Datasheet

27
PT-SE. SP-SE, MS/PT-SE
Contact Specications
Contact
Size
Test
Current
Maximum
Millivolt
Drop†
Crimp Well
Diameter
Minimum
Well Depth
20 7.5 55 .049 ±.001 .267
16 13.0 49 .067 ±.001 .236
12 23.0 42 .100 ±.002 .236
Service Rating
Service
Rating
Recommended
Operating
AC Voltage
at Sea Level
Test Voltage AC (RMS), 60 cps
Sea
Level
50,000
ft.
70,000
ft.
110,000
ft.
I 600 1,500 500 375 200
II 1,000 2,300 750 500 200
† Silver plated wire per MIL-DTL-26482
PT-SE and SP-SE Service Classes
PT-SE and SP-SE connectors are available in the three
service classes listed below.
“SE” Open wire sealing - environmental resistant,
with a nut and grommet for moisture proo ng
individual wires
“SE” (SR) Strain relief clamp - environmental resistant
strain relief clamp and grommet for moisture
proong individual wires; provides added
wire bundle support
“SP” Translucent nylon boot for retaining cus tomer
applied potting compounds; held in place by
a threaded ring
MS/PT-SE Service Classes
MS-SE series connectors are available in the following
certied service classes:
“E” Open wire sealing - environmental resisting
connectors are supplied with a multi-hole
grommet and clamping nut for moisture
proong individual open wires
“F” Environmental resistant strain relief clamp
and grommet for moisture proong individual
wires; provides added wire bundle support
“P” Potting applications - these connectors are
supplied with a translucent nylon boot for re-
tention of customer applied potting com-
pound
“SE”,
MS / “E”
open wire seal
“SE” (SR),
MS / “F”
strain relief
clamp
“SP”,
MS / “P”
potting boot