User’s Guide TAP-R3 HIGHPOWER TOUCH SCREEN AC1750 WI-FI ROUTER TM ®
TAP-R3 USER’S GUIDE CONTENTS INTRODUCTION .................................................. 4 GETTING STARTED .............................................. 5 Wi-Fi Protected Setup (WPS) .................................................. 26 Access Schedule ...................................................................... 27 Package Contents ...................................................................... 5 Product Description...................................................................
TAP-R3 USER’S GUIDE Local Sharing .......................................................................... 46 FTP Server............................................................................... 47 Wi-Fi Protected Setup – WPS (2.4GHz) ................................... 72 Wireless Coverage Controls (2.4GHz)...................................... 73 Access Schedule (2.4GHz) ....................................................... 73 BASIC SETUP GUIDE (WEB MENU) .....................
TAP-R3 USER’S GUIDE ROUTING SETUP ............................................. 101 MANAGEMENT FEATURES .............................. 102 System Status ....................................................................... 103 Network Statistics ................................................................ 104 Dynamic DNS Settings .......................................................... 105 System Clock ........................................................................ 106 System Logs .........
TAP-R3 USER’S GUIDE INTRODUCTION Thank you for purchasing this Amped Wireless product. At Amped Wireless we strive to provide you with the highest quality products through innovation and advanced technology. We pride ourselves on delivering products that outperform the competition and go beyond your expectations. If you have any questions please feel free to contact us. We’d love to hear from you and thank you for your support! Email: sales@ampedwireless.com Call: 888-573-8830 Web: www.ampedwireless.
TAP-R3 USER’S GUIDE GETTING STARTED Package Contents Check to make sure you have all the contents within your package: High Power Touch Screen AC1750 Wi-Fi Router Detachable High Gain Antenna Stylus RJ-45 Ethernet Cable Power Adapter Setup Guide Product Stand CD: User’s Guide & Installation Video 5
TAP-R3 USER’S GUIDE Product Description 1. LCD Screen: 4” LCD touch screen. Displays the user interface for configuring the Router as well as the status. 2. Stylus: Input tool that assists in navigating the LCD touch screen Menu. 3. Antenna Connector (ANT): RJ-SMA antenna connector. Compatible with all antennas that have RP-SMA connectors. 4. USB Port: Attach USB storage devices, such as a USB flash drive or external hard drive, for file sharing. 5.
TAP-R3 USER’S GUIDE BASIC SETUP GUIDE (TOUCH) Setup Preparations Disconnect and power off your existing router. Disconnect your existing router from your computer, your broadband modem and its power outlet. If you do not have an existing router please continue to the next step. Power off your Modem Power off the modem by disconnecting the modem’s power adapter from the power outlet. If your modem has a backup battery, remove the backup battery from your modem.
TAP-R3 USER’S GUIDE Connect the Router to your Modem Do NOT connect the power adapter to the Router at this time. a) Use the included blue Ethernet cable and connect one end of the cable to your modem. b) Connect the other end of the cable to the blue Modem port on the back of the Router.
TAP-R3 USER’S GUIDE Power on your Modem Plug in your modem’s power adapter and backup battery (if available): 9
TAP-R3 USER’S GUIDE Power ON the Router a. b. c. Attach the included antenna. Attach the Power Adapter to the Router’s PWR Port on the back of the Router and plug it into an available power outlet. The Amped Wireless logo will appear as the unit boots up, then the Dashboard screen will appear.
TAP-R3 USER’S GUIDE Navigating the Touch Screen Menu Before we begin, here are a few tips on how to navigate the Touch Screen Menu: Language Selection: Tap the Globe icon, found on the bottom of the Settings screen, to change the language of the menu. Back Arrow: Tap the Left Arrow, found on the upper left corner of many screens, to navigate back to the previous page. Home Button: Tap the Home icon, found on the bottom of many screens, to return to the Dashboard at any time.
TAP-R3 USER’S GUIDE Welcome to the Dashboard The Dashboard will provide you with the current status of the Router. Tap Basic Setup to configure your Internet connection. If the Dashboard shows that the Router is already connected to the Internet (Green check mark), please Tap WI-FI Setup to configure your Wi-Fi network.
TAP-R3 USER’S GUIDE Check Connections If you have not already done so, please reboot your Modem and check that your Modem is connected to the Router. Once this is complete tap Next. Internet Connection Setup Select Automatic Setup (DHCP) to have the Wizard automatically configure your Internet connection. For more advanced users who wish to manually configure their IP address settings, please tap Manual/Static IP.
TAP-R3 USER’S GUIDE Internet Connection Setup The Wizard will try to detect your Internet settings and configure the Router. Please be patient. If there is a problem with the Automatic Configuration, the wizard will notify you of the issue. If you continue to have problems, contact our Elite Support department at 888-573-8820. If the Internet connection detection was successful, you will see a green check mark. Tap Next to continue.
TAP-R3 USER’S GUIDE Wi-Fi Setup The default IDs of your 5GHz Wi-Fi network and 2.4GHz Wi-Fi network are: TAP Amped_TAPR3_5.0 Amped_TAPR3_2.4 To change it, tap the SSID field to configure the name of your Wi-Fi network. Users connecting wirelessly to the Router will use these IDs to identify your wireless network. The default Security Key (WPA/WPA2) of your Wi-Fi networks is: wireless To change it, tap the Security Key field and enter a new key for each Wi-Fi networks.
TAP-R3 USER’S GUIDE Setup Summary Congratulations, your Router is now configured. The Setup Summary provides you with the details of your setup. At this time, you may connect additional devices to the Router using a wired or wireless connection. The details of your Wi-Fi settings, Internet connection and local network settings can be found on these screens.
TAP-R3 USER’S GUIDE MORE SETTINGS (TOUCH SCREEN) The Router’s Touch Screen Menu provides a host of features that you can easily configure with the touch of your finger. To access the main Settings Menu tap More Settings from the Dashboard. From there you can access additional Wi-Fi Settings, Network Settings, Security Features, USB Storage or Management Settings. Note: For more advanced features and detailed options please access the web menu through your web browser, http://setup.ampedwireless.
TAP-R3 USER’S GUIDE 2.4GHz WI-FI SETTINGS (TOUCH SCREEN) 2.4GHz Wi-Fi Settings (Touch): Basic Settings The Basic Settings page allows you to adjust settings for your 2.4GHz local wireless network. Enable 2.4GHz Wi-Fi: Disabling will turn off all 2.4GHz Wi-Fi activity. Users will no longer be able to connect wirelessly to your 2.4GHz network. Wi-Fi Network SSID: The name of your 2.4GHz wireless network Security Key: Enter the security key of the 2.4GHz wireless network.
TAP-R3 USER’S GUIDE 2.4GHz Wi-Fi Settings (Touch): Guest Network The Router supports 4 additional 2.4GHz Guest Networks. Guest Networks provide a separate Wi-Fi network with unique names and security keys. Select a number 1 through 4 and toggle the Guest Network to On to activate the Guest Network. Guest Network SSID: This is the Identification name of your new Guest Network. Security Key: Enter the security key of the Guest Network.
