User Guide

Ampex 1308904-X4 Preliminary Draft A-3
ACL Application Programmer’s Guide Error/Event Parameter Identification Codes
27h
Assigning tape cartridge to empty
storage bin
Bin number
28h Loading tape cartridge to default drive Drive number
29h Self injecting unload command N/A
2Ah Mode select software error N/A
2Bh Mode select data error N/A
2Ch CHS mode set to manual N/A
2Dh CHS mode set to sequential loop N/A
2Eh Bar code task PSOS queue error Error number
2Fh Bar code task could not initialize timer N/A
30h Bar code command timeout N/A
31h Request sense data
1
st
= sense key
2
nd
= ASC value
3
rd
= ASCQ value
32h
Panic disconnect to kernel process
(SCSI)
N/A
33h
SCSI Attention request in kernel
process
N/A
34h CHS control machine entered idle state N/A
35h CHS control machine auditing bin N/A
36h
Initialize Element Range SCSI
command
1
st
= number or elements
2
nd
= address of first element
37h
Initialize Element Status SCSI
command
N/A
38h CHS mode set to sequential non-loop N/A
39h SCSI command failure SCSI status code
3Ah CHS tally data not being updated N/A
3Bh New CHS status from tally SCSI status code
3Ch DST ACL model is neither 410 nor 810 N/A
3Dh New cartridge in IMEX slot N/A
3Eh
Tape drive task could not initialize
timer
N/A
Table A-1. Error/Event Parameter Identification Code Descriptions (Continued)
Code Description Integer Interpretation