Bassamp Cube Owner's Manual

ManualsBrandsAmpeg ManualsMusical Instrument AmplifierBA-210SP

BA-210SP

Bassamp Cube

with

Digital Effects

Summary of content (8 pages)

PAGE 1
BA-210SP Bassamp Cube with Digital Effects
PAGE 2
BA-210SP Bassamp Cube with Digital Effects TABLE OF CONTENTS: Important Safeguards and Precautions . . . . . . . . . . . . . . . . . . . . .3 The Top Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4,5 The Digital Effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Programming the Footswitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 System Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
BA-210SP Bassamp Cube with Digital Effects IMPORTANT SAFEGUARDS AND PRECAUTIONS: All Ampeg products are designed for continuous safe operation. Abiding by the following rules can help prevent damage to your amplifier, yourself and others. • The amplifier is equipped with a three-pronged AC power cord. To reduce the risk of electrical shock, NEVER remove or otherwise attempt to defeat the ground pin of the power cord.
PAGE 4
BA-210SP Bassamp Cube with Digital Effects THE TOP PANEL: 1. 0dB INPUT: Connect your “passive” bass guitar here using a shielded instrument cable. This input is not padded and is best suited for basses without active electronics. 2. -15dB INPUT: Connect your “active” bass here using a shielded instrument cable. This input is padded 15dB and is best suited for basses with active electronics and/or “hot” pickups. 3.
PAGE 5
BA-210SP Bassamp Cube with Digital Effects 11. EFFECTS LEVEL: Use this control to adjust the level of the selected digital effect. 12. CD INPUT: Use these RCA jacks to connect the line level (or headphones) output of a CD player, tape deck or rhythm machine to the amplifier. The inputs to these jacks are summed into a mono signal which is fed into the BA210SP’s power amplifier. The signal level from these jacks is adjusted by the amplifier’s Level control (#8).
PAGE 6
BA-210SP Bassamp Cube with Digital Effects THE DIGITAL EFFECTS: The BA-210SP features 15 built-in digital effects designed especially for the bass. Use the Effects Select control to choose one of these effects. The numbers that circumscribe the control correspond to the “effects menu” below (and to the chart on the back of the amplifier). Each effect has a parameter which can be modified using the Adjust control. Use the Level control to mix in the desired amount of effect.
PAGE 7
BA-210SP Bassamp Cube with Digital Effects PROGRAMMING THE FOOTSWITCH: The BA-210SP allows you to save four DSP settings by means of the two button footswitch supplied with the amplifier.
PAGE 8
BA-210SP Bassamp Cube with Digital Effects TECHNICAL SPECIFICATIONS: OUTPUT POWER RATING MAX INPUT LEVELS LINE OUT LEVEL HEADPHONE OUT LEVEL GAIN STYLE LOW MID HIGH SPEAKER SPECS POWER REQUIREMENTS SIZE AND WEIGHT 220 Watts at 4 ohms @5% THD 0dB Input: 2.00V RMS -15dB Input: 8.00V RMS CD Input: 7.75V RMS 1.