User Manual

SVT-112AV / SVT-212AV Speaker Cabinet
3
12" EMINENCE
8 OHM SPEAKERS
TWO
PARALLEL
JACKS
COMPRESSION
DRIVER
CROSS
OVER
12" EMINENCE
8 OHM SPEAKER
TWO
PARALLEL
JACKS
COMPRESSION
DRIVER
CROSS
OVER
Rear Panel Connector Plate
System Block Diagrams
1. 1/4" TS Full Range Input / Output Jacks: The jackplate features two 1/4" jacks wired
in parallel, allowing easy daisy-chaining from one speaker to another. Each of the jacks
may be used as an input or a through connection.
Connect the speaker-level output of your amplifier to the cabinet’s input jack using a good
quality(non-shielded)speakercable.Never use (shielded) instrument cable to connect
speakers to an amplifier.
You can utilize the unused jack as an output/through jack to connect a second speaker
cabinet in parallel.
2. High Frequency Horn Level Switch: The three-position HF Horn switch allows for:
 •Fullhighfrequencyoutput(0setting)
 •Highfrequenciesreducedby6dB(–6setting)
 •Hornshutoff(offsetting)
SVT-112AV SVT-212AV
SVT-212AVSVT-112AV
HIGH
FREQUENCY
ATTENUATOR
FULL RANGE
INPUTS
OFF
–6
0
IMPEDANCE: 4 OHMS
POWER: 600W RMS
SVT-212AV
HIGH
FREQUENCY
ATTENUATOR
FULL RANGE
INPUTS
OFF
–6
0
IMPEDANCE: 8 OHMS
POWER: 300W RMS
SVT-112AV
2 2 11