered setup.ampedwireless.com and it failed to open the Web Menu. a. b. c. d. e. f. Make sure your computer is connected to the Smart Repeater using the included Ethernet cable. Do not try to connect with a wireless connection. Ensure that the power on the Smart Repeater is on. Close your current web browser and reopen it. Try the web address again.
SR300 USER’S GUIDE I cannot connect to my Home Network. I received an Error when running the Smart Setup Wizard. a. b. c. Your Home Network may be secured. Double check that you have the correct security key to connect to the Home Network. Try adjusting the channel number of your Home Network’s router to channel 5 thru 11. Then attempt the Smart Setup Wizard again. Check to see that your Home Network router’s DHCP server is enabled. The Smart Repeater needs to obtain an IP from your Home Network router.
SR300 USER’S GUIDE My Smart Repeater was working fine previously but now I can no longer access the Internet through the Smart Repeater. a. b. c. d. The connection to your Home Network has been dropped. This can be caused by several events to your home wireless connection. When this occurs you may rescan for another network by accessing http://setup.ampedwireless.com to connect to and repeat or you may try to fix the issues with your Home Network and your home wireless router.
SR300 USER’S GUIDE I have a dual-band router and I cannot repeat it. a. Log into the Web Menu for your dual-band wireless router and adjust the wireless settings. Change the wireless band to 2.4GHz single band mode only. Disable the 5GHz wireless band. I cannot find any wireless networks (Home Networks) to repeat. a. b. c. The Smart Repeater may be out of range. Move the Smart Repeater closer towards the wireless router and try the Setup Wizard again from the Web Menu.
SR300 c. USER’S GUIDE There may be an IP conflict with your Home Network and your Extended Network. Try to adjust the IP Settings of your Extended Network using IP values that are different from your Home Network. I can no longer connect to the Smart Repeater wirelessly. a. b. Power on and off the Smart Repeater and try again. The connection to the Home Network may be down. Use an Ethernet cable and connect directly to the Smart Repeater. Access http://setup.ampedwireless.
SR300 USER’S GUIDE Wizard again. After you have successfully reset the Home Network connection, try connecting wirelessly again. I can no longer access the Web Menu or the Smart Repeater no longer responds. a. Connect to your Smart Repeater and try to access http://setup.ampedwireless.com using your web browser. b. If you are advanced in networking troubleshooting, log onto your home router’s web interface.
SR300 USER’S GUIDE The connection to the Home Network seems slow. File transfers take a long time to transfer. a. b. c. You may be too far away from your Home Network. The closer the Smart Repeater is to your Home Network, the better its connection will be. The Smart Repeater must have a strong signal in order to repeat the signal with fast speeds and further range. Move the Smart Repeater closer to your Home Network and try again.
SR300 USER’S GUIDE My Wireless Access Schedule is being erratic and not working at the correct times. a. You need to adjust your Time Zone Settings from the Management Web Menu page. WiFi Protected Setup (WPS) is not working. Push button configuration does not detect the connection. a. The Smart Repeater supports WPS connections however some companies may use proprietary code for their own push button configurations. Try connecting using the Windows wireless utility or Mac wireless utility instead.
SR300 USER’S GUIDE WARRANTY AND REGULATORY INFORMATION The Amped Wireless (A division of Newo Corporation, Inc.) Limited Warranty Warranty Period: The Amped Wireless Limited Warranty is for one (1) year from the date of purchase for new products. Refurbished products carry the Limited Warranty for thirty (30) days after the date of purchase.
SR300 USER’S GUIDE Limitations: IN NO EVENT SHALL AMPED WIRELESS’ (NEWO CORPORATION’S) LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, ACCESSORIES OR ITS DOCUMENTATION.
SR300 USER’S GUIDE warranty claims. You are responsible for properly packaging and shipping the product at your cost and risk to Amped Wireless. The bearer of cost related to shipping repaired or replaced product back to the purchaser will be at the sole discretion of Amped Wireless and determined based on the details of each RMA case. Customers outside of the United States of America are responsible for all shipping and handling costs including custom duties, taxes and all other related charges.
SR300 USER’S GUIDE Regulatory Information FCC Statement and Declaration: Amped Wireless declares that this device complies with Part 15 of the FCC Rules and Regulations. Operation of this device is subject to the following two (2) conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation.
SR300 - USER’S GUIDE Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution and Safety Notices: Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
SR300 USER’S GUIDE Industry Canada Statement: This Class B digital apparatus complies with RSS-210 and ICES-003 of the Industry Canada Rules. Operation of this device is subject to the following two (2) conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
SR300 USER’S GUIDE Déclaration d’Industrie Canada : Cet appareil numérique de classe B est conforme aux réglementations RSS210 et ICES-003 d’Industrie Canada. Le fonctionnement de cet appareil est sujet aux deux conditions suivantes: (1) Cet appareil ne peut pas causer de brouillage préjudiciable (2) Cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant provoquer un dysfonctionnement.
tech support e-mail web 888-573-8820 techsupport@ampedwireless.com www.ampedwireless.com Amped Wireless A Division of Newo Corporation Copyright © 2011 Amped Wireless / Newo Corporation. All rights reserved. Amped Wireless, Newo Corporation, the Amped Wireless Logo are registered trademarks or trademarks of Newo Corporation.
