Operation Manual

BA115HP/BA210 Bassamp Cube

IMPORTANT SAFEGUARDS AND PRECAUTIONS:

All Ampeg products are designed for continuous safe operation, as long as common sense

is used and steps are taken to help avoid certain problems. Abiding by the following rules

can help prevent damage to your amplifier, yourself and others.

• The amplifier is equipped with a three-pronged AC power cord. To reduce the risk of

electrical shock, NEVER remove or otherwise attempt to defeat the ground pin of the

power cord.

• Connect the amplifier ONLY to a properly grounded AC outlet of the proper voltage

for your amp.

• Avoid sudden temperature extremes, rain and moisture. Also, avoid sudden and

intense impact. (If the unit has been subjected to any of the preceding abuses, have

it looked at by an authorized service center.)

• NEVER set the amplifier on a support that might give out under its weight.

• Always keep the total speaker impedance at or above the rated load.

• Unplug the amplifier before cleaning it. NEVER spray liquid cleaners onto the ampli-

fier. Wipe it with a slightly dampened, lint-free cloth to remove dirt and film.

• Do not use the amplifier if it has sustained damage to the chassis, controls, or power

cord. Refer the unit to an authorized service center for inspection.

• Amplifiers capable of producing high volume levels are also capable of inflicting per-

manent hearing loss or damage, if the exposure to such levels is prolonged. Such

damage is progressive and irreversible!