Datasheet

Dubox™ Crimp-to-Wire Contacts
2.54 mm
Technical / Application Support / Drawings / Specifications / Samples: www.fciconnect.com/basics
18
■ The Dubox™ contact has a pre-
stressed, dual beam design to
enable low insertion force.
■ Mates with very short pins ( 5 mm)
■ Universal crimp barrel accomodates
wires from AWG 22-30
■ Selective plating
Technical Data
Physical
Contact: phosphor bronze
Plating: 0.76µm Gold over 1.27 µm nickel
5.0 µm tin-lead
Electrical Performance
Current rating: 3 A continuous
Contact resistance after environmental test:
15 mΩ max. – Contact
Dielectric withstanding voltage: 1000 V rms
Mechanical Performance
Mating cycles (durability): 200 – Gold
Insertion force gold finish contact: 1.3 N
Withdrawal force (min) gold finish contact: 0.3 N
Operating Temperature Range
-65°C to +125°C
Packaging
Reels
Boxes – Loose piece
Reference Information
File no. E66906
File no. LR46923
Product drawing: By 5-digit base part number
Product specification: BUS-12-055 – Contact
Application specification: TA-317, TA-340
Specifications subject to change without notice.
Typical Applications
Insertion Depth
Mating Data
■
BergStik® unshrouded straight headers
■
BergStik® unshrouded right angle headers
■
Dubox™ shrouded vert./ra. headers
Insertion Depth
■
Discrete Wire: 3.56 mm min. to 5.59 mm max.
[provides .381 mm wipe]
■
Crimp-to-Wire Housing: 5.08 mm min.
to 6.22 mm max.
[provides .381 mm wipe in housing]
Page
8
10
22