Datasheet

ManualsBrandsAmphenol ICC ManualsConnectorsCrimp contact male 0.09-0.25 mm² Plug

RR-HR

CHARACTERISTICS

DESCRIPTIONAPPLICATIONS

D-Sub connectors - Stamped and Formed Contacts

RR-HR / E11

REAR RELEASE

CRIMP CONNECTORS

Designed for high volume

production, Amphenol's rear

release crimp connector and

contacts provide significant cost

saving.

- EMI / RFI shell configuration.

- Removable, reusable contacts.

- Automatic and manual tooling

available.

• Commercial

• Industrial

• Telecom

• Any industry standard

I / O connections

Simplify

your cable

assemblies

Simplify

your cable

assemblies

Specifications

• Connectors according to MIL C24308

Mechanical Data

Mating and unmating force

Unit: kg ( lb)

No. of Cts Mate (max) Unmate (min)

RR HR RR HR RR HR

9 (size E) 15 (size E) 3.05 (6.74) 3.81 (8.42) 0.36 (0.79) 0.52 (1.14)

15 (size A) 26 (size A) 5.09 (11.24) 5.95 (13.16) 0.46 (1.01) 1.05 (2.32)

25 (size B) 44 (size B) 8.44 (18.66) 9.26 (20.46) 0.81 (1.8) 1.37 (3.02)

37 (size C) 62 (size C) 12.51 (27.65) 13.48 (29.78) 1.1 (2.47) 1.76 (3.88)

50 (size D) 78 (size D) 14.65 (32.38) 15.82 (34.96) 1.6 (3.56) 2.02 (4.46)

Contacts Under plating Crimp side

0.2µm (8µ") gold 2µm (78µ") nickel gold flash or tin

0.5µm (20µ") gold 2µm (78µ") nickel gold flash or tin

0.76µm (30µ") gold 2µm (78µ") nickel gold flash or tin

Materials and Platings

Shells Tinned steel with or without dimples

on plug connector

Insulator Black glass-filled thermoplastic, UL 94V-0

Boardlock Brass, 3µm up to 5µm (118µ"up to 197µ")

tinned over nickel 2µm up to 3µm

(78µ" up to 118µ")

Screwlock Brass, 6µm up to 10µm (236µ" up to 394µ")

tinned over nickel 2µm up to 3µm

(78µ" up to 118µ")

Electrical Data

Current rating 5A

Voltage rating 500V AC/rms 50Hz

Withstanding voltage RR: 1000V AC/rms 50Hz for 1 minute

HR: 1000V AC/rms 60Hz for 1 minute

Insulation resistance RR: 5000MΩ

HR: 1000MΩ

Contact resistance 10mΩ max

Wire size 20-28 AWG max insulation

Ø1.27mm (.05")

Climatic Data

Operating temperature -55°C to +125°C

Summary of content (8 pages)

