BA-112 BASS AMPLIFIER Owner’s Manual
BA-112 BASS AMPLIFIER TOP PANEL: ON 0dB -15dB INPUT 1 2 1 2 3 4 5 VOLUME STYLE TREBLE ULTRA MID BASS CD INPUT LINE OUT 3 4 5 6 7 8 9 1. 0dB INPUT: Connect your “passive” bass guitar here using a shielded instrument cable. This input is not padded and is best suited for basses without active electronics or “hot” pickups. 2. -15dB INPUT: Connect your “active” bass here using a shielded instrument cable.
BA-112 BASS AMPLIFIER IMPORTANT SAFEGUARDS AND PRECAUTIONS: All Ampeg products are designed for continuous safe operation, as long as common sense is used and steps are taken to help avoid certain problems. Abiding by the following rules can help prevent damage to your amplifier, yourself and others. • The amplifier is equipped with a three-pronged AC power cord. To reduce the risk of electrical shock, NEVER remove or otherwise attempt to defeat the ground pin of the power cord.
BA-112 BASS AMPLIFIER TECHNICAL SPECIFICATIONS: OUTPUT POWER RATING MAX INPUT LEVELS LINE OUT LEVEL HEADPHONE OUT LEVEL GAIN STYLE TREBLE ULTRA MID BASS SPEAKER SPECS POWER REQUIREMENTS SIZE AND WEIGHT 50 Watts at 8 ohms 0dB Input: 800mV RMS -15dB Input: 4.62V RMS CD Input: 3.5V RMS 1.75V RMS 2.75V RMS 40dB 1 = -25dB @500Hz 2 = -12dB @500Hz 3 = flat 4 = +5dB @2kHz and above 5 = -6dB @50Hz and below 36dB range @10kHz 30dB range @500Hz 36dB range @50Hz 12”, 50 w, 8 ohm, 1.5” voice coil dia., 30 oz.
