SVT 210AV Speaker Cabinet Owner’s Manual
SVT 210AV Speaker Cabinet Important Safety Instructions 1. Read, follow, and keep these instructions. Heed all warnings. 2. This speaker is capable of producing high sound pressure levels that may cause permanent hearing damage. User caution is advised and ear protection is recommended during use. 3. This speaker is designed for use on a sturdy, level surface. Whenever stacking speaker cabinets, do not stack more than two high. 4.
SVT 210AV Speaker Cabinet System Block Diagram 10" EMINENCE 4 OHM SPEAKERS – – + + TWO PARALLEL JACKS Rear Panel Connector Plate 1 1. 1/4" TS Input and Output Jacks: Connect the speaker-level output of your amplifier (rated up to 200W into 8 ohms) to the input jack using good quality (non-shielded) speaker cable. Never use (shielded) instrument cable to connect speakers to an amplifier. You can use the output jack to connect a second speaker cabinet in parallel.
SVT 210AV Speaker Cabinet SVT 210AV TECHNICAL SPECIFICATIONS Impedance 8 ohms Power Rating 200 W RMS Cabinet Construction Birch plywood Speaker Specs Eminence Speakers 2 x 10" Inputs 2 x 1/4" parallel jacks Size (H x W x D) 25.2 in/640 mm (including feet and handle) x 13.0 in/330 mm x 11.0 in/280 mm Weight 26.3 lb/11.9 kg The SVT 210AV cabinet is covered with a durable fabric-backed vinyl material. Clean with a dry lintfree cloth.