TAP-R3 USER’S GUIDE 2.4GHz Wi-Fi Settings (Touch): Wi-Fi Coverage Controls Adjust the output power of the Router to control the coverage distance of your 2.4GHz Wi-Fi Network. For a smaller coverage area you can select a lower output power. For the maximum WiFi coverage select the 100% selection.
TAP-R3 USER’S GUIDE 2.4GHz Wi-Fi Settings (Touch): Wi-Fi Protected Setup (WPS) WPS is a Wi-Fi feature created to make Wi-Fi setup simple and easy. Some Wi-Fi routers and adapters support this feature with varying names (i.e. One Touch Setup or WPS). You may enable WPS setup here by tapping Start WPS PBC. Follow the steps on the Router to complete WPS setup. More detailed settings can be found by accessing the web menu, setup.ampedwireless.com.
TAP-R3 USER’S GUIDE 2.4GHz Wi-Fi Settings (Touch): Access Schedule You can set a schedule for when your Wi-Fi is enabled or disabled through the Access Schedule menu. To do so: a. b. c. d. Toggle the Access Schedule to On. Select which days you wish for your Wi-Fi to be available, one day at a time. Select the first day and tap Next. Then select the time frame during that day that you wish for WiFi to be available. Tap Apply to save your settings.
TAP-R3 USER’S GUIDE 5.0GHz WI-FI SETTINGS (TOUCH SCREEN) 5.0GHz Wi-Fi Settings (Touch): Basic Settings The Basic Settings page allows you to adjust settings for your 5.0GHz local wireless network. Enable 5.0GHz Wi-Fi: Disabling will turn off all 2.4GHz Wi-Fi activity. Users will no longer be able to connect wirelessly to your 2.4GHz network. Wi-Fi Network SSID: The name of your 5.0GHz wireless network Security Key: Enter the security key of the 5.0GHz wireless network.
TAP-R3 USER’S GUIDE 5.0GHz Wi-Fi Settings (Touch): Guest Network The Router supports 4 additional 5.0GHz Guest Networks. Guest Networks provide a separate Wi-Fi network with unique names and security keys. Select a number 1 through 4 and toggle the Guest Network to On to activate the Guest Network. Guest Network SSID: This is the Identification name of your new Guest Network. Security Key: Enter the security key of the Guest Network.
TAP-R3 USER’S GUIDE 5.0GHz Wi-Fi Settings (Touch): Wi-Fi Coverage Controls Adjust the output power of the Router to control the coverage distance of your 5.0GHz Wi-Fi Network. For a smaller coverage area you can select a lower output power. For the maximum Wi-Fi coverage select the 100% selection.
TAP-R3 USER’S GUIDE 5.0GHz Wi-Fi Settings (Touch): Wi-Fi Protected Setup (WPS) WPS is a Wi-Fi feature created to make Wi-Fi setup simple and easy. Some Wi-Fi routers and adapters support this feature with varying names (i.e. One Touch Setup or WPS). You may enable WPS setup here by tapping Start WPS PBC. Follow the steps on the Router to complete WPS setup. More detailed settings can be found by accessing the web menu, setup.ampedwireless.com.
TAP-R3 USER’S GUIDE 5.0GHz Wi-Fi Settings (Touch): Access Schedule You can set a schedule for when your Wi-Fi is enabled or disabled through the Access Schedule menu. To do so: a. b. c. d. Toggle the Access Schedule to On. Select which days you wish for your Wi-Fi to be available, one day at a time. Select the first day and tap Next. Then select the time frame during that day that you wish for Wi-Fi to be available. Tap Apply to save your settings.
TAP-R3 USER’S GUIDE NETWORK SETTINGS (TOUCH) Network Settings: Local Network These settings are for your local network only and do not apply to your Internet / ISP connection. IP Address: The IP address of the Router. Subnet Mask: The subnet of the Router. Default Gateway: The access point to another network. DHCP: Each network device on your local network will have its own IP Address. The DHCP server automatically assigns the IP addresses to each device connected to your network.
TAP-R3 USER’S GUIDE Network Settings: Internet Connection The Basic Setup Wizard will assist you in setting up your Internet connection. However, in the case that you wish to adjust settings manually, the options on this page provides you with the tools to do this easily. Select your Internet Connection type from the drop down menu: Automatic Setup (DHCP): This is the configuration type most often used by Internet providers. Automatic configurations are used by both DSL and Cable as well as other providers.
TAP-R3 USER’S GUIDE If for some reason you do not get an IP address and you know that your Internet provider uses DHCP, try resetting your modem. Remove the power adapter from the modem as well as the backup battery (if available). Wait about 30 seconds and then power the modem back on. You can run through the Basic Setup Wizard again to see if that fixes your Internet connection issues.
TAP-R3 USER’S GUIDE SECURITY FEATURES (TOUCH) Security Features: Block Websites To block a website, you must first enable website blocking by toggling the switch to On. After it has been enabled, you can add websites into the URL field that you wish to block. Note: If you wish to block www.website.com, simply type in "website" and the Router will block all websites with the text "website" in the URL.
TAP-R3 USER’S GUIDE Security Features: User Access (Mac) User Access (Mac) allows you to deny access or allow access to specific users that are connecting wirelessly to the Router’s network via Mac Addresses. Each network device has a unique address called a MAC address (a 12 digit hex number). By inputting the MAC address into the field, you can define whether that device is allowed to connect to your network or not allowed.
TAP-R3 USER’S GUIDE Security Features: User Access (IP) User Access (IP) allows you to deny access or allow access to specific users that are connecting wirelessly to the Router’s network using their IP address. Toggle the switch to On to enable Users Access (IP). Input an IP Address into the field and the network device with that specific IP address will no longer be able to access the Internet or the Router. You may add multiple IP address that you wish to block access to.
TAP-R3 USER’S GUIDE Security Features: Demilitarized Zone (DMZ) A DMZ is a network location or IP Address that is not protected by the firewall. When enabling DMZ, it is important to note that the device on the IP Address designated as part of the DMZ does not have any protection from the Router’s firewall. The device’s only security would be those built into the operating system. As a general safety rule, devices placed on the DMZ should not have any other network connections to any other devices.
TAP-R3 USER’S GUIDE Security Features: Port Forwarding Port Forwarding is a rule that tells the Router that if a specific type of request comes in on a specific port, then that request should be forwarded to a specific device on the private network. Port Forwarding is often used for setting up servers, cameras and other devices that require remote access. Enable Port Forwarding: Enables designated ports to begin forwarding.
TAP-R3 USER’S GUIDE Security Features: Port Filtering Port Filtering is a security measure that prevents users from using specific ports for reasons other than what those ports were originally intended for. For example, TCP port 21 is traditionally used for FTP. However, there is nothing stopping a user from using port 21 for purposes other than FTP access. By enabling Port Filtering on TCP port 21, only FTP communications would be allowed. No other types of communication would be allowed on this port.
