BergStik® Unshrouded Headers 2.54 mm ■ High temperature plastic ■ Selective plating 7.20 mm for increased board density Technical Data Mating 2.54 mmData (.100" ) Physical Operating Temperature Range Housing: High temperature, black thermoplastic Flammability rating: UL 94 V-0 Pin: Phosphor-bronze Plating: Gold or tin-lead over 1.27 µm nickel -65°C to +125°C Electrical Performance Current rating: 3 A continuous Insulation resistance: 5000 MΩ min.
BergStik® Unshrouded Headers 2.54 mm Part Number Plating 5-Digit Base Part Number Pin Style Option Total Positions 01 03 02 04 08 Through mount 77311 = Single Row 77313 = Double Row Through mount Surface mount Surface 95293 = 95278 = 98401 = mount Single Row Double Row Double Row with pegs Pin style 01 02 1 = 0.76 µm gold on mating area, tin-lead on solder side 4 = 3.81 µm tin-lead 8 = 0.38 µm gold on mating area, tin-lead on solder side Mating Pin style Mating Solder OAL 5.84 8.
BergStik® Unshrouded Headers 2.54 mm ■ High temperature plastic ■ Selective plating Technical Data Mating Data Page Physical Operating Temperature Range ■ Dubox™ Crimp-to-wire contacts Housing: High temperature, black thermoplastic Flammability rating: UL 94 V-0 Pin: Phosphor-bronze Plating: Gold or tin-lead over 1.27 µm nickel -65°C to +125°C ■ Dubox™ Crimp-to-wire housings Electrical Performance Current rating: 3 A continuous Insulation resistance: 5000 MΩ min.
BergStik® Unshrouded Headers 2.54 mm Part Number 5-Digit Base Part Number Plating Pin Style Total Positions Through mount 77315 = Single Row 77317 = Double Row 01 to 36 = Single row TMT 02 to 72 = Double row TMT Pin style 77315 01 18 24 77317 Mating Solder 03 04 12 5.84 5.84 6.75 2.41 3.05 2.90 1 = 0.76 µm gold on mating area, tin-lead on solder side 4 = 3.81 µm tin-lead 8 = 0.
BergStik® Unshrouded Stacking Headers 2.54 mm ■ Wide variety of stack heights in 0.5 mm increments ■ High temperature plastic ■ Selective plating Technical Data Mating Data Page Physical Operating Temperature Range ■ Dubox™ Vertical receptacles Housing: High temperature, black thermoplastic Flammability rating: UL 94 V-0 Pin: Phosphor-bronze Plating: Gold or tin-lead over 1.
BergStik® Unshrouded Stacking Headers 2.54 mm Part Number 5 4 Lead Solder Side Option 1 = Through Hole (TMT) 2 = Surface Mount (SMT) Row Option Plating Total Positions Pin Style 1 = Single Row (TMT only) 2 = Double Row 1 = 2.41 2 = 3.05 4 = SMT (double row only) 1 = 0.76 µm gold on mating area, tin-lead on solder side 4 = 3.81 µm tin-lead 8 = 0.
Quickie™ Shrouded Low Profile Headers 2.54 mm ■ Selective plating ■ Recessed pins assure proper alignment and eliminate damage during mating ■ End windows for latching with IDC receptacle Recessed pins End windows Mating Data Technical Data Physical Operating Temperature Range ■ Dubox™ Crimp-to-wire contacts Housing: Glass filled, thermoplastic polyester, blue Flammability rating: UL 94 V-0 Pin: Phosphor-bronze Plating: Gold or tin-lead over 1.
Quickie™ Shrouded Low Profile Headers 2.54 mm Part Number Plating 5-Digit Base Part Number Through mount 75869 = Straight 75867 = Right angle 1 = 0.76 µm gold on mating area, tin-lead on solder side 2 = 3.81 µm tin-lead 3 = 0.38 µm gold on mating area, tin-lead on solder side Total Positions 30 31 32 01 02 03 04 05 33 06 07 08 09 10 = = = = = = = = = = = = = = 4 pos. 6 pos. 8 pos. 10 pos. 14 pos. 16 pos. 20 pos. 26 pos. 30 pos. 34 pos. 40 pos. 50 pos. 60 pos. 64 pos.
Quickie™ Shrouded Eject Latch Headers 2.54 mm ■ Selective plating ■ Recessed pins assure proper alignment and eliminate damage during mating Mating 2.54 mmData (.100" ) Technical Data Physical Operating Temperature Range ■ Dubox™ Crimp-to-wire contacts Housing: Glass filled, thermoplastic polyester, gray Flammability rating: UL 94 V-0 Pin: Phosphor-bronze Plating: gold over 1.
