PF-350, PF-500, PF-800 Quick Start Guide
What’s in the Box PF-350, PF-500, or PF-800 Amplifier, Power Cable, Quick Start Guide.
Front & Rear Panels PF 350 -15dB limit peak 0 10 input pad gain 1 2 3 0 10 0 bass 10 0 midrange 10 treble 0 audio in phones 8 9 10 volume limiter 5 6 4 3 fault 7 7 12 mute peak mute PF 500 PF 800 1 2 3 4 5 ultra hi fault thresh 0 10 input -15dB compression 1 2 10 0 gain 3 10 ultra lo 0 bass 10 0 10 midrange frequency 0 treble 10 0 4 11 10 fx mix 0 ft switch PF 500 PF 800 phones 10 volume 13 16 audio in 5 18 pwr amp in pre am
Front & Rear Panel Descriptions 1. 1/4" Input: Connect a passive or active instrument to the Input jack. 2. Pad/Mute: Pad reduces input volume by 15 dB. Mute will mute the signal completely. 3. Gain/Peak LED: The Gain knob adjusts the signal sent to the preamplifier. The Peak LED indicates when the input signal is too high. 4. EQ Knobs: Boost or cut the level at certain frequencies to enhance the sound. 5. Volume: Adjusts the output level to Speaker Outputs and the preamp level sent to the Phones output. 6.
Technical Specifications PF-350 Output Power Rating 250W RMS @ 8 350W RMS @ 4 Maximum Gain Power Requirements PF-500 (5% THD) (5% THD) 300W RMS @ 8 500W RMS @ 4 64 dB PF-800 (3% THD) (3% THD) 69 dB 400W RMS @ 8 800W RMS @ 4 (3% THD) (3% THD) 71 dB ~100-120V AC, 50-60 Hz, 100W ~100-120V AC, 50-60 Hz, 125W ~100-120V AC, 50-60 Hz, 200W ~200-240V AC, 50-60 Hz, 100W ~200-240V AC, 50-60 Hz, 125W ~200-240V AC, 50-60 Hz, 200W Size (H x W x D) 2.7 x 10.8 x 10.7 in 69 x 275 x 272 mm 3.1 x 14.
Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information Unique Identifier: Ampeg PF-350, PF-500, and PF-800 Responsible Party - U.S. Contact Information: Yamaha Guitar Group, Inc. 26580 Agoura Road Calabasas, CA 91302-1921 (818) 575-3600 https://ampeg.com/ FCC Compliance Statement: This device complies with Part 15 of the FCC Rules.
