User Guide

A-10 Preliminary Draft Ampex 1308904-X4
Model No.
Running Head
Vendor-Specific ACL Condition Codes ACL Application Programmer’s Guide
05h 21h 01h 35h
Illegal Request
Invalid Transport Element Address.
The move command cannot be
completed with the transport
element address supplied in the
SCSI command.
Read Element Status and verify
that the addresses are valid and the
move is permitted.
05h 21h 01h 36h
Illegal Request
Cartridge Movement Specified by
SCSI Command is Not Allowed
The move you specified is not
permitted.
Read Element Status to determine
the Move functions permitted.
05h 24h 00h 28h
Illegal Request
Invalid Field in SCSI Command
Descriptor Block
A field in the CDB contained an
invalid entry.
Re-issue the command with valid
values in the CDB.
05h 25h 00h 01h
Illegal Request
Logical Unit Number (LUN) Not
Supported
The LUN was not zero.
Re-issue the command with the
LUN set to zero.
05h 3Bh 0Dh 08h
Illegal Request
Move Command—Destination
Storage Bin was Full
The storage bin already contains a
cartridge.
Read Element Status to determine
storage bin status.
05h 3Bh 0Dh 1Fh
Illegal Request
Move Command—Destination
Tape Drive was Full
The tape drive already contains a
cartridge.
Read Element Status to determine
tape drive status.
05h 3Bh 0Eh 07h
Illegal Request
Move Command—Source Storage
Bin was Empty
There is no cartridge in the storage
bin.
Read Element Status to determine
storage bin status.
05h 3Bh 0Eh 1Eh
Illegal Request
Move Command—Source Tape
Drive was Empty
There is no cartridge in the tape
drive.
Read Element Status to determine
tape drive status.
Table A-4. Vendor-Specific ACL Condition Codes (Continued)
ACL
Sense ASC ASCQ Condition
Key Code
Condition Reported Recovery Procedure