Datasheet

21
Amphe-Lite Series
application tools
Contact
Size/Type
Crimping
Tool
Turret Die
or Positioner
12 Pin and Socket M22520/1-01 M22520/1-04
16 Pin and Socket
M22520/1-01
M22520/7-01
M22520/1-04
M22520/7-04
20 Pin and Socket
M22520/1-01
M22520/2-01
M22520/7-01
M22520/1-04
M22520/2-10
M22520/7-08
22D Pin
M22520/2-01
M22520/7-01
M22520/2-09
M22520/7-07
22D Socket
M22520/2-01
M22520/7-01
M22520/2-07
M22520/7-05
8 Twinax Center
Pin and Socket
M22520/2-01 M22520/2-37
8 Twinax Intermediate
Outer Pin & Socket
M22520/5-01 M22520/5-200
The following data includes information pertaining to the application tools which have been estab-
lished for crimping, inserting, and removing contacts incorporated in the Amphe-Lite Series con-
nectors. For additional information on coaxial contact tools see catalog 12-130.
All crimping tools included are the “full cycling” type.
There is a possibility of additional crimping tools other than those included being available at
present or in the future for this specific application.
RECOMMENDED CRIMPING TOOLS
Contact
Size/Type
Crimping
Tool
Turret Die
or Positioner
8 Coaxial Inner
Pin and Socket
M22520/2-01 M22520/2-31
8 Coaxial Outer Pin
and Socket
M22520/5-01
M22520/5-05
Die Closure B
M22520/5-01
M22520/5-41
Die Closure B
M22520/10-01
M22520/10-07
Die Closure B
16 Coaxial Inner
Pin and Socket
M22520/2-01 M22520/2-35
16 Coaxial Outer
Pin and Socket
M22520/4-01 M22520/4-02
12 Coaxial Inner
Pin and Socket
M22520/2-01 M22520/2-34
12 Coaxial Outer
Pin and Socket
M22520/31-01 M22520/31-02
10 (Power) TP201423 1716P-1
Where 2 or 3 tools are listed for a contact size, only one tool and its die or positioner are
required to crimp the contact.
The above crimping tools and positioners are available from the approved tool manufacturer.
INSERTION TOOLS
Use with
Contact
Size
Plastic Tools Metal Tools
MS
Part Number Color
Angle Type
Straight Type
Proprietary
Part Number Color
MS
Part Number
Proprietary
Part Number
10 (Power) M81969/14-05* Gray / (White) M81969/8-11 † † Green
12 M81969/14-04* Yellow / (White) M81969/8-09 11-8674-12 11-8794-12 Yellow
16 M81969/14-03* Blue / (White) M81969/8-07 11-8674-16 11-8794-16 Blue
20 M81969/14-10* Red / (Orange) M81969/8-05 11-8674-20 11-8794-20 Red
22D M81969/14-01* Green / (White) M81969/8-01 11-8674-24 11-8794-24 Black
8 Coaxial None Required
8 Twinax None M81969/46-06** None Red
REMOVAL TOOLS
Use with
Contact
Size
Plastic Tools Metal Tools
MS
Part Number Color
For Unwired
Contacts
Proprietary
Part Number
Angle Type
Straight Type
Proprietary
Part Number Color
MS
Part Number
Proprietary
Part Number
10 (Power) M81969/14-05* (Gray) / White † M81969/8-12 † † Green / White
12 M81969/14-04* (Yellow) / White 11-10050-11 M81969/8-10 11-8675-12 11-8795-12 Yellow / White
16 M81969/14-03* (Blue) / White 11-10050-10 M81969/8-08 11-8675-16 11-8795-16 Blue / White
20 M81969/14-10* (Orange)/ Red 11-10050-9 M81969/8-06 11-8675-20 11-8795-20 Red / White
22D M81969/14-01* (Green) / White 11-10050-7 M81969/8-02 11-8675-24 11-8795-24 Green / White
8 Coaxial M81969/14-12 Green None None 11-9170 DRK264-8†† N/A
8 Twinax M81969/14-12 Green None M81969/46-12** 11-9170 N/A N/A
The M81969/8, 11-8674, 11-8675,and 11-8794 metal contact insertion and removal tools will accommodate wires having the maximum outside diameter as fol-
lows: Contact size 12–.155, 16–.109, 20–.077, 22D–.050. When wire diameters exceed those specified, the plastic tools must be used.
* Double end insertion/removal tool.
** Twinax insertion tools are available only in a straight type, metal version.
† To be determined.
†† Contact Daniels Manufacturing Co. for availability.
21