Datasheet

ManualsBrandsAmphenol ICC ManualsConnectorsD-Sub male 9 Male IDC

DFR

CHARACTERISTICS

DESCRIPTIONAPPLICATIONS

D-Sub connectors - Stamped and Formed Contacts

DFR / E12

FLAT RIBBON

D-SUB CONNECTORS

These connectors are suitable for

compact requirement of modern

peripheral equipment.

Special contact design allows usage

of standard 1.27mm (.05") flat cable.

Suitable with all standard D-Sub hoods.

• Industrial

• Telecom

• Any industry standard

I / O connections

Specifications

• Connectors according to MIL C24308

Materials and Platings

Shells Steel with nickel plating

Insulator Glass-filled thermoplastic, UL 94V-0

Pin contacts Brass, selected gold in mating area;

2.54µm (100µ") min. tin

on termination area over

1.27µm (50µ") min. nickel

Socket contact Phosphor bronze, selected gold in

mating area; 2.54µm (100µ") min. tin

on termination area over 1.27µm

(50µ") min. nickel

Rear insert Brass, 2.54µm (100µ") min. nickel plated

Screwlock Brass, 2.54µm (100µ") min. nickel plated

Electrical Data

Current rating 5A

Voltage rating 250V AC/rms 60Hz

Withstanding voltage 1000V AC/rms 60Hz for one minute

Insulation resistance 1000MΩ

Contact resistance 20mΩ max

Climatic Data

Operating temperature -40°C to +125°C

Mechanical Data

Single contact insertion force 0.54kg (1.19lb) max

Single contact withdrawal force 0.06kg (0.13lb) min

Mating and unmating force

Unit: kg ( lb)

No. of Cts Mate (max) Unmate (min)

9 (size E) 3.05 (6.74) 0.36 (0.79)

15 (size A) 5.09 (11.24) 0.46 (1.01)

25 (size B) 8.44 (18.66) 0.81 (1.8)

37 (size C) 12.51 (27.65) 1.1 (2.47)

Standard plating thicknesses • gold flash

• 0.4µm (15µ") gold

• 0.76 µm (30µ") gold

Summary of content (4 pages)

PAGE 1
DFR D-Sub connectors - Stamped and Formed Contacts • Connectors according to MIL C24308 Materials and Platings Shells Insulator Pin contacts Socket contact Rear insert Screwlock DESCRIPTION Specifications These connectors are suitable for compact requirement of modern peripheral equipment. APPLICATIONS • Industrial Steel with nickel plating Glass-filled thermoplastic, UL 94V-0 Brass, selected gold in mating area; 2.54µm (100µ") min. tin on termination area over 1.27µm (50µ") min.
PAGE 2
12.55±0.38 (.494±.015) 7.9±0.13 (.311±.005) C±0.13 (.005) D±0.13 (.005) E±0.05 (.002) 2.84 (.112) 8.38±0.13 (.33±.005) B±0.13 (.005) POSITION #1 10° 17.68 (.696) 6.1 (.240) 5.9 (.232) X 17.48 (.688) 9 15 25 37 DIMENSIONS mm (inch) B C D A E X 30.84 (1.21) 24.99 (.984) 16.92 (.666) 16.24 (.639) 11.09 (.437) 2.74 39.24 (1.54) 33.32 (1.31) 24.70 (.972) 24.56 (.967) 19.39 (.763) 2.74 53.04 (2.09) 47.04 (1.85) 38.96 (1.53) 38.38 (1.51) 33.24 (1.31) 2.77 69.32 (2.73) 63.
PAGE 3
.4 (.134") M3 or #4-40 TECHNICAL DATA Panel mounting option ø3.05 (.120") Standard rivet ø 3.05mm no digit Threaded rear insert B/D 6.0 (.
PAGE 4
L ... ... FR ... ... ... ... C309 flash gold 17D: tinned shell for plug and receptacle 0.4µm (15µ”) 117D: tinned shell for plug and receptacle shell size: E,A,B,C Flat ribbon cable type mounting options: no digit = standard rivet ø 3.05mm A = front screwlock M3 C = front screwlock 4-40 B = rear insert M3 D = rear insert 4-40 Plating option: valid only for 0.76µm (30µ") part number must be written as follow: L 17D……………C309 or L 117D…………..