Quickie™ Shrouded Eject Latch Headers 2.54 mm Part Number Latch Style 5-Digit Base Part Number Through mount 71918 = Straight 71922 = Right angle 1 = Standard (mates with IDC Receptacle Strain Relief 0,2 2 = Low Profile (mates with IDC Receptacle without Strain Relief Total Positions 06, 08, 10, 14, 16, 18, 20, 26, 30, 34, 40, 44, 50, 60, 64 Part Number Plating = 0.76 µm gold on mating area, tin-lead on solder side 71918 1 Total Pos. 71922 1 Total Pos.
Dubox™ Crimp-to-Wire Contacts 2.54 mm ■ The Dubox™ contact has a pre- stressed, dual beam design to enable low insertion force. ■ Mates with very short pins ( 5 mm) ■ Universal crimp barrel accomodates wires from AWG 22-30 ■ Selective plating Mating Data Technical Data Page Physical Operating Temperature Range ■ BergStik® unshrouded straight headers Contact: phosphor bronze Plating: 0.76µm Gold over 1.27 µm nickel 5.
Dubox™ Crimp-to-Wire Contacts 2.54 mm Part numbers / Contacts on Reel Wire size insulation O.D. 22-30 22-30 22-30 20-22 20-22 0.90 0.90 0.90 1.10 1.10 - Selective Plated 76347-301 76347-302• 76347-303 76347-311 76347-312• 1.50 1.50 1.50 1.60 1.60 Tin-lead plated 76347-401 76347-402• 76347-403 76347-411 76347-412• Packaging 15.000/reel 15.000/reel 500/reel 15.000/reel 15.000/reel Part numbers / Contacts loose Piece Wire size insulation O.D. 22-30 0.90 - 1.
Dubox™ Crimp-to-Wire Housings 2.54 mm ■ For use with Dubox™ crimp-to-wire contacts ■ Stackable end-to-end ■ Passive latching, anti-reverse and anti-miss-match when used with Dubox™ shrouded headers ■ Contacts removable for easy repairability Technical Data Mating Data Physical Housing: Glass filled thermoplastic polyester, blue Flammability rating: UL 94 V-0 Electrical Performance Insulation resistance: 1x 105 MΩ min.
Dubox™ Crimp-to-Wire Housings 2.54 mm Part Number 5-Digit Base Part Number 0 Positions Per Row 65240 = Single row 65239 = Double row 02 up to 36 Part Number 65239 0 Pos. per row 65240 0 Pos. per row ■ Pin size: 0.62 mm square ■ Recommended pin length: 5.00 mm min. Dimensions in mm Technical / Application Support / Drawings / Specifications / Samples: www.fciconnect.
Dubox™ Shrouded Headers 2.54 mm ■ For use with Dubox™ crimp-to-wire housings ■ Stackable end-to-end ■ Passive latching, anti-reverse and anti-miss-match when used with Dubox™ crimp-to-wire housings ■ Selective plating Mating Data Technical Data Physical Operating Temperature Range ■ Dubox™ Crimp-to-wire contacts Housing: Glass filled thermoplastic polyester, blue Flammability rating: UL 94 V-0 Contact: Phosphor-bronze Plating: Gold or tin-lead over 1.
Dubox™ Shrouded Headers 2.54 mm Part Number 5-Digit Base Part Number 76384 76382 76385 76383 = = = = Single row, straight Single row, right angle Double row, straight Double row, right angle Plating Positions Per Row 02 up to 36 Part Number 3 = 0.76 µm gold on mating area, tin-lead on solder side 4 = 3.81 µm tin-lead 76384 3 Pos. per row 76385 3 Pos.
Dubox™ Vertical Receptacles 2.54 mm ■ The Dubox™ contact has a pre- stressed, dual beam design to enable low insertion force ■ Selective plating 8.50 mm Technical Data Mating Data Physical Operating Temperature Range 2.54 mm (.
Dubox™ Vertical Receptacles 2.54 mm Part Number 5-Digit Base Part Number 75915 71920 87606 89891 = = = = Single Row, Top Entry Single Row, Dual Entry Double Row, Top Entry Double Row, Dual Entry Plating Positions Per Row 02 to 50 3 = 0,76µm gold on mating area, tin-lead on solder side 4 = 5,0 µm tin-lead Recommended PCB Layout Dimensions in mm Technical / Application Support / Drawings / Specifications / Samples: www.fciconnect.
Dubox™ Low Profile Vertical Receptacles 2.54 mm ■ The Dubox™ contact has a pre- stressed, dual beam design to enable low insertion force ■ Selective plating Low profile 7.0 mm for closer board stacking Technical Data Mating Data Page Physical Operating Temperature Range ■ BergStik® Unshrouded straight headers Housing: Glass filled thermoplastic Flammability rating: UL 94 V-0 Contact: Phosphor-bronze Plating: Gold or tin-lead over 1.