TAP-R3 USER’S GUIDE MANAGEMENT SETTINGS (TOUCH) Management (Touch): Screen Settings Manage the behavior and security of the LCD screen: Timeout: When the touch screen is inactive past the duration of the Timeout time (in seconds), it will turn off to conserve power. Lock Passcode: You can turn on a screen that has turned off simply by touching the screen. The Lock Passcode is a 4 digit security code used to secure access to the screen. If the Passcode is incorrect, the Touch Screen Menu will not appear.
TAP-R3 USER’S GUIDE Management (Touch): Clock / Date Maintain the internal clock for the Router by syncing with the time with the Internet. Your clock and date settings need to be accurate in order for Logs and Wi-Fi Access Schedules to work correctly. If you wish for the Clock to show on your screen when the Router is timed-out, toggle this to On. Be sure to Apply settings to save them.
TAP-R3 USER’S GUIDE Management (Touch): System Status The System Status provides you with a snapshot of your Router’s current connections and settings. The System Information section provides you with the router’s firmware version and build. This is used to help our support department determine what firmware version your device is running. The Current Date / Time is the setting for the system clock. If this time is off, go to the System Clock section and configure your system time.
TAP-R3 USER’S GUIDE Management (Touch): Connected Users Connected Users displays all users currently connected to the Router’s network. If available, It provides a list of name, IP address and MAC address of each connected device.
TAP-R3 USER’S GUIDE Management (Touch): Statistics Network statistics shows the data activity for each connection type on the Router (Internet, Wireless and Wired). 2.4GHz and 5.0GHz Wi-Fi shows the data activity for all devices connected to the Wi-Fi networks of the Router. The Wired Connection statistics shows all data activity for all users physically connected to the wired ports on the Router.
TAP-R3 USER’S GUIDE Management (Touch): Logs The System Log is useful for viewing the activity and history of your Router. The System Log is also used by Amped Wireless technicians to help troubleshoot your router when needed. It is recommended that you enable all logs in the event that troubleshooting is required. All log entries will be deleted each time the Router reboots or is powered off.
TAP-R3 USER’S GUIDE Management (Touch): Upgrade Firmware Amped Wireless continuously updates the firmware for all products in an effort to constantly improve our products and their user experiences. When connected to an active connection with Internet access, the Router can automatically check for new firmware updates that are available by tapping Check for Updates. Follow the prompts to complete the upgrade process.
TAP-R3 USER’S GUIDE Management (Touch): Dynamic DNS The Dynamic Domain Name System (DDNS) is a method to keep a web domain name, or web address, linked to a changing IP address as most Internet Providers do not provide static IP addresses. To use DDNS, you must first set up an account with a DDNS provider. The Router supports two of these providers (TZO and DynDNS). Once the DDNS service has been set up you will be given a login and password. Enter it on this page along with your registered DDNS domain.
TAP-R3 USER’S GUIDE Management (Touch): Reset Settings Reset the Router’s settings to factory settings by pressing Reset. By resetting the Router you will lose all previous configurations and will need to run the Basic Setup Wizard again to configure the Router’s Settings.
TAP-R3 USER’S GUIDE USB STORAGE (TOUCH) USB Storage (Touch): Local Sharing Share a USB storage device with computers on the Router’s network. Insert a USB storage device, such as a flash drive or external hard drive, to the USB port on the side of the Router. The computer must be connected to the Router’s network in order to access the storage device. You may also want to Map the Network Drive so it shows up as a standard drive on your computer for easier access.
TAP-R3 USER’S GUIDE USB Storage (Touch): FTP Server Share a USB storage device with computers remotely over the Internet. A FTP server allows you to access files through the use of an FTP client remotely over the Internet. Insert a USB storage device, such as a flash drive or external hard drive, to the USB port on the side of the Router.
TAP-R3 USER’S GUIDE BASIC SETUP GUIDE (WEB MENU) Setup Preparations Disconnect and power off your existing router. Disconnect your existing router from your computer, your broadband modem and its power outlet. If you do not have an existing router please continue to the next step. Power off your Modem Power off the modem by disconnecting the modem’s power adapter from the power outlet. If your modem has a backup battery, remove the backup battery from your modem.
TAP-R3 USER’S GUIDE Connect the Router to your Modem Do NOT connect the power adapter to the Router at this time. a) Use the included blue Ethernet cable and connect one end of the cable to your modem. b) Connect the other end of the cable to the blue Modem port on the back of the Router.
TAP-R3 USER’S GUIDE Power on your Modem Plug in your modem’s power adapter and backup battery (if available): 50
TAP-R3 USER’S GUIDE Attach the Antenna, Power On & Connect to your Computer a) Attach the antenna to the antenna connector on the Router. b) Attach the Power Adapter to the Router’s PWR port and a power outlet. c) Connect an Ethernet cable to an available port on your computer or connect to the Router’s Wi-Fi Network: Amped_TAPR3_2.4 or Amped_TAPR3_5.0.
TAP-R3 USER’S GUIDE Open your Web Browser to Access the Setup Wizard a) Open your web browser. b) Type http://setup.ampedwireless.com into the web address bar. c) If the web menu fails to open, type the following IP address into your web address bar: http://192.168.3.
TAP-R3 USER’S GUIDE Welcome to the Setup Wizard If this is your first time setting up the Router, the Setup Wizard should automatically load. If you wish to manually configure your router you can also choose to skip the Setup Wizard. Double check that the modem is connected to the Router’s Modem port on the back of the Router. Check that the antenna is attached firmly to the antenna connector. Click Next to continue.
TAP-R3 USER’S GUIDE Internet Connection Detection The Wizard will try to detect your Internet settings and configure the router. Please be patient. If there is a problem with the Automatic Configuration, the wizard will notify you of the issue. If you continue to have problems, contact our Elite Support department at 888573-8820. If the Internet connection detection was successful, you will see a green check mark. Click Next to continue.
TAP-R3 USER’S GUIDE Personalize your Wi-Fi Settings The default ID of your 5GHz Wi-Fi network and 2.4GHz Wi-Fi network is: Amped_TAPR3_5.0 Amped_TAPR3_2.4 To change it, enter a new name in the SSID field. Users connecting wirelessly to the Router will use these IDs to identify your wireless network. The default Security Key (WPA/WPA2) of your Wi-Fi networks is: wireless To change them, enter a new key in the Security Key field for both 2.4GHz and 5GHz networks. The keys must be at least 8 characters long.
TAP-R3 USER’S GUIDE Create a Password for your Router This password is NOT your Wi-Fi network password. This password is to access the web menu of the Router to access additional router settings. Leave this blank if you do not wish to have a password. Click Apply to save your settings. The Router will reboot. This process may take up to 1 minute. The page will automatically reload after the countdown. If it does not, you may need to manually refresh the page or check your connection to the Router.
