Datasheet

25
eco | mate
m
Technical Information
Order Information
Color coding Crimp version
Backshells of cable connectors are available in diff erent colors upon
request. Min order quantity = 1000 pcs. per type.
Order number do not include crimp contacts. Please order separately
(see page 20).
Mechanical coding Crimp tooling
Achieved by special coding pins which are inserted into contact
cavities. Min. order quantitiy = 1000 pcs. per type.
Ask for our catalogue “Tools”.
Structure of part number
C016 30 D 006 1 00 10
Series Termination technique
10 = Crimp (6 + PE)
20 = Screw (3 + PE)
30 = Solder (6 + PE)
Style
H = Male cable connector
D = Female cable connector
K = Right angled
male cable connector
F = Right angled
female cable connector
C = Male receptacle
G = Female receptacle
P = Male receptacle
No. of Poles
003 = 3 + PE
006 = 6 + PE
Contact Plating
1 = silver plating
2 = gold plating
0 = without contacts
Strain relief
00 = receptacle or
cable connector
with
clamping ring
10 = cable connector
with internal
cable clamp
Version
10 = cable connector
in blue/
black
12 = cable or
receptacle
connector
in blue
Screw termination
Screw clamps are designed acc. to EN 60999-1/VDE
06095.1. Chart 1 below shows the screw size depending
on wire size and the required clamping and testing torque.
Diagram 1 below shows the range of tensile strength for a screw
connection with a clamp screw M3, fastened with a torque of 50
Ncm, depending on the wire size.
Chart 1 Diagramm 1
Wire size (mm
2
)
1.5 2.5
Screw size
M 3 M 3
Test torque (Ncm)
max. 50 max. 50
Conversion AWG - mm
2
The comparison chart 2 below allows a cross reference between
American Wire Gauge (AWG) and metric wire sizes (mm2).
Chart 2
AWG Wire composition Wire diameter Wire size AWG Wire composition Wire diameter Wire size
30 1 x 0.25 0.25 mm 0.05 mm
2
20 1 x 0.81 0.81 mm 0.52 mm
2
7 x 0.10 0.36 mm 0.06 mm
2
7 x 0.32 0.97 mm 0.56 mm
2
28 1 x 0.32 0.32 mm 0.08 mm
2
19 x 0.20 1.02 mm 0.62 mm
2
7 x 0.13 0.38 mm 0.09 mm
2
18 1 x 1.02 1.02 mm 0.79 mm
2
26 1 x 0.40 0.40 mm 0.13 mm
2
19 x 0.25 1.27 mm 0.96 mm
2
7 x 0.16 0.48 mm 0.14 mm
2
16 19 x 0.29 1.44 mm 1.23 mm
2
19 x 0.10 0.51 mm 0.15 mm
2
14 19 x 0.36 1.80 mm 1.95 mm
2
24 1 x 0.51 0.51 mm 0.21 mm
2
12 19 x 0.46 2.29 mm 3.09 mm
2
7 x 0.20 0.61 mm 0.23 mm
2
10 37 x 0.40 3.10 mm 4.60 mm
2
19 x 0.13 0.64 mm 0.24 mm
2
8 133 x 0.29 4.0 mm 8.80 mm
2
22 1 x 0.64 0.64 mm 0.33 mm
2
6 133 x 0.36 5.5 mm 13.5 mm
2
7 x 0.25 0.76 mm 0.36 mm
2
19 x 0.16 0.81 mm 0.38 mm
2
It is to be noted that wires of the same AWG number but with different
composition have slightly different mm
2
.
Tensile strength
Wire gauge