Dubox™ Low Profile Vertical Receptacles 2.54 mm Part Number 5-Digit Base Part Number 76341 = Single Row, Top Entry 76342 = Double Row, Top Entry 71991 = Double Row, Dual Entry Plating Positions Per Row 02 to 50 3 = 0,76 µm gold on mating area, tin-lead on solder side 4 = 5,0 µm tin-lead Part Number 71991 3 Pos. per row 76341 3 Pos. per row 76342 3 Pos.
Dubox™ Low Profile Vertical Receptacles 2.54 mm ■ The Dubox™ contact has a pre- stressed, dual beam design to enable low insertion force ■ Selective plating ■ Floating solder tails self-center on circuit pads and assure coplanarity optional hold down Low profile 7.
Dubox™ Low Profile Vertical Receptacles 2.
Dubox™ Horizontal Receptacles 2.54 mm ■ The Dubox™ contact has a pre- stressed, dual beam design to enable low insertion force ■ Selective plating ■ Floating solder tails self-center on circuit pads and assure coplanarity Technical Data Mating Data Physical Mechanical Performance ■ BergStik® Unshrouded straight headers Housing: Blue thermoplastic – Through hole High temperature gray thermoplastic – Surface mount Flammability rating: UL 94 V-0 Contact: Phosphor-bronze Plating: Gold or tin-lead over 1.
Dubox™ Horizontal Receptacles 2.54 mm Part Number 5-Digit Base Part Number Plating 89882 = Through Hole (TH), Single Row 89883 = Through Hole (TH), Double Row 71607 = Surface Mount (SMT), Single Row 71609 = Surface Mount (SMT), Double Row Positions Per Row 02 to 50 (TH) 02 to 40 (SMT) 3 = 0,76 µm gold on mating area, tin-lead on solder side 4 = 5,0 µm tin-lead (TH only) Part Number 71609 3 Pos. per row 89883 3 Pos.
Quickie™ IDC Receptacles 2.54 mm ■ Single-piece design provides one of the lowest applied costs in the industry IDC Receptacles Mating Data Technical Data ■ BergStik® Unshrouded straight headers Physical Operating Temperature Housing: Gray thermoplastic Flammability rating: UL 94 V-0 Contact: Phosphor-bronze Plating: 0.76 µm Gold over 1.27 µm nickel -65°C to +105°C Electrical Performance Current rating: 1 A continuous Insulation resistance: 50,000 MΩ min. Contact resistance: 15 mΩ max.
Quickie™ IDC Receptacles 2.54 mm Part Number 7 5-Digit 1 Base6Part Number 0 Strain Relief 0 Total Positions 04, 06, 08, 10, 14, 16, 18 20, 24, 26, 30, 34, 40, 44, 50, 60, 64 0 1 2 6 = = = = Standard (Mates with Shrouded Eject Latch Header Latch 1) None (Mates with Shrouded Eject Latch Header Latch 2) Low Profile (Mates with Shrouded Eject Latch Header Latch 1) Latching (Mates with Low Profile Headers) Part Number 71600 0 Total pos. 71600 1 Total pos.
Quickie™ IDC 2-Row PCB Connectors 2.54 mm ■ Ideal for daisy chain applications ■ Single-piece design provides one of the lowest applied costs in the industry Technical Data Processing Information Physical Operating Temperature Housing: Blue thermoplastic Flammability rating: UL 94 V-0 Pin: Phosphor-bronze Plating: Tin-lead over 1.
Quickie™ IDC 2-Row PCB Connectors 2.54 mm Part Number 6 9 8 3 0 Total Positions 0 06 08 10 14 16 = = = = = 6 8 10 14 16 pos. pos. pos. pos. pos. 18 20 24 26 30 = = = = = 18 20 24 26 30 pos. pos. pos. pos. pos. 34 40 50 60 64 = = = = = 34 40 50 60 64 pos. pos. pos. pos. pos. Recommended PCB Layout Dimensions in mm Technical / Application Support / Drawings / Specifications / Samples: www.fciconnect.
Dubox™ Shunts 2.54 mm ■ Dual-beam contacts for added reliability ■ Slotted cut-out in low profile housing simplifies electrical testing ■ Side-by-side and end-to-end stackable Technical Data Mating Data Physical Operating Temperature ■ BergStik® Unshrouded vertical headers Housing: Glass filled thermoplastic polyester Blue or black Flammability rating: UL 94 V-0 Pin: Phosphor-bronze Plating: Gold or tin-lead over 1.
Dubox™ Shunts 2.54 mm Part Number 5-Digit Base Part Number 101 76264 = 0.76 µm gold plated, Colour body: Blue 76265 = tin-lead plated, Colour body: Blue 76438 = 0.76 µm GXT plated, Colour body: Black Dimensions in mm Technical / Application Support / Drawings / Specifications / Samples: www.fciconnect.