TAP-R3 USER’S GUIDE Setup Summary Once the Router has rebooted, it will load the Setup Summary page and provide you with the details of your setup. It is recommended that you print this page for your records. Open a new web browser window and check that you have access to the Internet. At this time, you may disconnect from the Router and start a wireless connection. If you have any wired devices that you would like to attach to the Router you may do so now as well.
TAP-R3 USER’S GUIDE WEB MENU DASHBOARD Welcome to the Dashboard Once you have completed the Router Setup Wizard, going to http://setup.ampedwireless.com will now bring you to the Router’s Dashboard. The Dashboard provides you with information regarding your internet connection and basic router settings. From here you can enable or disable guest networks, have a quick glance at what devices are connected to your Router and enable or disable website blocking features.
TAP-R3 USER’S GUIDE 5GHz WI-FI SETTINGS 5GHz Wi-Fi Settings: Basic Settings (5.0GHz) The Basic Settings page allows you to adjust settings for your 5GHz local wireless network. Disable 5.0GHz Wireless Connections: Disabling will turn off all 5GHz Wi-Fi activity. Users will no longer be able to connect wirelessly to your 5GHz network. Band: Select the compatible Wi-Fi standard and speed for your wireless network.
TAP-R3 USER’S GUIDE Wireless Network ID (SSID): The name of your 5GHz wireless network. Channel Number: Wi-Fi networks operate on specific wireless channels. Some network channels may have more interference than others. If your performance is unstable, try a different channel number. If you are using a repeater with this network, it is recommended you set a static channel, instead of using "Auto". WMM: Prioritizes multimedia data over the wireless network.
TAP-R3 USER’S GUIDE 5GHz Wi-Fi Settings: Basic Settings: Guest Networks (5.0GHz) Guest Networks: You may add additional names (SSID) to your Wireless Network with different characteristics for each SSID. Each additional Network or SSID can have its own security, band and data rate settings. You may restrict users to specific SSIDs or provide access only to some users with lower bandwidth by changing the band (i.e. only allow 802.11b access to specific users).
TAP-R3 USER’S GUIDE 5GHz Wi-Fi Settings: Security Settings (5.0GHz) The Security page allows you to change the type of wireless security settings for your 5.0GHz wireless network. Using the drop down menu, you can select which network you wish to configure and may adjust the security settings below. If you are using the Guest Network feature, you will be able to adjust the security settings for your additional SSIDs as well. (For 2.4GHz Guest Networks, view the 2.
TAP-R3 USER’S GUIDE 5GHz Wi-Fi Settings: Advanced Settings (5.0GHz) Advanced Wireless Settings should only be adjusted by technically advanced users. It is not recommended that novice users adjust these settings to avoid degrading wireless performance. Fragment Threshold: The default and recommended setting is at 2346, meaning the Router will never fragment any frames that it sends to wireless users. RTS Threshold: Adjusts the size of RTS data packets.
TAP-R3 USER’S GUIDE 5GHz Wi-Fi Settings: Wi-Fi Protected Setup – WPS (5.0GHz) WPS is a Wi-Fi feature created to make Wi-Fi setup simple and easy. Some wireless routers and adapters support this feature with varying names (i.e. one touch setup or WPS). You may enable WPS setup here by selecting the type of WPS setup you wish to use. The Router supports all types of WPS setup: Option A: Push button: You may push the WPS button on the web menu or use the physical button on the back of the Router.
TAP-R3 USER’S GUIDE 5GHz Wi-Fi Settings: Wireless Coverage Controls (5.0GHz) Adjust the output power of the Router to control the coverage distance of your 5GHz wireless network. For a smaller coverage area, you can select a lower output power. For the maximum wireless coverage, select the 100% selection.
TAP-R3 USER’S GUIDE 5GHz Wi-Fi Settings: Access Schedule (5.0GHz) Access Schedules will enable or disable your 5GHz wireless access at a set time based on your predefined schedule. This feature is often used for restricting access to all users (such as children, employees, guests) during specific times of the day for parental control or security reasons. a) Enable Access Schedule b) Select which days you wish for your 5.
TAP-R3 USER’S GUIDE 2.4GHz WI-FI SETTINGS 2.4GHz Wi-Fi Settings: Basic Settings (2.4GHz) The Basic Settings page allows you to adjust settings for your 2.4GHz local wireless network. Disable 2.4GHz Wireless Connections: Disabling will turn off all 2.4GHz Wi-Fi activity. Users will no longer be able to connect wirelessly to your 2.4GHz network. Band: Select the compatible Wi-Fi standard and speed for your wireless network.
TAP-R3 USER’S GUIDE Channel Number: Wi-Fi networks operate on specific wireless channels. Some network channels may have more interference than others. If your performance is unstable, try a different channel number. If you are using a repeater with this network, it is recommended you set a static channel, instead of using "Auto." WMM: Prioritizes multimedia data over the wireless network. Associated Clients: Shows the active users connected wirelessly to your 2.4GHz network.
TAP-R3 USER’S GUIDE 2.4GHz Wi-Fi Settings: Basic Settings: Guest Networks (2.4GHz) Guest Networks: You may add additional names (SSID) to your Wireless Network with different characteristics for each SSID. Each additional Network or SSID can have its own security, band and data rate settings. You may restrict users to specific SSIDs or provide access only to some users with lower bandwidth by changing the band (i.e. only allow 802.11b access to specific users).
TAP-R3 USER’S GUIDE 2.4GHz Wi-Fi Settings: Security Settings (2.4GHz) The Security page allows you to change the type of wireless security settings for your 2.4GHz wireless network. Using the drop down menu, you can select which network you wish to configure and may adjust the security settings below. If you are using the Guest Network feature, you will be able to adjust the security settings for your additional 2.4GHz SSIDs as well.
TAP-R3 USER’S GUIDE 2.4GHz Wi-Fi Settings: Advanced Settings (2.4GHz) Advanced Wireless Settings should only be adjusted by technically advanced users. It is not recommended that novice users adjust these settings to avoid degrading wireless performance. Fragment Threshold: The default and recommended setting is at 2346, meaning the Router will never fragment any frames that it sends to wireless users. RTS Threshold: Adjusts the size of RTS data packets.
TAP-R3 USER’S GUIDE 2.4GHz Wi-Fi Settings: Wi-Fi Protected Setup – WPS (2.4GHz) WPS is a Wi-Fi feature created to make Wi-Fi setup simple and easy. Some wireless routers and adapters support this feature with varying names (i.e. one touch setup or WPS). You may enable WPS setup here by selecting the type of WPS setup you wish to use. The Router supports all types of WPS setup: Option A: Push button: You may push the WPS button on the web menu or use the physical button on the back of the Router.
TAP-R3 USER’S GUIDE 2.4GHz Wi-Fi Settings: Wireless Coverage Controls (2.4GHz) Adjust the output power of the Router to control the coverage distance of your 2.4GHz wireless network. For a smaller coverage area, you can select a lower output power. For the maximum wireless coverage, select the 100% selection.
