Brochure

AT Series
™
Specifi cations
Hyperbolic Contacts
1 10
Product Material
HOUSINGS
Thermoplastic
SEALS
Silicone Elastomer
SECONDARY LOCKS
Thermoplastic
CONTACTS
Copper Alloy, Nickel Plated, Gold optional
INTERCONNECTINGYOURWORLD
Stamped and Formed - Size 16
PINS SOCKETS
Part Numbers AWG Range
Recomm’d
Strip Length
Material Part Numbers AWG Range
Recomm’d
Strip Length
Material
AT60-14-0122
14-16
.125 - .175
Nickel AT62-14-0122
14-16
.125 - .175
Nickel
AT60-14-0144 Gold AT62-14-0144 Gold
AT60-16-0122
16-18
Nickel AT62-16-0122
16-18
Nickel
AT60-16-0144 Gold AT62-16-0144 Gold
AT60-16-0622
18-20
Nickel AT62-16-0622
18-20
Nickel
AT60-16-0644 Gold AT62-16-0644 Gold
AT and AHD Series
™
Accessories
Pin Contacts, Socket Contacts and Tooling
Listed below are quick-reference illustrations for RockSolid
™
and stamped and formed crimp options, as well as
the Amphenol Sine Systems part numbers.
Crimp Die (Stamped & Formed Contacts)
P/N: MFX 3950
Sealing Plug (Size 16)
P/N: A114017
RockSolid
™
Gold Contacts
Part Numbers
(Fits AT Series
™
and AHD Series
™
)
Size/
Type
A
Max
B
Min
C
Max
D
Min
AWG Range
Recomm’d
Strip Length
65-54942-14 16 SOC .759 .073 .106 .250 14 .250-.312
65-54942-16 16 SOC .759 .068 .103 .250 16 .250-.312
65-54942-20 16 SOC .759 .048 .078 .172 20 .250-.312
A
D
BC
SOCKET CONTACT
Longer contact life
Lower contact resistence
Immunity to shock and vibration
Low insertion and extraction forces
Contact area extends 360° around pins
•
•
•
•
•
AT Series
™
Connectors
The connector design incorporates an integral latching system that ensures a defi nitive electrical and mechanical
connection
Connector housings are manufactured with a thermoplastic material that is not only durable, but has excellent UV
resistance, dielectric/mechanical properties and environmentally RoHS compliant
The sealing system is comprised of a front and rear silicone, multi-sealing, perimeter against environmental ingress
Contacts are derived from quality copper alloy to ensure an electrically-reliable connection. For applications
demanding higher levels of performance, you can rely on our RockSolid™ contact technology
•
•
•
•
Performance Criteria NOTE: All testing meets SAE J2030 specifi cations
CURRENT CAPACITY No. 16, 13 amps (max)
WIRE RANGE No 16 contacts will accept wire ranges of 14 thru 20 awg
TEMPERATURE Operating temperature range: -55°C to +125°C at rated current
DIELECTRIC VALUE Meets or exceeds 1500 volts minimum
FLAME RESISTANCE All dielectric materials have a fl ammability rating of UL94 V-0 or better
DROP TEST Shall not become detached or loosened when placed at 750mm and dropped to concrete eight times
SHOCK No latch disengagement or discontinuity shall be the result when subjected to 50 g’s in each of three axis (X, Y & Z)
VIBRATION Continued continuity without degradation to mechanical or physical attributes following vibration. (max acceleration
20 g’s at Sine sweep of 10-2000Hz)
CONNECTOR TERMINAL RETENTION When subjected to a direct pull, size 14-20 achieves minimum pull-out force of 110 newtons
CONNECTOR RETENTION A mated connector subjected to a pulling force by the exiting wire bundle at 111 newtons times the number of contacts
to a maximum of 444 newtons applying load for 30 seconds
THERMAL SHOCK Subjected to 10 cycles at 55°C to +125°C with no cracking, chipping or other damage detrimental to the normal opera-
tion of the connector
INSULATION RESISTANCE Insulation resistance at 25°C shall be greater than 20 megohms when 1000 VDC are applied
MATING CYCLE DURABILITY Following 100 cycles of connection engagement and disengagement, degradation either mechanical or electrical is
not evident
CONTACT MILLIVOLT DROP No. 16 contacts with 16 awg conductor - *100 millivolt drop max at 13 amps test current
ULTRAVIOLET EFFECTS Test the mated connectors for 1000 hours per ASTM G 154 or ASTM G 153 with 20 hours UV and 4 hours of condensation
for each cycle
WATER IMMERSION A mated connection, properly wired, placed in an oven at +125°C for 1 hour, then placed immediately in a depth of
water of 1 meter for 4 hours without loss of electronic performance
All measurements in Inches