Datasheet

20
MS/DS R-Class
Amphenol
R
Amphenol MIL-C-5015 Connectors
Specification requirements for greater reliability in a shorter,
lighter weight environmental resistant connector led to the
design of the MS-R.
These low profile assemblies were attained by moving the
axial compression nut and grommet assembly forward and
flash with the rear of the insert.
The silicon rubber grommet, with its low coefficient of
friction, assures easier threading of wire bundles and
quicker assembly and serviceability of the unit.
Molded webs in each wire hole insure a moisture barrier
around each wire.
The addition ‘O’ring at the main joint of all MS3106R plugs
provide a main joint seal supplementary to interfacial seal,
thus insuring of higher degree of reliability when connectors
halves from different sources are employed.
MS-R types are recommended for new design applications.
Shells:
Shell component are fabricated from high grade aluminum
alloy. All components have the standard electrically zinc
plated finish with an olive drab chromate after treatment for
corrosion resistance. Consult Amphenol Daeshin for other
plating options.
Contacts:
Contacts are machined from copper alloy for maximum
current carrying capacity and low millivolt drop.
Inserts:
Resilient synthetic rubber insert provide an outstanding
moisture barrier, maximum vibration resistance and high
dielectric strength. Either pin or socket insert can be
pressurized.
Wall Mounting Receptacle
Cable connecting Receptacle
Box Mounting Receptacle
Straight Plug
Right Angle Plug