TAP-R3 USER’S GUIDE 2.4GHz Wi-Fi Settings: Access Schedule (2.4GHz) Access Schedules will enable or disable your 2.4GHz wireless access at a set time based on your predefined schedule. This feature is often used for restricting access to all users (such as children, employees, guests) during specific times of the day for parental control or security reasons. a) Enable Access Schedule b) Select which days you wish for your 2.
TAP-R3 USER’S GUIDE NETWORK SETTINGS Network Settings: Local Network (LAN) These settings are for your local network only and do not apply to your Internet / ISP connection. IP Address: The IP address of the Router. Subnet Mask: The subnet of the Router. Default Gateway: The access point to another network. DHCP: Each network device on your local network will have its own IP Address. The DHCP server automatically assigns the IP addresses to each device connected to your network.
TAP-R3 USER’S GUIDE Set Static DHCP: This allows specific devices to be given a specific IP address each time the device connects to the network. The DHCP server will always assign the same IP address to the same device. This feature is often used for shared devices such as network printers or servers. 802.1d Spanning Type (STP): A network protocol that ensures a loop-free topology for networks that have Ethernet bridges.
TAP-R3 USER’S GUIDE Network Settings: IPv6 Local Network (LAN) These settings are for your IPv6 local network only and do not apply to your Internet / ISP connection. The LAN IPv6 LinkLocal Address is the IPv6 Address that you use to access the web-based management interface. If you change the LAN IPv6 Address here, you may need to adjust your PC’s network settings to access the network again. DHCP can be used to acquire an IPv6 prefix for the LAN interface.
TAP-R3 USER’S GUIDE DHCPv6 is a network protocol that is used for configuring IPv6 hosts with IP addresses, IP prefixes and/or other configurations required to operate on an IPv6 network. IPv6 hosts can acquire IP addresses by using DHCPv6. The DHCP Unique Identifier (DUID) is used by a client to get an IP address from a DHCPv6 server. The server compares the DUID with its database and delivers configuration data (address, lease times, DNS servers, etc.) to the client.
TAP-R3 USER’S GUIDE Network Settings: Internet Network (WAN) The Basic Setup Wizard will assist you in setting up your Internet connection. However, in the case that you wish to adjust settings manually, the options on this page provides you with the tools to do this easily. Select your Internet Connection type from the drop down menu: Manual IP (Static): For Internet connections where the Internet provider does not provide you with an IP address automatically.
TAP-R3 USER’S GUIDE If for some reason you do not get an IP address and you know that your Internet provider uses DHCP, try resetting your modem. Remove the power adapter from the modem as well as the backup battery (if available). Wait about 30 seconds and then power the modem back on. You can run through the Basic Setup Wizard again to see if that fixes your Internet connection issues. PPPoE connections normally requires login information.
TAP-R3 USER’S GUIDE Network Settings: IPv6 Internet Network (WAN) The Basic Setup Wizard will assist you in setting up your Internet connection. However, in the case that you wish to adjust settings for IPv6 connections, the options on this page provides you with the tools to do this easily. Each selection will have the option to select the WAN Link Type: IP or PPPoE. If your ISP requires login information, select PPPoE. If not, select IP.
TAP-R3 USER’S GUIDE Stateless Address Autoconfiguration (SLAAC): In this mode, configuration of addresses is based on the receipt of Router Advertisement messages. These messages include stateless address prefixes and require that hosts not use a stateful address configuration protocol. Stateless autoconfiguration does not require any sort of central management, and is therefore preferable in networks where no management is readily available, such as a typical home network.
TAP-R3 USER’S GUIDE Network Settings: Advanced Settings These settings apply to the Local Network and your Internet Connection Network. If you are not familiar with these settings, please refer to a network administrator to avoid putting your network at risk. Enable uPnP: Universal Plug and Play is a network feature that allows uPnP enabled devices to “just work” with each other when connected to the same network.
TAP-R3 USER’S GUIDE Enable Web Server Access on WAN (Remote Management): Allows access to the Web Menu over the Internet. Enable IPsec pass through on VPN connection: Allows the IP security protocol suite to pass through on a VPN connection. Network Settings: IPv6 Advanced Settings: Enable IPv6 pass through on VPN connection: Allows the IPv6 protocol suite to pass through on a VPN connection.
TAP-R3 USER’S GUIDE SMART FEATURES The Router provides your network with Smart Features that helps to provide convenience and protection for your wired and wireless network. The Smart Features allows you to control access of your wireless network through: on/off schedules, specific user authorizations, and wireless coverage control. These settings apply to your local wireless and wired network.
TAP-R3 USER’S GUIDE Smart Features: Block Websites To block a website, you must first enable URL filtering. After it has been enabled, you can begin adding as many websites as you wish into the URL Address field. Note: If you wish to block www.google.com, simply type in "google" and the Router will block all websites with the text "google" in the URL.
TAP-R3 USER’S GUIDE Smart Features: User Access (MAC Address Filtering) User Access allows you to deny access or allow access to specific users connecting to the network. Each networking device has a unique address called a MAC address (a 12 digit hex number). By inputting the MAC address into the field, you can define whether that device is allowed into your network or not allowed. A MAC Address may sometimes be referred to as a Physical Address.
TAP-R3 USER’S GUIDE Smart Features: User Access (IP Address Filtering) User Access (IP Filtering) is similar to User Access (MAC filtering) except that the Router uses the local IP address to filter the specific data from the specified network protocol. For example, if you chose to block TCP data packets from a specific computer, you would need to figure out what that device's IP address is and select TCP from the Protocol drop down menu.
TAP-R3 USER’S GUIDE USB STORAGE USB Storage: Local Sharing Share a USB storage device with computers on the local network of the Router. Insert a USB storage device, such as a flash drive or external hard drive, to the USB port on the back of the Router and follow the directions below for your operating system. The computer must be connected to the router to access the storage device. You may also want to Map the Network Drive so it shows up as a standard drive on your computer for easier access.
TAP-R3 USER’S GUIDE Windows 7 and Vista To access the drive from your Windows desktop: Note: If the USB drive does not appear automatically under your Networked devices (Windows 7, Vista or Mac OS X), you will need to Map the Network Drive. a) Click the Start button. b) Click Computer. c) On the Computer page, the drive should appear on the left hand column under Network as AMPED_USB. To Map the Network Drive: a) b) c) d) e) Click the Start button. Click Computer. Click Map Network Drive from the top bar.
TAP-R3 USER’S GUIDE Windows XP To access the drive from your Windows desktop: Note: If the USB drive does not appear automatically under your Networked devices (Windows 7, Vista or Mac OS X), you will need to Map the Network Drive. a) Click the Start button. b) Click My Computer. c) Click on My Network Places and locate the drive named AMPED_USB. To Map the network drive: a) Click the Start button. b) Right Click My Computer and select Map Network Drive.
