User's Manual

SR300
USER’S GUIDE
16
WIRELESS SETTINGS
Home Network Settings
The Home Network Settings page allows you to adjust settings
for your Home Network connection. These settings are for
adjusting the Smart Repeater after you have already gone
through the Smart Setup Wizard and wish to adjust your
current configurations.
Home Network SSID: Manually enter the Identification name
of the Home Network you wish to connect to
Channel Number: Enter the channel number of the Home
Network. If the channel number does not match, a
connection will not be established.
Channel Width: Wi-Fi operates in two separate channel widths, 20Hz and 40Hz. 20Hz allows operation on
channels 1-11, while 40Hz is 5-11. 40Hz allows for faster speeds. Select the channel width you wish to use for
your network. This setting must match that of your Home Network for a successful connection.