User's Manual

SR300
USER’S GUIDE
36
Troubleshooting
The tips in this guide are listed in order of relevance. Try solution (a) before trying solution (b) etc…
I entered setup.ampedwireless.com and it failed to open the Web Menu.
a. Make sure your computer is connected to the Smart Repeater using the included Ethernet cable. Do
not try to connect with a wireless connection. Ensure that the power on the Smart Repeater is on.
b. Close your current web browser and reopen it. Try the web address again.
c. Try to use a different web browser. We recommend the Google Chrome web browser.
d. Try to open your web browser to the default IP address by putting this number into your web browser
instead: 192.168.1.240
e. Power off (unplug the power adapter) the Smart Repeater and power it back on. Try again.
f. Reset your Smart Repeater to default settings by holding the Reset Button (located on the back panel)
for ten (10) seconds and try again