TAP-R3 USER’S GUIDE Mac OS X To access the drive from your Mac desktop: Note: If the USB drive does not appear automatically under your Networked devices, you will need to Map your Network Drive (Instructions below). a) Open Finder. b) On the left hand menu, under Shared, click AMPED_USB. To Map the network drive: a) b) c) d) e) Open Finder. From the menu on the top of the desktop, select Go. Select Connect To Server from the drop down menu.
TAP-R3 USER’S GUIDE USB Storage: FTP Server Share a USB storage device with computers remotely over the Internet. A FTP server allows you to access files through the use of an FTP client remotely over the Internet. Insert a USB storage device, such as a flash drive or external hard drive, to the USB port on the back of the Router. a) From the USB Storage/FTP Server page of the web menu, enter a FTP server name. b) Select whether you wish to have an open or secured access to your FTP server.
TAP-R3 USER’S GUIDE FIREWALL SETTINGS The Router’s Firewall is designed to prevent unauthorized users from accessing your network. This section will go over the different features of the Firewall and how to configure them.
TAP-R3 USER’S GUIDE Firewall Settings: Port Filtering Port Filtering is a security measure that prevents users from using specific ports for reasons other than what those ports were originally intended for. For example, TCP port 21 is traditionally used for FTP. However, there is nothing stopping a user from using port 21 for purposes other than FTP access. By enabling Port Filtering on TCP port 21, only FTP communications would be allowed. No other types of communication would be allowed on this port.
TAP-R3 USER’S GUIDE Firewall Settings: Port Forwarding Port Forwarding is a rule that tells the Router that if a specific type of request comes in on a specific port, then that request should be forwarded to a specific device on the private network. Port Forwarding is often used for setting up servers, cameras and other devices that require remote access. Enable Port Forwarding: Enables designated ports to begin forwarding.
TAP-R3 USER’S GUIDE Firewall Settings: DMZ (Demilitarized Zone) A DMZ is a network location or IP Address that is not protected by the firewall. When enabling DMZ, it is important to note that the device on the IP Address designated as part of the DMZ does not have any protection from the Router’s firewall. The device’s only security would be those built into the operating system. As a general safety rule, devices placed on the DMZ should not have any other network connections to any other devices.
TAP-R3 USER’S GUIDE Firewall Settings: Virtual LAN A VLAN has the same attributes as a physical local area network (LAN) but it allows for devices to be grouped together even if they are not located on the same physical network switch. The benefit of a VLAN is that it allows network traffic to flow more efficiently for computers or network devices that are within sections of mutual interest.
TAP-R3 USER’S GUIDE Firewall Settings: Denial of Service A Denial of Service attack is an attempt by a user (or users) to make a server’s or network’s services unavailable. The user sends a server multiple requests with false return addresses. The server will attempt to respond by sending a request back to the user; however, since the address is false, the server will wait for a response before closing the connection.
TAP-R3 USER’S GUIDE QUALITY OF SERVICE QoS prioritizes and guarantees network performance for a specific IP Address range or MAC Address. QoS is often used for applications that require steady bandwidth. Common applications include VoIP phones, video streaming applications (i.e. DVRs, network cameras, video on demand), online gaming and servers.
TAP-R3 USER’S GUIDE ROUTING SETUP Dynamic Routing allows the Router to automtically learn network destinations for devices/networks that are directly connected to the router. RIP and RIP2 are routing protocols that may be used for the router to learn routes from other routers running those same protocols. This allows the Router to adapt to changes and failures within the network topology and find the best route. Static Routing allows the administrator to manually enter into the Router’s routing table.
TAP-R3 USER’S GUIDE MANAGEMENT FEATURES The Management Features on the Router allows you to view the status of the system, your Internet connection, wireless network and local area network. The Network Statistics page provides detailed traffic data for each connection type.
TAP-R3 USER’S GUIDE Management: System Status The System Status provides you with a snapshot of your Router’s current connections and settings. The System Information section provides you with the router’s firmware version and build. This is used to help our support department determine what firmware version your device is running. The Current Date / Time is the setting for the system clock. If this time is off, go to the System Clock section and configure your system time.
TAP-R3 USER’S GUIDE Management: Network Statistics Network statistics shows the data activity for each connection type on the Router (Internet, Wireless and Wired). The Wireless Connection statistics shows all data activity for both the 2.4GHz and 5.0GHz wireless networks separately. The Wired Connection statistics shows all data activity for all users physically connected to the wired ports on the Router.
TAP-R3 USER’S GUIDE Management: Dynamic DNS Settings The Dynamic Domain Name System (DDNS) is a method to keep a web domain name, or web address, linked to a changing IP address as most Internet Providers do not provide static IP addresses. To use DDNS, you must first set up an account with a DDNS provider. The Router supports two of these providers (TZO and DynDNS).
TAP-R3 USER’S GUIDE Management: System Clock Maintain the internal clock for the Router by syncing with your computer’s time or over the Internet. Your system clock settings need to be accurate in order for logs and wireless access schedules to work correctly.
TAP-R3 USER’S GUIDE Management: System Logs The System Log is useful for viewing the activity and history of your Router. The System Log is also used by Amped Wireless technicians to help troubleshoot your router when needed. It is recommended that you enable all logs in the event that troubleshooting is required. All log entries will be deleted each time the Router reboots or is powered off.
TAP-R3 USER’S GUIDE Management: Upgrade Firmware Amped Wireless continuously updates the firmware for all products in an effort to constantly improve our products and their user experiences. When connected to an active connection with Internet access, the Router can automatically check for new firmware updates that are available by pressing Check Now. Follow the prompts to complete the upgrade process.
TAP-R3 USER’S GUIDE Inside the file will be a text document with details on the current firmware release and instructions on how to upgrade the firmware. To manually upgrade your firmware: Download the file from www.ampedwireless.com/support and remember the location where you saved it. Firmware files may also be provided by Amped Wireless Elite Support Concierges. b) Click Choose File and locate the file. c) Click Upload to begin upgrading. a) Note: Firmware files normally have a .bin file extension.
TAP-R3 USER’S GUIDE Management: Save and Reload Settings Saving your current settings allows you to back-up your current settings which may be reloaded at a later time. This feature may be useful for testing new features and settings without having to worry about returning to a stable platform. To save current settings: a) Click Save. b) Select a file name and location. To load previously saved settings: a) Click Browse. b) Locate the previously saved settings file.
TAP-R3 USER’S GUIDE Management: Password Settings If you wish to enable a password to protect unauthorized access to the web menu and Setup Wizard, you may enter one here.
TAP-R3 USER’S GUIDE TECHNICAL SPECIFICATIONS Wireless Standard: 802.11a/b/g/n/ac Frequency Band: 2.4 GHz, 5.0GHz Wireless Speed: 2.4GHz: 450Mbps (Tx/Rx) 5.0GHz: 1300Mbps (Tx/Rx) Amplifier: 3 x 2.4GHz Amplifiers 3 x 5.
