SVT-112AV & SVT-212AV Speaker Cabinets Owner’s Manual
SVT-112AV / SVT-212AV Speaker Cabinet Important Safety Instructions 1. Read, follow, and keep these instructions. Heed all warnings. 2. This speaker is capable of producing high sound pressure levels that may cause permanent hearing damage. User caution is advised and ear protection is recommended during use. 3. This speaker is designed for use on a sturdy, level surface. Whenever stacking speaker cabinets, do not stack more than two high. 4.
SVT-112AV / SVT-212AV Speaker Cabinet Rear Panel Connector Plate SVT-112AV SVT-212AV SVT-112AV IMPEDANCE: 8 OHMS POWER: 300W RMS SVT-212AV HIGH FREQUENCY ATTENUATOR OFF –6 0 2 1. IMPEDANCE: 4 OHMS POWER: 600W RMS FULL RANGE INPUTS HIGH FREQUENCY ATTENUATOR OFF 1 –6 0 FULL RANGE INPUTS 2 1 1/4" TS Full Range Input / Output Jacks: The jackplate features two 1/4" jacks wired in parallel, allowing easy daisy-chaining from one speaker to another.
SVT-112AV / SVT-212AV Speaker Cabinet TECHNICAL SPECIFICATIONS Frequency Response (+/–3 dB) 70 Hz – 18 kHz [SVT-112AV] 71 Hz – 18 kHz [SVT-212AV] Usable Low Frequency (–10 dB) 35 Hz [SVT-112AV] 40 Hz [SVT-212AV] Impedance 8 ohms [SVT-112AV] 4 ohms [SVT-212AV] Power Rating 300W rms [SVT-112AV] 600W rms [SVT-212AV] Sensitivity 96 dB SPL 1w/1m [SVT-112AV] 99 dB SPL 1w/1m [SVT-212AV] Maximum SPL 121 dB SPL [SVT-112AV] 127 dB SPL [SVT-212AV] Cabinet Construction Rugged 15 mm poplar ply enclosure