PAGE 1
RR-HR D-Sub connectors - Stamped and Formed Contacts Materials and Platings Shells Tinned steel with or without dimples on plug connector Black glass-filled thermoplastic, UL 94V-0 Brass, 3µm up to 5µm (118µ"up to 197µ") tinned over nickel 2µm up to 3µm (78µ" up to 118µ") Brass, 6µm up to 10µm (236µ" up to 394µ") tinned over nickel 2µm up to 3µm (78µ" up to 118µ") Insulator Boardlock Screwlock Contacts Under plating Crimp side 0.2µm (8µ") gold 2µm (78µ") nickel gold flash or tin 0.
PAGE 2
12.55±0.38 (.494±.015) 7.9±0.13 (.311±.005) B±0.13 (.005) C±0.13 (.005) D±0.13 (.005) E±0.05 (.002) 2.84 (.112) 8.38±0.13 (.33±.005) A±0.38 (.015) POSITION #1 10° ø3.05 (.120) X F±0.13 (.005) 10.72 (.422) 5.8 (.228) 10.9 (.429) numbered cavities 6.1 (.240) SOCKET 11.2 (.441) 11 (.433) 5.9 (.232) PLUG DIMENSIONS mm (inch) A B C D E F X 9 30.84 (1.21) 24.99 (.98) 16.92 (.67) 16.24 (.64) 11.09 (.44) 19.28 (.76) 2.74 15 39.24 (1.54) 33.32 (1.31) 24.7 (.972) 24.56 (.97) 19.
PAGE 3
B±0.13 (.005) C±0.13 (.005) 1.98 (.078) D±0.13 (.005) 1.98 12.55±0.38 (.494±.015) 7.9±0.13 (.311±.005) 8.38±0.13 (.33±.005) A±0.38 (.015) POSITION #1 10° OVERALL DIMENSIONS High density HR ø3.05 (.120) 2.29±0.05 (.09±0.002) E±0.13 (.005) 5.2 (.205) 10.3 (.406) numbered cavities 11.2 (.441) SOCKET 6.1 (.240) 5.9 (.232) 11 (.433) PLUG 10.72 (.422) DIMENSIONS mm (inch) Nb OF CONTACTS A B C D E 15 30.84 (1.21) 24.99 (.98) 16.92 (.67) 16.24 (.64) 19.28 (.76) 26 39.24 (1.
PAGE 4
6 (.236) Standard density: M3 or #4-40 front screwlock ø3.1 (.122") M3 or #4-40 3.4 (.134”) Fixed front female screwlock VF / VFM Standard rivet ø 3.1mm no digit Threaded rear insert H/G M3 or #4-40 4.5 (.177) High density: ø3.05 (.120") Standard rivet ø3.05mm no digit Threaded rear insert H/G 6 (.
PAGE 5
Standard density: 9.9 (.390") 4.7 (.185") 9.4 (.370") A C B ø2.1 (.083") ø1.03 (.041") 1.75 (.069") TECHNICAL DATA Contacts 4.7 (.185") AWG A B C 20-24 1.8 (.071”) 1.9 (.075”) 2.5 (.098”) 24-28 1.4 (.055”) 1.5 (.059”) 1.7 (.066”) A ø2.1 (.083") 1.75 (.069") High density: 7.7 (.303") 6.15 (.242") 6.15 (.242") 7.3 (.287") 1.55 (.061”) 5 ø1.5 (.059”) 0.9 (.035") RR-HR / E11 1.55 (.061”) 1.3 (.051") ø1.55 (.061”) 1.65 (.065") ø0.76 (.030”) 0.95 (.
PAGE 6
TECHNICAL DATA How to order RR (standard density) Housings L ..... RR ..... ..... ..... ..... ..... RoHS Compliant front mounting type: VF = front screwlock 4-40 VFM = front screwlock M3 177: tinned shell for receptacle 777: tinned shell + dimples for plug contact type: P = pin S = socket shell size: E,A,B,C,D Rear mounting type: H = rear insert 4-40 G = rear insert M3 no digit = standard rivet ø3.1mm F = float mounting configuration: 09,15,25,37,50 Contacts L 17 RR ..... ..... ..... .....
PAGE 7
HOW TO ORDER How to order HR (high density) Housings L ..... HR ..... ..... ..... ..... ..... RoHS Compliant front mounting type: VF = front screwlock 4-40 VFM = front screwlock M3 177: tinned shell for receptacle 777: tinned shell + dimples for plug contact type: P = pin S = socket shell size: E,A,B,C,D Rear mounting type: H = rear insert 4-40 G = rear insert M3 no digit = standard rivet ø3.05mm configuration: 15,26,44,62,78 Contacts L 17 HR D2 ..... ..... .....
PAGE 8
For standard density crimp contacts: 17RR series 17D 438 SP 17D 440 SP FA 0000 762 FA 0000 104 FA 0000 102 FE 0400 970 MC 968 MC 972 MC For high density crimp contacts: 17HR series • automatic crimp machine for reels of 2000 to 10000 contacts crimp dies: AWG 24 to 28 970 MC 973 MC Do not hesitate to contact us for further information Amphenol IT & Communication Products Block A3/A4, The 4th Industrial District of Industrial Headquarters, Dong Keng Road Gong Ming Town, Shen Zhen China Fax:+86(0)755 2754