TAP-R3 USER’S GUIDE DEFAULT SETTINGS The default settings for your Router are listed here. If for some reason you need to return your Router back to default settings, hold down the Reset button on the back of the Router for 10 seconds. The Router will reset back to factory settings as listed below: IP Address: 192.168.3.1 Web Menu Access: http://setup.ampedwireless.com 2.4GHz Wireless SSID: Amped_TAPR3_2.4 Wireless Security Key (WPA/WPA2 Mixed Mode): wireless 5.0GHz Wireless SSID: Amped_TAPR3_5.
TAP-R3 USER’S GUIDE TROUBLESHOOTING & SUPPORT INFORMATION We are here to help. If you have any issues with your Router please contact us. To contact Amped Wireless’ Technical Support use one of the following methods: Phone: 888-573-8820 Email: techsupport@ampedwireless.com Web: www.ampedwireless.
TAP-R3 USER’S GUIDE Troubleshooting The tips in this guide are listed in order of relevance. Try solution (a) before trying solution (b), etc. Troubleshooting: Touch Screen Issues The Touch Screen Menu will not turn on. a. b. Check that the Power Adapter is securely fastened to the PWR port on the back of the Router and that the Power Adapter is plugged into an active power outlet. Check that the Power Switch on the side panel of the Router is toggled to the ON position.
TAP-R3 USER’S GUIDE The touch screen turns off too quickly. a. From the Dashboard screen, tap on Settings. Tap on Management Settings and then Screen Settings. This screen will allow you to adjust the timeout time for the screen to turn off when there is an interval of no activity.
TAP-R3 USER’S GUIDE Troubleshooting: Web Menu Issues I entered setup.ampedwireless.com and it failed to open the Setup Wizard. a) Make sure your computer is connected to the Router using the included Ethernet cable. Do not try to connect with a wireless connection. Ensure that the power on the Router is on. b) Check that your computer IS NOT connected to any wireless networks. If it is, disable your Wi-Fi connection and disconnect from all wireless networks. Reboot the router and try again.
TAP-R3 USER’S GUIDE I entered setup.ampedwireless.com and it failed to open the Web Menu Dashboard. a) Make sure your computer is connected to the Router using the included Ethernet cable. Do not try to connect with a wireless connection. Ensure that the power on the Router is on. b) Check that your computer IS NOT connected to any wireless networks. If it is, disable your Wi-Fi connection and disconnect from all wireless networks. Reboot the router and try again.
TAP-R3 USER’S GUIDE I have entered setup.ampedwiress.com but I cannot enter the Web Menu. I am prompted for a login and password but it does not let me continue. a) Check that you are using the right login and password. b) If you forgot your login and password for the Web Menu, reset the Router to default settings and try again. To reset the Router to default: On the back panel of the router find the Reset button. Use a pen tip to hold down the reset button for 5 to 10 seconds.
TAP-R3 USER’S GUIDE Troubleshooting: Internet Connection Issues The Basic Setup Wizard could not automatically configure my Internet connection. a) Reset your modem by holding down the reset button located on the back of the modem for approximately five seconds. Try the automatic configuration again. b) Static IP: Your Internet connection may require a static IP setting. Check with your ISP to obtain the IP settings. c) DSL Connections: Your Internet connection may require login information.
TAP-R3 USER’S GUIDE I have gone through the Setup Wizard and I do not have Internet. a) Detach the power adapter and disconnect all computers from the Router. Turn off the power to your modem and remove the backup battery (if available). Wait 2 minutes and power the modem back on. Wait 2 minutes for the modem to initialize. Power on the Router and connect your computer to the router. Open your web browser and try to access the Internet. b) Check that your Internet connection through the modem is working.
TAP-R3 USER’S GUIDE My Internet connection is unstable and drops intermittently. a) Power off your computer, the Router and your modem. Power on your modem and wait 2 minutes. Power on the Router and wait 1 minute for the router to initialize. Power on your computer and try again. b) Check to see if other computers are also having this problem. If they are not, check to see if your antivirus software or firewall software is conflicting with your Internet connection.
TAP-R3 USER’S GUIDE My Internet connection is abnormally slow. a) Check with your Internet provider to ensure that they are not experiencing system wide issues. b) Check with speedtest.net to see the speed of your Internet provider. Connect directly to your modem with your computer and check speedtest.net again. If the speed results are the same, the issue is with your Internet provider. Please contact your provider to troubleshoot the issue.
TAP-R3 USER’S GUIDE Troubleshooting: Local Network Issues My computer is getting an IP address of 169.254.x.x and Windows says “Limited or no Connectivity”. a) Make sure the Router is powered on. b) Check that your computer’s network adapter is enabled and is set to “Obtain IP Address Automatically”. c) Release and Renew your IP Address on your computer. To do this on a Windows computer: Click Start > Run and type CMD. When the command prompt appears, type ipconfig /release and press enter.
TAP-R3 USER’S GUIDE Troubleshooting: Wireless Issues I am only getting 3 or 4 wireless signal bars on my wireless computer and I am within 10 feet of the wireless router. a) Step back at least 10 feet from the Router and check your signal again. The Router emits high power, long range Wi-Fi signals that may confuse your wireless adapter signal reading at close range. The speed and signal are at 100%, however your readout may not be displaying the data correctly.
TAP-R3 USER’S GUIDE My wireless adapter does not connect at the maximum wireless speed. a) Your wireless network adapter may be outdated and have older wireless technology not capable of achieving the wireless network speeds of the Router. To achieve maximum wireless speeds, it is required that you have a 802.11n (2.4GHz) or 802.11ac (5.0GHz) adapter. b) Check that you are using the latest Wi-Fi security type: WPA or WPA2 WEP security may slow down your wireless speeds.
TAP-R3 USER’S GUIDE I cannot connect my Windows Vista computer to the wireless network. I enter my wireless password and I see an error. a) Manually add a wireless network to your Vista computer: Click Start, and then click Network. Select Network and Sharing Center. Click Manage Wireless Networks. Click Add and select Manually create a network profile. Type in the SSID, and select the type of security and enter your security key. Select “Start this connection Automatically” and click Next.
TAP-R3 USER’S GUIDE I cannot connect my Windows XP computer to the wireless network. I enter my wireless password and I see an error. a) Make sure your computer has the latest Windows Service Pack. Windows Service Pack 1 does not support WPA security. Upgrade to the latest Service Pack to support the latest wireless encryption. b) Manually add a wireless network to your XP computer. c) Disable IEEE 802.1x authentication.
TAP-R3 USER’S GUIDE Troubleshooting: USB Storage Issues I cannot access my USB storage device after I plug it into the router. Follow the instructions below for your operating system. Windows 7 and Vista To access the drive from your Windows desktop: Note: If the USB drive does not appear automatically under your Networked devices (Windows 7, Vista or Mac OS X), you will need to Map the Network Drive. a) Click the Start button. b) Click Computer.
