User Manual

ManualsBrandsAmpeg ManualsBassBA115 - COMBO AMPLIFIER FOR LOW 100 WATT

BA115

BASS AMPLIFIER

Owner’s Manual

Summary of content (4 pages)

PAGE 1
BA115 BASS AMPLIFIER Owner’s Manual
PAGE 2
BA115 BASS AMPLIFIER TOP PANEL: ON 0dB -15dB INPUT 1 2 1 2 3 4 5 GAIN MASTER STYLE TREBLE ULTRA MID BASS CD INPUT HEADPHONES LINE OUT 3 4 5 6 7 8 9 10 11 1. 0dB INPUT: Connect your “passive” bass guitar here using a shielded instrument cable. This input is not padded and is best suited for basses without active electronics or “hot” pickups. 2. -15dB INPUT: Connect your “active” bass here using a shielded instrument cable.
PAGE 3
BA115 BASS AMPLIFIER IMPORTANT SAFEGUARDS AND PRECAUTIONS: All Ampeg products are designed for continuous safe operation. Abiding by the following rules can help prevent damage to your amplifier, yourself and others. • The amplifier is equipped with a three-pronged AC power cord. To reduce the risk of electrical shock, NEVER remove or otherwise attempt to defeat the ground pin of the power cord. • Connect the amplifier ONLY to a properly grounded AC outlet of the proper voltage for your amp.
PAGE 4
BA115 BASS AMPLIFIER TECHNICAL SPECIFICATIONS: OUTPUT POWER RATING MAX INPUT LEVELS 100 Watts at 4 ohms 0dB Input: 1.75V RMS -15dB Input: 9.75V RMS CD Input: 5V RMS 120mV RMS 3.75V RMS 39dB 1 = -25dB @500Hz 2 = -12dB @500Hz 3 = flat 4 = +5dB @2kHz and above 5 = -6dB @50Hz and below 40dB range @10kHz 30dB range @500Hz 36dB range @50Hz 15”, 150 w, 4 ohm, 2.5” voice coil dia., 56 oz. magnet; Piezo tweeter 120VAC, 60Hz, 70VA 100/115VAC, 50/60Hz, 70VA 230VAC, 50/60Hz, 70VA 21” W x 21” H x 15-1/2” D; 62 lbs.