Datasheet

Amphenol
R
42
Amphenol MIL-C-5015 Connectors
MS Basic Construction
Amphenol MIL-C-5015 connectors meet the latest performance requirements of MIL-C-5015.
These connectors represent well-proven electrical capability at an acceptable cost for most equipment where
durability is important. MIL-C-5015 features threaded coupling & single key & keyway polarization
representing maximum simplicity in design. Applications include industrial machines, military ground support
equipment, ordnance & shipboard installation. Amphenol MIL-C-5015 connectors are available in classes A,
B, E/F, R, and also offer a range of pre-earth connectors.
Therefore, you will always find the right connector in Amphenol, with us, for conditions & performance
requirements you may have.
1. Characterics
2. Dielectric with standing voltage
3. Contact engagement and seperation forces
5. Wire range accommodations
Insulation resistance. 5,000 Mega ohms minimum(at 25 °C)
Temperature range -55°C to 125°C
Durability 500 Cycle connection/Disconnection
Service rating Test voltage AC(rms)
Operating voltage
AC DC
Inst 1,000 200 250
A 2,000 500 700
D 2,800 900 1,250
E 3,500 1,250 1,750
B 4,500 1,750 2,450
C 7,000 3,000 4,200
Contact mating Minimum separation
Maximum average Maximum average
end size force(ounce)
engagement engagement
force (ounce) force (ounce)
#16 2 24 30
#12 3 24 30
#8 5 - 160
#4 10 - 240
#0 15 - 320
Size A.W.G
Wire normal Dielectric material
square size(㎟) outer diam.
#16 #22~#16 ≤1.3 1.7~3.3
#12 #14~#12 ≤3.5 2.9~4.3
#8 #10~#8 ≤8.0 4.2~6.4
#4 #6~#4 ≤22.0 7.0~9.4
#0 #2~#0 ≤50.0 10.6~14.0
4. Electrical data
Rated Current Contact resistance
(Mated with Test current Potential
insulators) DC A Drop(Max) mV
#16 1.6 1.9 13A 13A 49
#12 2.4 3.0 23A 23A 42
#8 3.6 5.4 46A 46A 26
#4 5.7 8.4 80A 80A 23
#0 9.1 12.2 150A 150A 21
Contact size
Pin contact
Diam,
Solder Pot
Diam,