TAP-R3 USER’S GUIDE Windows XP To access the drive from your Windows desktop: Note: If the USB drive does not appear automatically under your Networked devices (Windows 7, Vista or Mac OS X), you will need to Map the Network Drive. a) Click the Start button. b) Click My Computer. c) Click on My Network Places and locate the drive named Amped_USB. To Map the network drive: a) Click the Start button. b) Right Click My Computer and select Map Network Drive.
TAP-R3 USER’S GUIDE To Map the network drive: a) Open Finder. b) From the menu on the top of the desktop, select Go. c) Select Connect To Server from the drop down menu. d) Enter the address of the network drive: Amped_USB or shared disk IP address, then click Connect I cannot access my USB storage device remotely. a) Insert a USB storage device, such as a flash drive or external hard drive, to the USB port on the back of the Router.
TAP-R3 USER’S GUIDE The Router freezes or I cannot access the web when a USB storage device is connected. a) Remove the USB storage device from the Router and reboot it by unplugging the power adapter. Once rebooted, try inserting the USB storage device again. b) Make sure your UBS storage device is not corrupted and is working properly and try again. Additional USB Storage troubleshooting tips may be available online at the Amped Wireless Elite Support Center.
TAP-R3 USER’S GUIDE WARRANTY & REGULATORY INFORMATION The Amped Wireless (A division of Newo Corporation, Inc.) Limited Warranty Warranty Period: The Amped Wireless Limited Warranty is for one (1) year from the date of purchase for new products. Refurbished products carry the Limited Warranty for thirty (30) days after the date of purchase.
TAP-R3 USER’S GUIDE Limitations: IN NO EVENT SHALL AMPED WIRELESS’ (NEWO CORPORATION’S) LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, ACCESSORIES OR ITS DOCUMENTATION.
TAP-R3 USER’S GUIDE discretion of Amped Wireless and determined based on the details of each RMA case. Customers outside of the United States of America are responsible for all shipping and handling costs including custom duties, taxes and all other related charges. Technical Support: The Amped Wireless Limited Warranty is not related to the terms, conditions and policies of Amped Wireless Elite Support offerings. For questions regarding support, please contact techsupport@ampedwireless.
TAP-R3 USER’S GUIDE Regulatory Information FCC Statement and Declaration: Amped Wireless declares that this device complies with Part 15 of the FCC Rules and Regulations. Operation of this device is subject to the following two (2) conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
TAP-R3 USER’S GUIDE - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device is restricted for indoor use.
TAP-R3 USER’S GUIDE The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada Statement: This Class B digital apparatus complies with RSS-210 and ICES-003 of the Industry Canada Rules.
TAP-R3 USER’S GUIDE This radio transmitter (TAP-R3) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Antenna Gain Ant. Brand Model Name Antenna Type Connector 5GHz 3.48 3.49 Master Wave Technology Co., Litd. 98619PRSX009 2 INPAQ Technology Co.
TAP-R3 USER’S GUIDE For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Déclaration d’Industrie Canada : Cet appareil numérique de classe B est conforme aux réglementations RSS210 et ICES-003 d’Industrie Canada.
TAP-R3 USER’S GUIDE cette liste, et dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas. Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent être exploités.
TAP-R3 USER’S GUIDE LEGAL NOTICES AND DISCLAIMERS Copyright Information and Trademark Usage Guidelines © 2014 Amped Wireless / Newo Corporation. All rights reserved. Amped Wireless, Newo Corporation, and the Amped Wireless logo are registered trademarks or trademarks of Newo Corporation. All non-Amped Wireless trademarks, logos, brands and products are trademarks or registered trademarks of their respective owners. Amped Wireless does not claim any relation.
TAP-R3 USER’S GUIDE purposes is strictly prohibited. The Amped Wireless logo requires permission for use. For use of the Amped Wireless logo, please email legal@ampedwireless.com. Use of Amped Wireless' trademarks requires the use of the proper trademark symbol in all usage cases. The guidelines for trademark usage apply to all Amped Wireless customers, employees, vendors, consultants, licensees and any other third party.
TAP-R3 USER’S GUIDE damage to data arising out of the use or inability to use any Amped Wireless product, damages resulting from use of or reliance on information present, even with prior notice to Amped Wireless. All non-Amped Wireless trademarks, logos, brands and products are trademarks or registered trademarks of their respective owners. Amped Wireless does not claim any relation.
TAP-R3 USER’S GUIDE Software Licenses / Disclaimers This product contains Software (including firmware), licensed to you, the purchaser, by Amped Wireless. This also includes Software downloaded from an authorized website, such as www.ampedwireless.com or from an authorized application market such as Google Play or Apple’s App Store. This license allows you to operate the Software in the manner described in the user’s manual for the purchased product.
TAP-R3 USER’S GUIDE IT IS YOUR RESPONSIBILITY TO BACK UP YOUR SYSTEM INCLUDING, WITHOUT LIMITATION, ANY DATA THAT YOU MAY USE OR POSSESS IN CONNECTION WITH THE PRODUCT. ANY MATERIAL, INFORMATION OR DATA DOWNLOADED OR OTHERWISE OBTAINED IS ACCESSED AT YOUR OWN DISCRETION AND RISK, AND YOU WILL BE RESPONSIBLE FOR ANY DAMAGE TO YOUR COMPUTER SYSTEM OR PRODUCT, OR LOSS OF DATA THAT RESULTS FROM THE DOWNLOAD OF SUCH MATERIAL, INFORMATION OR DATA.
TAP-R3 USER’S GUIDE Dispute Resolution / Arbitration This section describes how you agree to resolve any disputes with Amped Wireless regarding these Terms of Use or your purchase of any product from Amped Wireless and your use of that product. You and Amped Wireless agree to the following resolution process.
TAP-R3 USER’S GUIDE It is important that you understand that the arbitrator’s decision will be binding and may be entered as a judgment in any court of competent jurisdiction. If the arbitrator rules against Amped Wireless, in addition to accepting whatever responsibility is ordered by the arbitrator, we will reimburse your reasonable attorneys' fees and costs. It's important to us that we address any issues you might have promptly.
TAP-R3 USER’S GUIDE As an exception to this arbitration agreement, Amped Wireless is happy to give you the right to pursue in small claims court any claim that is within that court's jurisdiction as long as you proceed only on an individual basis. We would hope that our customer service agents could resolve any disputes you have with us without resorting to arbitration. Before initiating any arbitration proceeding, you agree to first discuss the matter informally with Amped Wireless for at least 30 days.
TAP-R3 USER’S GUIDE Mailing Address Only Amped Wireless 13089 Peyton Dr. #C307 Chino Hills, CA 91709 Email: legal@ampedwireless.
tech support e-mail web 888-573-8820 techsupport@ampedwireless.com www.ampedwireless.com Amped Wireless A Division of Newo Corporation Copyright © 2015 Amped Wireless / Newo Corporation. All rights reserved. Amped Wireless, Newo Corporation, and the Amped Wireless Logo are registered trademarks or trademarks of Newo Corporation.
