User's Manual

SR300
USER’S GUIDE
10
Scan for a Wireless Network
Click SCAN to begin searching for available wireless
networks to repeat.
Highlight your network and click Next to continue.
If you fail to find any wireless networks, the Smart
Repeater may be placed too far from the wireless network
that you are trying to repeat. Move your Smart Repeater
closer to the wireless network that you are trying to
repeat and click SCAN again.
The Scan results page will display information regarding
the name of the network (SSID), the channel which the
wireless network is operating on and the type of network
that it is. AP stands for Access Point and is the standard type of wireless network. The results page will also
display whether or not your network has security and what the signal strength is coming from each specific
network detected.